Manufacture of a combined primary and tertiary mirror for the Large Synoptic Survey Telescope

The Large Synoptic Survey Telescope uses a unique optomechanical design that places the primary and tertiary mirrors on a single glass substrate. The honeycomb sandwich mirror blank was formed in March 2008 by spin-casting. The surface is currently a paraboloid with a 9.9 m focal length matching the primary. The deeper curve of the tertiary mirror will be produced when the surfaces are generated. Both mirrors will be lapped and polished using stressed laps and other tools on an 8.4 m polishing machine. The highly aspheric primary mirror will be measured through a refractive null lens, and a computer-generated hologram will be used to validate the null lens. The tertiary mirror will be measured through a diffractive null corrector, also validated with a separate hologram. The holograms for the two tests provide alignment references that will be used to make the axes of the two surfaces coincide.

[1]  James H. Burge,et al.  Fabrication of mirrors for the Magellan Telescopes and the Large Binocular Telescope , 2003, SPIE Astronomical Telescopes + Instrumentation.

[2]  James H. Burge.  Certification of null correctors for primary mirrors , 1994, Optics & Photonics.

[3]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[4]  Donald W. Sweeney,et al.  Overview of the Large Synoptic Survey Telescope project , 2006, SPIE Astronomical Telescopes + Instrumentation.

[5]  Casting 6.5-meter mirrors for the MMT conversion and Magellan , 1994, Astronomical Telescopes and Instrumentation.

[6]  Ping Zhou,et al.  Optimal design of computer-generated holograms to minimize sensitivity to fabrication errors. , 2007, Optics express.

[7]  S. Warner,et al.  Manufacture of the second 8.4 m primary mirror for the Large Binocular Telescope , 2006, SPIE Astronomical Telescopes + Instrumentation.

[8]  James H. Burge,et al.  Development of surface metrology for the Giant Magellan Telescope primary mirror , 2008, Astronomical Telescopes + Instrumentation.