Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing

Abstract Limited material options, prohibitively expensive equipment, and high production costs currently limit the ability of small and medium enterprises to use 3D printing to prototype and manufacture metallic goods. A low-cost open-source 3D metal printer that utilizes gas metal arc welding technology has been developed that could make metal printing accessible to the average consumer. Unfortunately, this technology would demand access to expensive cutting tools for part removal from the substrate. This article investigates several substrate treatments to provide a low-cost method to easily remove 3D-printed 1100 aluminum parts from a reusable substrate. Coatings of aluminum oxide and boron nitride on 1100 aluminum and A36 low-carbon steel substrates were tested. Lap shear tests were performed to assess the interlayer adhesion between the printed metal part and the print substrate. No warping of the substrate was observed during printing. It was determined that boron nitride-coated low-carbon steel pr...

[1]  T. Shih,et al.  Interaction of steel with pure Al, Al–7Si and A356 alloys , 2007 .

[2]  Li Lu,et al.  Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts , 2001 .

[3]  Yiwei Chen,et al.  Automated system for welding-based rapid prototyping , 2002 .

[4]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[5]  John Irwin,et al.  Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers , 2013, Mechatronics.

[6]  Yoshiharu Mutoh,et al.  Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy , 2007 .

[7]  Joshua M. Pearce,et al.  A Low-Cost Open-Source Metal 3-D Printer , 2013, IEEE Access.

[8]  G. H. Botham,et al.  Iron in Aluminum Alloys , 1949 .

[9]  Kiyotaka Matsuura,et al.  Freeform fabrication of titanium metal and intermetallic alloys by three-dimensional micro welding , 2007 .

[10]  Sehyung Park,et al.  3D welding and milling: part II—optimization of the 3D welding process using an experimental design approach , 2005 .

[11]  Radovan Kovacevic,et al.  Rapid prototyping of 4043 Al-alloy parts by VP-GTAW , 2004 .

[12]  F. Barbier,et al.  Intermetallic compound layer growth between solid iron and molten aluminium , 1998 .

[13]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[14]  Hod Lipson,et al.  Fabricated: The New World of 3D Printing , 2013 .

[15]  A. Amis,et al.  Rapid prototyping techniques for anatomical modelling in medicine. , 1997, Annals of the Royal College of Surgeons of England.

[16]  T. Yakou,et al.  Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment , 2002 .

[17]  Lin Wu,et al.  A 3D dynamic analysis of thermal behavior during single-pass multi-layer weld-based rapid prototyping , 2011 .

[18]  Doo-Sun Choi,et al.  3D welding and milling: Part I-a direct approach for freeform fabrication of metallic prototypes , 2005 .

[19]  Joshua M. Pearce.  The case for open source appropriate technology , 2012, Environment, Development and Sustainability.

[20]  Joshua M. Pearce,et al.  3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development , 2010, Journal of Sustainable Development.

[21]  A. Mekhrabov,et al.  The role of Si addition on the interfacial interaction in FeAl diffusion layer , 1994 .

[22]  Priti Wanjara,et al.  Electron beam freeforming of stainless steel using solid wire feed , 2007 .

[23]  K. P. Karunakaran,et al.  Hybrid adaptive layer manufacturing: An Intelligent art of direct metal rapid tooling process , 2006 .

[24]  Joshua M. Pearce,et al.  Environmental Life Cycle Analysis of Distributed Three-Dimensional Printing and Conventional Manufacturing of Polymer Products , 2013 .

[25]  Rhys Jones,et al.  RepRap – the replicating rapid prototyper , 2011, Robotica.

[26]  Neil Gershenfeld,et al.  FAB: The Coming Revolution on Your Desktop--from Personal Computers to Personal Fabrication , 2005 .

[27]  Soshu Kirihara,et al.  Freeform fabrication of superalloy objects by 3D micro welding , 2009 .