Comprehensive optimization for energy loss reduction in distribution networks

An efficient method for capacitor placement and network reconfiguration is presented in this paper to reduce energy loss in distribution networks over intervals of time. The concept of system state characterization and its relevant algorithm are introduced in order to develop a general, analytical method for solving network reconfiguration and capacitor placement problems and determining the conditions for energy loss minimization. Consequently, the computational effort required in solving such large-scale dynamic optimization problems is decreased greatly by converting the original problems into some simpler static optimization problems with appropriate linearization and stepwise correction idea. Based on sensitivity analysis, loop-analysis and superimpose theorem, the problem formulations are set in a realistic and robust framework so that the method is applicable to various electrical networks with complete or incomplete measurement allocations. A case study of IEEE 33-bus system demonstrates the rationality and validity of strategies proposed in this paper, and the results illustrate that this approach has a substantial reduction in computational expense while maintaining a high level of accuracy.

[1]  S. K. Basu,et al.  A new algorithm for the reconfiguration of distribution feeders for loss minimization , 1992 .

[2]  O.M. Mikic,et al.  Variance-Based Energy Loss Computation in Low Voltage Distribution Networks , 2007, IEEE Transactions on Power Systems.

[3]  M. E. Baran,et al.  Optimal capacitor placement on radial distribution systems , 1989 .

[4]  Lin Yang,et al.  System State Characterization and Application to Technical Energy Loss Computation , 2007, 2007 IEEE Power Engineering Society General Meeting.

[5]  S. Granville Optimal reactive dispatch through interior point methods , 1994 .

[6]  M. E. Hamedani Golshan,et al.  Distributed generation, reactive sources and network-configuration planning for power and energy-loss reduction , 2006 .

[7]  L. Roa,et al.  Optimal Capacitor Location for Radial Systems using Genetic Algorithms , 2006, 2006 IEEE/PES Transmission & Distribution Conference and Exposition: Latin America.

[8]  D. Rajicic,et al.  Energy summation method for energy loss computation in radial distribution networks , 1996 .

[9]  Roy E. Marsten,et al.  The interior-point method for linear programming , 1992, IEEE Software.

[10]  S. Carneiro,et al.  A New Distribution System Reconfiguration Approach Using Optimum Power Flow and Sensitivity Analysis for Loss Reduction , 2006, IEEE Transactions on Power Systems.

[11]  M. Delimar,et al.  Forecasting data for load flow , 2004, Proceedings of the 12th IEEE Mediterranean Electrotechnical Conference (IEEE Cat. No.04CH37521).

[12]  A. L. Shenkman,et al.  Energy loss computation by using statistical techniques , 1990 .

[13]  Zhao Da-pu STUDY ON THE ALGORITHM FOR DYNAMIC REACTIVE POWER OPTIMIZATION OF DISTRIBUTION SYSTEMS , 2003 .

[14]  Yin Xianggen,et al.  The algorithm of probabilistic load flow retaining nonlinearity , 2002, Proceedings. International Conference on Power System Technology.

[15]  Ruben Romero,et al.  Optimal Capacitor Placement in Radial Distribution Networks , 2001 .

[16]  J. Grainger,et al.  Optimum Size and Location of Shunt Capacitors for Reduction of Losses on Distribution Feeders , 1981, IEEE Transactions on Power Apparatus and Systems.

[17]  J.W. Fourie,et al.  A statistical method to minimize electrical energy losses in a local electricity distribution network , 2004, 2004 IEEE Africon. 7th Africon Conference in Africa (IEEE Cat. No.04CH37590).

[18]  Zhang Boming A QUASI-GLOBAL OPTIMAL METHOD FOR REAL-TIME NETWORK RECONFIGURATION OF DISTRIBUTION SYSTEM , 2003 .

[19]  R. Taleski,et al.  Distribution network reconfiguration for energy loss reduction , 1997 .

[20]  Y.-Y. Hsu,et al.  Dispatch of capacitors on distribution system using dynamic programming , 1993 .

[21]  H. E. Shaalan,et al.  Time varying load analysis to reduce distribution losses through reconfiguration , 1993 .

[22]  R. Romero,et al.  Optimal Capacitor Placement in Radial Distribution Networks , 2001, IEEE Power Engineering Review.

[23]  D. Sprock,et al.  Predictive discrete time control of switch-mode applications , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[24]  J. Aguado,et al.  Cumulant-based probabilistic optimal power flow (P-OPF) with Gaussian and gamma distributions , 2005, IEEE Transactions on Power Systems.

[25]  E. Gonzalez-Romera,et al.  Monthly Electric Energy Demand Forecasting Based on Trend Extraction , 2006, IEEE Transactions on Power Systems.

[26]  A.H. Mantawy,et al.  A new reactive power optimization algorithm , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.