Influence of curing temperature on freeze-thaw resistance of limestone powder hydraulic concrete

[1]  Junnian Liu,et al.  Influence of curing temperatures on the performances of fiber-reinforced concrete , 2022, Construction and Building Materials.

[2]  C. Shi,et al.  Effect of temperature on CO2 curing, compressive strength and microstructure of cement paste , 2022, Cement and Concrete Research.

[3]  C. Jaturapitakkul,et al.  Strength, fluid transport and microstructure of high-strength concrete incorporating high-volume ground palm oil fuel ash blended with fly ash and limestone powder , 2022, Journal of Building Engineering.

[4]  Fuheng Ma,et al.  Crack extension resistance of steam-cured concrete under different curing temperature conditions , 2022, Theoretical and Applied Fracture Mechanics.

[5]  Lijun Sun,et al.  Influence of curing temperature on the hydration and strength development of Class G Portland cement , 2022, Cement and Concrete Research.

[6]  Arun C. Emmanuel,et al.  Influence of curing temperature on hydration and microstructural development of ordinary Portland cement , 2022, Construction and Building Materials.

[7]  Jianwen Bai,et al.  Damage degradation model of aeolian sand concrete under freeze–thaw cycles based on macro-microscopic perspective , 2022, Construction and Building Materials.

[8]  Zili Zhang,et al.  Dynamic and static interfacial bonding properties of CFRP–concrete subjected to freeze–thaw cycles , 2022, Structures.

[9]  Zhenqing Wang,et al.  Study on dynamic compressive mechanical properties of freeze-thaw concrete , 2022, Construction and Building Materials.

[10]  Zihao Liu,et al.  A study on engineering properties and environmental impact of sustainable concrete with fly ash or GGBS , 2022, Construction and Building Materials.

[11]  R. Snellings,et al.  Hydration kinetics of ternary slag-limestone cements: Impact of water to binder ratio and curing temperature , 2022, Cement and Concrete Research.

[12]  Linhua Jiang,et al.  Effect of polyacrylamide on the carbonation behavior of cement paste , 2022, Cement and Concrete Research.

[13]  M. Maslehuddin,et al.  Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: An experimental and statistical study , 2022, Case Studies in Construction Materials.

[14]  O. Bayraktar,et al.  The effect of recycled fine aggregates treated as washed, less washed and unwashed on the mechanical and durability characteristics of concrete under MgSO4 and freeze-thaw cycles , 2022, Journal of Building Engineering.

[15]  Hao Zeng,et al.  Effect of limestone powder and fly ash on the pH evolution coefficient of concrete in a sulfate-freeze–thaw environment , 2021, Journal of Materials Research and Technology.

[16]  G. Kaplan,et al.  The impact of RCA and fly ash on the mechanical and durability properties of polypropylene fibre-reinforced concrete exposed to freeze-thaw cycles and MgSO4 with ANN modeling , 2021, Construction and Building Materials.

[17]  C. Jaturapitakkul,et al.  Strength, chloride resistance, and water permeability of high volume sugarcane bagasse ash high strength concrete incorporating limestone powder , 2021, Construction and Building Materials.

[18]  L. Cui,et al.  Effect of curing temperature on time-dependent shear behavior and properties of polypropylene fiber-reinforced cemented paste backfill , 2021, Construction and Building Materials.

[19]  Jinliang Liu,et al.  Predicting the chloride diffusion in concrete incorporating fly ash by a multi-scale model , 2021, Journal of Cleaner Production.

[20]  W. Pei,et al.  Influence of nano-silica on the performances of concrete under the negative-temperature curing condition , 2021 .

[21]  O. Bayraktar,et al.  Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw , 2021 .

[22]  K. T. Tong,et al.  Mechanical and durability properties of alkali-activated fly ash concrete with increasing slag content , 2021 .

[23]  Z. Shui,et al.  Development of a novel eco-efficient LC2 conceptual cement based ultra-high performance concrete (UHPC) incorporating limestone powder and calcined clay tailings: Design and performances , 2021 .

[24]  Cheng-Hwa Liu,et al.  Effect of curing temperature on hydration, microstructure and ionic diffusivity of fly ash blended cement paste: A modelling study , 2021 .

[25]  O. Bayraktar,et al.  Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze–thaw cycles , 2021, Construction and Building Materials.

[26]  K. Kawai,et al.  Contribution of fly ash to the strength development of mortars cured at different temperatures , 2021 .

[27]  D. Mostofinejad,et al.  Evaluating durability parameters of concrete containing limestone powder and slag under bacterial remediation , 2021 .

[28]  Xiao-Yong Wang.  Optimal mix design of low-CO2 blended concrete with limestone powder , 2020 .

[29]  Jinling Gao,et al.  Prediction for temperature evolution and compressive strength of non-mass concrete with thermal insulation curing in cold weather , 2020 .

[30]  Chenzhi Li.  Mechanical and transport properties of recycled aggregate concrete modified with limestone powder , 2020 .

[31]  Linhua Jiang,et al.  Utilization of limestone powder as an activator for early-age strength improvement of slag concrete , 2020 .

[32]  Linhua Jiang,et al.  Influence of curing temperature on the mechanical properties and microstructure of limestone powder mass concrete , 2020, Structural Concrete.

[33]  S. M. Moshtaghioun,et al.  Use of bacteria for repairing cracks and improving properties of concrete containing limestone powder and natural zeolite , 2020 .

[34]  Linhua Jiang,et al.  Effect of limestone powder addition on threshold chloride concentration for steel corrosion in reinforced concrete , 2020 .

[35]  K. Kawai,et al.  Effects of Shirasu natural pozzolan and limestone powder on the strength and aggressive chemical resistance of concrete , 2020 .

[36]  Zhenguo Shi,et al.  A review on effects of limestone powder on the properties of concrete , 2018, Construction and Building Materials.

[37]  Jianwei Sun,et al.  Influences of limestone powder on the resistance of concretes to the chloride ion penetration and sulfate attack , 2018, Powder Technology.

[38]  K. Turk,et al.  Influence of Silica Fume and Class F Fly Ash on Mechanical and Rheological Properties and Freeze-Thaw Durability of Self-Compacting Mortars , 2018, Journal of Cold Regions Engineering.

[39]  Yongqiang Yu,et al.  Effect of elevated curing temperature on ceramsite concrete performance , 2017 .

[40]  Sanghwa Jung,et al.  Effects of the fineness of limestone powder and cement on the hydration and strength development of PLC concrete , 2017 .

[41]  Qiang Wang,et al.  Properties of high-volume limestone powder concrete under standard curing and steam-curing conditions , 2016 .

[42]  C. Poon,et al.  Heat of hydration of Portland high-calcium fly ash cement incorporating limestone powder : effect of limestone particle size , 2014 .

[43]  B. Lothenbach,et al.  Effect of temperature on the hydration of Portland cement blended with siliceous fly ash , 2013 .

[44]  Cheng Xin,et al.  Effects of slag and limestone powder on the hydration and hardening process of alite-barium calcium sulphoaluminate cement , 2012 .

[45]  A. Nonat,et al.  Influence of temperature on the hydration products of low pH cements , 2012 .

[46]  Kefei Li,et al.  Pore structure characterization of cement pastes blended with high-volume fly-ash , 2012 .

[47]  Toyoharu Nawa,et al.  Effect of fly ash on the kinetics of Portland cement hydration at different curing temperatures , 2011 .

[48]  Frank Winnefeld,et al.  Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes , 2007 .

[49]  V. Penttala,et al.  Stress and strain state of concrete during freezing and thawing cycles , 2002 .

[50]  K. Scrivener,et al.  Effects of an early or a late heat treatment on the microstructure and composition of inner C-S-H products of Portland cement mortars , 2002 .

[51]  Venčeslav Kaučič,et al.  The effects of limestone addition, clinker type and fineness on properties of Portland cement , 2001 .

[52]  S. Hanehara,et al.  Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste , 2001 .

[53]  Mohamed Heikal,et al.  Limestone-filled pozzolanic cement , 2000 .

[54]  Glykeria Kakali,et al.  Hydration products of C3A, C3S and Portland cement in the presence of CaCO3 , 2000 .

[55]  John H. Sharp,et al.  Effect of temperature on the hydration of the main clinker phases in portland cements: part ii, blended cements , 1998 .

[56]  Rachel J. Detwiler,et al.  Reaction kinetics of portland cement mortars hydrated at different temperatures , 1992 .

[57]  A. Bentur,et al.  Structural Properties of Calcium Silicate Pastes: II, Effect of Curing Temperature , 1979 .

[58]  T. Powers.  A Working Hypothesis for Further Studies of Frost Resistance of Concrete , 1945 .