Flow over a realistic car model: Wall modeled large eddy simulations assessment and unsteady effects

Abstract Numerical simulations are carried out on the flow over a realistic generic car geometry, the DrivAer-fastback car model. Pure large eddy simulations (LES) and wall-modeled large eddy simulations (WMLES) are used and compared to numerical and experimental results to assess the validity of these approaches when solving the flow field around complex automotive geometries. Results show a 70% CPU time reduction when using the wall model. Drag coefficient results show the influence of the wall model on coarser meshes is positive, reducing the difference on those obtained using finer meshes. Pressure profiles exhibit mixed results. The wall model used works well in adverse pressure gradients and smooth geometry changes. Results worsen in sections where the flow detaches and experiences large pressure drops. Flow structures and unsteady effects around the car are also analyzed, obtaining several characteristic frequencies for the different flow structures encountered. It should be noted that the present investigation shows how WMLES helps to reduce the computing cost and response vs pure LES, while providing high-quality unsteady data, although computational cost remains high. Results show potential in the introduction of this tool as a competitive simulation strategy for complex geometries.

[1]  Mesbah Uddin,et al.  Simulating DrivAer with Structured Finite Difference Overset Grids , 2015 .

[2]  Ben Thornber,et al.  A detailed statistical study of unsteady wake dynamics from automotive bluff bodies , 2017 .

[3]  A. Oliva,et al.  Low-frequency unsteadiness in the vortex formation region of a circular cylinder , 2013 .

[4]  Christian Oliver Paschereit,et al.  Experimental Comparison of the Aerodynamic Behavior of Fastback and Notchback DrivAer Models , 2014 .

[5]  O. Cadot,et al.  On multistabilities of real car's wake , 2017 .

[6]  L. Parras,et al.  Experimental study on Ahmed's body drag coefficient for different yaw angles , 2016 .

[7]  P. Moin,et al.  Eddies, streams, and convergence zones in turbulent flows , 1988 .

[8]  Christian Oliver Paschereit,et al.  Experimental Study of Baseline Flow Characteristics for the Realistic Car Model DrivAer , 2013 .

[9]  Gianluca Iaccarino,et al.  Aerodynamic flow around a sport utility vehicle—Computational and experimental investigation , 2012 .

[10]  Parviz Moin,et al.  An improved dynamic non-equilibrium wall-model for large eddy simulation , 2013 .

[11]  F. Xavier Trias,et al.  Conservation Properties of Unstructured Finite-Volume Mesh Schemes for the Navier-Stokes Equations , 2014 .

[12]  Emmanuel Guilmineau.  Numerical Simulations of Flow around a Realistic Generic Car Model , 2014 .

[13]  Soshi Kawai,et al.  Dynamic non-equilibrium wall-modeling for large eddy simulation at high Reynolds numbers , 2013 .

[14]  David Sims-Williams,et al.  Wind tunnel model support strut interference , 2004 .

[15]  U. Piomelli.  Wall-layer models for large-eddy simulations , 2008 .

[16]  David Sims-Williams,et al.  Support Strut Interference Effects on Passenger and Racing Car Wind Tunnel Models , 2006 .

[17]  Aniruddha Joshi,et al.  Numerical Investigations of the DrivAer Car Model using Opensource CFD Solver OpenFOAM , 2013 .

[18]  Albert R. George,et al.  Experimental Study of a Ground Vehicle Body Unsteady Near Wake , 1999 .

[19]  George Karypis,et al.  Multilevel k-way Partitioning Scheme for Irregular Graphs , 1998, J. Parallel Distributed Comput..

[20]  Alistair Revell,et al.  Assessment of RANS and DES methods for realistic automotive models , 2016 .

[21]  C. Meneveau,et al.  Integral wall model for large eddy simulations of wall-bounded turbulent flows , 2015 .

[22]  A. Oliva,et al.  Direct numerical simulation of a NACA0012 in full stall , 2013 .

[23]  Martin Geier,et al.  Simulation of external aerodynamics of the DrivAer model with the LBM on GPGPUs , 2015, PARCO.

[24]  F. Nicoud,et al.  Using singular values to build a subgrid-scale model for large eddy simulations , 2011 .

[25]  E. Guilmineau.  Numerical Simulations of Ground Simulation for a Realistic Generic Car Model , 2014 .

[26]  U. Piomelli,et al.  Wall-layer models for large-eddy simulations , 2008 .

[27]  Nikolaus A. Adams,et al.  Introduction of a New Realistic Generic Car Model for Aerodynamic Investigations , 2012 .

[28]  Oriol Lehmkuhl Barba,et al.  On the IBM approximation for the wheel aerodynamic simulation , 2014 .

[29]  Nikolaus A. Adams,et al.  Implicit Large-Eddy Simulation: Theory and Application , 2009 .

[30]  Oriol Lehmkuhl,et al.  Unsteady forces on a circular cylinder at critical Reynolds numbers , 2014 .

[31]  Bodo Ruck,et al.  Full scale experiments on vehicle induced transient pressure loads on roadside walls , 2017 .

[32]  Oriol Lehmkuhl,et al.  Influence of rotation on the flow over a cylinder at Re = 5000 , 2015 .

[33]  Geoffrey M. Le Good,et al.  On the Use of Reference Models in Automotive Aerodynamics , 2004 .

[34]  Oriol Lehmkuhl,et al.  Flow and turbulent structures around simplified car models , 2014 .

[35]  Thomas Schütz,et al.  Rear-End Shape Influence on the Aerodynamic Properties of a Realistic Car Model: A RANS and Hybrid LES/RANS Study , 2016 .

[36]  P. Spalart.  Detached-Eddy Simulation , 2009 .

[37]  Gunther Ramm,et al.  Some salient features of the time - averaged ground vehicle wake , 1984 .

[38]  S. Orszag,et al.  Extended Boltzmann Kinetic Equation for Turbulent Flows , 2003, Science.

[39]  F. Xavier Trias,et al.  Symmetry-preserving discretization of Navier-Stokes equations on collocated unstructured grids , 2014, J. Comput. Phys..

[40]  Johan Larsson,et al.  Large eddy simulation with modeled wall-stress: recent progress and future directions , 2016 .

[41]  H. Werner,et al.  Large-Eddy Simulation of Turbulent Flow Over and Around a Cube in a Plate Channel , 1993 .

[42]  Carlos David Pérez Segarra,et al.  Direct Numerical Simulation of the flow over a sphere at Re = 3700 , 2009 .