Mechanistic modelling of worn drill cutting forces with drill wear effect coefficients

Abstract When drilling difficult-to-cut materials with twist drills, drill wear frequently occurs with various types including flank wear, crater wear, chisel wear and outer corner wear. The previous research mainly focuses on flank wear. This study presents a mechanistic drilling force model of worn drill with the drill wear effect coefficients (DWECs) to describe the effect of different wear types on drilling forces. The DWECs under different drill wear types are calibrated and analyzed through a group of carefully designed experiments. It believes the proposed model together with the results are useful in drill wear detection.

[1]  Dinghua Zhang,et al.  Iterative Learning Method for Drilling Depth Optimization in Peck Deep-Hole Drilling , 2018, Journal of Manufacturing Science and Engineering.

[2]  Ranga Komanduri,et al.  Frequency and time domain analyses of sensor signals in drilling. I: Correlation with drill wear , 1995 .

[3]  Richard E. DeVor,et al.  A NEW MECHANISTIC MODEL FOR PREDICTING WORN TOOL CUTTING FORCES , 2001 .

[4]  Dinghua Zhang,et al.  Chip evacuation force modelling for deep hole drilling with twist drills , 2018, The International Journal of Advanced Manufacturing Technology.

[5]  Ming Luo,et al.  Milling Force Modeling of Worn Tool and Tool Flank Wear Recognition in End Milling , 2015, IEEE/ASME Transactions on Mechatronics.

[6]  S. Lin,et al.  TOOL WEAR MONITORING IN DRILLING USING FORCE SIGNALS , 1995 .

[7]  Aldo Attanasio,et al.  Tool Wear in Cutting Operations: Experimental Analysis and Analytical Models , 2013 .

[8]  Barry K. Fussell,et al.  Real-time tool wear monitoring in milling using a cutting condition independent method , 2015 .

[9]  Daniel J. Waldorf,et al.  A Simplified Model for Ploughing Forces in Turning , 2006 .

[10]  Cuneyt Oysu,et al.  Drill wear monitoring using cutting force signals , 2004 .

[11]  Issam Abu-Mahfouz,et al.  Drilling wear detection and classification using vibration signals and artificial neural network , 2003 .

[12]  Richard E. DeVor,et al.  A Chisel Edge Model for Arbitrary Drill Point Geometry , 2005 .

[13]  Y. S. Tarng,et al.  In-process prediction of corner wear in drilling operations , 2000 .

[14]  Jun Ni,et al.  Analysis of drill failure modes by multi-sensors on a robotic end effector , 1996 .