The phase distribution of gas-liquid two-phase flow in microimpacting T-junctions with different branch channel diameters

Abstract An experimental investigation was conducted to study the effect of branch channel diameters on phase distribution behaviors of the two-phase flow in horizontal microimpacting T-junctions. The cross-section of the inlet channel was 1000 μm × 500 μm and the cross-sections of the branch channels were 400 μm × 500 μm, 600 μm × 500 μm, 800 μm × 500 μm, respectively. Nitrogen and pure water at 120 kPa (abs) and 25 °C were selected as the working fluids. A high speed recording camera was used to clarify the fluid dynamics of the gas–liquid two-phase flow in the test section. Combining above experimental results with the visualization data, the force mechanism of gas–liquid two-phase flow in microimpacting T-junction was analyzed. For the better application of microimpacting T-junctions, the separation efficiency was introduced to evaluate the separation effect. It was found that the uniformity of the phase distribution can be well improved with the decrease of the branch channel diameters. The influencing degree (I) on slug-annular flow was larger than that on slug flow and annular flow. Furthermore, the influencing degree (I) decreased as the superficial velocities of two phases increased when inlet was slug flow or annular flow.

[1]  Masaru Noda,et al.  CFD-based optimal design of manifold in plate-fin microdevices , 2004 .

[2]  Howard A Stone,et al.  The role of feedback in microfluidic flow-focusing devices , 2008, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[3]  Critical lengths for the transition of bubble breakup in microfluidic T-junctions , 2014 .

[4]  Barry J. Azzopardi,et al.  Controlling the phase separation of gas–liquid flows at horizontal T-junctions , 2007 .

[5]  J. Aubin,et al.  Hydrodynamics and Mass Transfer in Gas‐Liquid Flows in Microreactors , 2012 .

[6]  Huaizhi Li,et al.  Asymmetrical breakup of bubbles at a microfluidic T-junction divergence: feedback effect of bubble collision , 2012 .

[7]  P. Woias,et al.  Multiphase minireactor system for direct fluorination of ethylene carbonate , 2012 .

[8]  Jinfang Chen,et al.  Phase split of nitrogen/non-Newtonian fluid two-phase flow at a micro-T-junction , 2011 .

[9]  Kui He,et al.  The effect of surface tension on phase distribution of two-phase flow in a micro-T-junction , 2011 .

[10]  H. M. Soliman,et al.  Experimental investigation of two-phase flow splitting in an equal-sided impacting tee junction with inclined outlets , 2011 .

[11]  Moo Hwan Kim,et al.  Adiabatic two-phase flow in rectangular microchannels with different aspect ratios: Part II – bubble behaviors and pressure drop in single bubble , 2010 .

[12]  Richard T. Lahey,et al.  The analysis of phase separation phenomena in branching conduits , 1983 .

[13]  David N. Adamson,et al.  Production of arrays of chemically distinct nanolitre plugs via repeated splitting in microfluidic devices. , 2006, Lab on a chip.

[14]  M. Kim,et al.  Adiabatic two-phase flow in rectangular microchannels with different aspect ratios: Part I – Flow pattern, pressure drop and void fraction , 2011 .

[15]  Peng Zhang,et al.  Evolution of flow patterns and the associated heat and mass transfer characteristics during flow boiling in mini-/micro-channels , 2016 .

[16]  Sang Yong Lee,et al.  Split of two-phase plug flow with elongated bubbles at a microscale branching T-junction , 2015 .

[17]  Predrag Stojan Hrnjak,et al.  Characterization of Two -Phase Flow in Microchannels , 2002 .

[18]  Jing Zhang,et al.  Experimental study on two-phase separation performance of impacting T-junction , 2016 .

[19]  George M Whitesides,et al.  The pressure drop along rectangular microchannels containing bubbles. , 2007, Lab on a chip.

[20]  N. Verma,et al.  Microchannel-embedded metal–carbon–polymer nanocomposite as a novel support for chitosan for efficient removal of hexavalent chromium from water under dynamic conditions , 2016 .

[21]  Kui He,et al.  The effect of flow pattern on split of two-phase flow through a micro-T-junction , 2011 .

[22]  Christopher L. Hagen,et al.  Design, simulation, and testing of a novel micro-channel heat exchanger for natural gas cooling in automotive applications , 2017 .

[23]  Jinfang Chen,et al.  Experimental investigation of two-phase slug flow splitting at a micro impacting T-junction , 2015 .

[24]  A. deMello,et al.  The past, present and potential for microfluidic reactor technology in chemical synthesis. , 2013, Nature chemistry.

[25]  Annular two-phase flow split at an impacting T , 1987 .

[26]  M. A. Mohamed,et al.  Conditions for complete phase separation in an impacting tee junction at various inclinations of the outlet arms , 2012 .

[27]  L. Portela,et al.  Design and characterization of bubble-splitting distributor for scaled-out multiphase microreactors , 2014 .

[28]  H. M. Soliman,et al.  Two-phase flow in a horizontal equal-sided impacting tee junction , 2007 .

[29]  Guangwen Chen,et al.  Numerical simulation of Taylor bubble formation in a microchannel with a converging shape mixing junction , 2015 .

[30]  Huaizhi Li,et al.  Scaling of the bubble formation in a flow-focusing device: Role of the liquid viscosity , 2014 .

[31]  A. Kawahara,et al.  Investigation of two-phase flow pattern, void fraction and pressure drop in a microchannel , 2002 .

[32]  A. Elazhary,et al.  Two-phase flow in a horizontal mini-size impacting T-junction with a rectangular cross-section , 2012 .

[33]  Liu Qi,et al.  Gas-liquid two-phase flow division at a micro-T-junction , 2010 .

[34]  Armand Ajdari,et al.  Microfluidic bypass for efficient passive regulation of droplet traffic at a junction , 2006 .

[35]  B. J. Azzopardi,et al.  The effect of flow patterns on two-phase flow in a T junction , 1982 .

[36]  K. Jensen,et al.  Scaled-Out Multilayer Gas−Liquid Microreactor with Integrated Velocimetry Sensors , 2005 .

[37]  D. Weitz,et al.  Geometrically mediated breakup of drops in microfluidic devices. , 2003, Physical review letters.

[38]  Patrick Tabeling,et al.  Droplet breakup in microfluidic junctions of arbitrary angles. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[39]  S. Hsieh,et al.  Liquid flow in a micro-channel , 2006 .

[40]  D. Beebe,et al.  Controlled microfluidic interfaces , 2005, Nature.

[41]  Huaizhi Li,et al.  Dynamics of bubble breakup in a microfluidic T-junction divergence , 2011 .

[42]  Barry J. Azzopardi,et al.  Plant Application of a T-Junction as a Partial Phase Separator , 2002 .

[43]  Shuangfeng Wang,et al.  Experimental investigation of annular two-phase flow splitting at a microimpacting T-junction , 2014 .

[44]  Christian Holtze,et al.  High throughput production of single core double emulsions in a parallelized microfluidic device. , 2012, Lab on a chip.

[45]  Kjell H. Bendiksen,et al.  An experimental investigation of the motion of long bubbles in inclined tubes , 1984 .

[46]  Guangwen Chen,et al.  Pressure drops of single and two-phase flows through T-type microchannel mixers , 2004 .

[47]  Masahiro Kawaji,et al.  The effect of channel diameter on adiabatic two-phase flow characteristics in microchannels ☆ , 2004 .

[48]  S. Anna,et al.  Coalescence and splitting of confined droplets at microfluidic junctions. , 2009, Lab on a chip.

[49]  Barry J. Azzopardi,et al.  The Phase Separation Capabilities of Two T-Junctions Placed in Series , 2004 .

[50]  A. Abate,et al.  Block-and-break generation of microdroplets with fixed volume. , 2013, Biomicrofluidics.

[51]  Jinfang Chen,et al.  Gas–liquid two-phase flow splitting at microchannel junctions with different branch angles , 2013 .

[52]  Albert Mosyak,et al.  Heat transfer of gas–liquid mixture in micro-channel heat sink , 2009 .

[53]  Issam Mudawar,et al.  Thermal and thermodynamic performance, and pressure oscillations of refrigeration loop employing large micro-channel evaporators , 2016 .