Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

[1]  D. Rosa,et al.  Surface composition and morphology of poly(3-hydroxybutyrate) exposed to biodegradation , 2008 .

[2]  M. Salvalaggio,et al.  Multi-component analysis of low-density polyethylene oxidative degradation , 2006 .

[3]  D. Rosa,et al.  Biodegradation and the dynamic mechanical properties of starch gelatinization in poly(ε-caprolactone)/corn starch blends , 2006 .

[4]  S. Canevarolo,et al.  Evaluation of Philips and Ziegler–Natta high-density polyethylene degradation during processing in an internal mixer using the chain scission and branching distribution function analysis , 2006 .

[5]  J. A. Lima,et al.  Poly(hydroxybutyrate) and epichlorohydrin elastomers blends: Phase behavior and morphology , 2006 .

[6]  R. Shanks,et al.  Multiple melting behaviour of poly(3-hydroxybutyrate-co-hydroxyvalerate) using step-scan DSC , 2005 .

[7]  Toshihisa Tanaka,et al.  Uniaxial drawing of poly[(R)-3-hydroxybutyrate]/cellulose acetate butyrate blends and their orientation behavior. , 2005, Macromolecular bioscience.

[8]  A. Santamaría,et al.  Basic and applied rheology of m-LLDPE/LDPE blends: Miscibility and processing features , 2005 .

[9]  Y. Ozaki,et al.  Structure, Dispersibility, and Crystallinity of Poly(hydroxybutyrate)/Poly(l-lactic acid) Blends Studied by FT-IR Microspectroscopy and Differential Scanning Calorimetry , 2005 .

[10]  R. Singh,et al.  An overview on the degradability of polymer nanocomposites , 2005 .

[11]  H. Kammer,et al.  Melt reaction in blends of poly(3‐hydroxybutyrate) (PHB) and epoxidized natural rubber (ENR‐50) , 2005 .

[12]  H. A. El-Rehim,et al.  Synergistic effect of combining UV-sunlight–soil burial treatment on the biodegradation rate of LDPE/starch blends , 2004 .

[13]  A. G. Pedroso,et al.  Evaluation of the thermal and mechanical properties of poly(ε-caprolactone), low-density polyethylene, and their blends , 2004 .

[14]  D. Rosa,et al.  The use of roughness for evaluating the biodegradation of poly-β-(hydroxybutyrate) and poly-β-(hydroxybutyrate-co-β- valerate) , 2004 .

[15]  T. Nishi,et al.  Miscibility and crystallization behaviour of biodegradable blends of two aliphatic polyesters. Poly(3-hydroxybutyrate-co-hydroxyvalerate) and poly(butylene succinate) blends , 2003 .

[16]  H. Tsuji,et al.  Environmental degradation of biodegradable polyesters. IV. The effects of pores and surface hydrophilicity on the biodegradation of poly(ϵ-caprolactone) and poly[(R)-3-hydroxybutyrate] films in controlled seawater , 2003 .

[17]  D. Rosa,et al.  Effect of thermal aging on the biodegradation of PCL, PHB-V, and their blends with starch in soil compost , 2003 .

[18]  Z. Cai,et al.  Crystallization behavior, mechanical properties, and environmental biodegradability of poly(β-hydroxybutyrate)/cellulose acetate butyrate blends , 2003 .

[19]  P. Degée,et al.  Biodegradation of poly(epsilon-caprolactone)/starch blends and composites in composting and culture environments: the effect of compatibilization on the inherent biodegradability of the host polymer. , 2003, Carbohydrate research.

[20]  Trong-Ming Don,et al.  Spherulitic morphology and crystallization kinetics of melt-miscible blends of poly(3-hydroxybutyrate) with low molecular weight poly(ethylene oxide) , 2003 .

[21]  I. Hussein,et al.  Miscibility of hexene-LLDPE and LDPE blends: influence of branch content and composition distribution , 2003 .

[22]  T. Nishi,et al.  Poly(hydroxybutyrate)/poly(butylene succinate) blends: miscibility and nonisothermal crystallization , 2003 .

[23]  D. Rosa,et al.  The biodegradation of poly-β-(hydroxybutyrate), poly-β-(hydroxybutyrate-co-β-valerate) and poly(ε-caprolactone) in compost derived from municipal solid waste , 2003 .

[24]  M. L. Focarete,et al.  Miscibility and Mechanical Properties of Blends of (l)-Lactide Copolymers with Atactic Poly(3-hydroxybutyrate) , 2002 .

[25]  E. Shafee.  Dielectric relaxation study of atactic poly(epichlorohydrin)/poly(3-hydroxybutyrate) blends , 2002 .

[26]  Z. Fan,et al.  A molecular dynamics study of the effects of branching characteristics of LDPE on its miscibility with HDPE , 2002 .

[27]  S. Fahmy,et al.  Miscibility, crystallization and phase structure of poly(3-hydroxybutyrate)/cellulose acetate butyrate blends , 2001 .

[28]  S. V. Vlasov,et al.  MORPHOLOGICALLY SPECIAL FEATURES OF POLY(3-HYDROXYBUTYRATE)/LOW-DENSITY POLYETHYLENE BLENDS , 2000 .

[29]  D. Rosa,et al.  A study of parameters interfering in oxidative induction time (OIT) results obtained by differential scanning calorimetry in polyolefin , 2000 .

[30]  貞治 浦上,et al.  生分解性プラスチックス-ポリ-β-ヒドロキシ酪酸/ポリカプロラクトンブレンドポリマーの開発 , 2000 .

[31]  I. Chin,et al.  Toughening of poly(3-hydroxybutyrate) with poly(cis-1,4-isoprene) , 1999 .

[32]  R. Marchessault,et al.  Miscibility and tensile properties of poly (β-hydroxybutyrate)–cellulose propionate blends , 1999 .

[33]  D. Weisleder,et al.  Biodegradation of Injection Molded Starch-Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Blends in a Natural Compost Environment , 1998 .

[34]  P. Starck.  Dynamic mechanical thermal analysis on Ziegler-Natta and metallocene type ethylene copolymers , 1997 .

[35]  H. Abe,et al.  Molecular mass of poly[(R )-3-hydroxybutyric acid] produced in a recombinant Escherichia coli , 1997, Applied Microbiology and Biotechnology.

[36]  M. Gealt,et al.  Biodegradation and Bioremediation. , 1996 .

[37]  E. Thomas,et al.  Effect of short‐chain branching on the morphology of LLDPE‐oriented thin films , 1988 .

[38]  Thomas Taylor,et al.  Dynamic mechanical relaxations in polyethylene , 1985 .

[39]  P. Barham,et al.  Crystallization and morphology of a bacterial thermoplastic: poly-3-hydroxybutyrate , 1984 .

[40]  Yong-Biao Yang,et al.  Molecular dynamics simulation studies of binary blend miscibility of poly(3-hydroxybutyrate) and poly(ethylene oxide) , 2004 .

[41]  G. Orsello,et al.  Biodegradation of poly-ε-caprolactone/poly-β-hydroxybutyrate blend , 2003 .

[42]  A. G. Pedroso,et al.  The influence of the drying process time on the final properties of recycled glass fiber reinforced polyamide 6 , 2002 .

[43]  Jin‐San Yoon,et al.  Compatibility of poly(3-hydroxybutyrate)/poly(ethylene-co-vinyl acetate) blends , 1998 .

[44]  S. Girois,et al.  Polym. Degrad. Stab. , 1996 .

[45]  N. Lotti,et al.  Biodegradability of blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with cellulose acetate esters in activated sludge , 1994 .