Point defects and grain boundary effects on tensile strength of 3C-SiC studied by molecular dynamics simulations

Abstract The tensile strength of irradiated 3C-SiC, SiC with artificial point defects, SiC with symmetric tilt grain boundaries (GBs), irradiated SiC with GBs are investigated using molecular dynamics simulations at 300 K. For an irradiated SiC sample, the tensile strength decreases with the increase of irradiation dose. The Young's modulus decreases with the increase of irradiation dose which agrees well with experiment and simulation data. For artificial point defects, the designed point defects dramatically decrease the tensile strength of SiC at low concentration. Among the point defects studied in this work, the vacancies drop the strength the most seriously. SiC symmetric tilt GBs decrease the tensile strength of pure SiC. Under irradiated condition, the tensile strengths of all SiC samples with grain boundaries decrease and converge to certain value because the structures become amorphous and the grain boundaries disappear after high dose irradiation.

[1]  Lance Lewis Snead,et al.  High-dose neutron irradiation of Hi-Nicalon Type S silicon carbide composites. Part 2: Mechanical and physical properties , 2015 .

[2]  Dane Morgan,et al.  Radiation interaction with tilt grain boundaries in β-SiC , 2012 .

[3]  A. Stukowski Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool , 2009 .

[4]  Derek H. Warner,et al.  Atomistic-based predictions of crack tip behavior in silicon carbide across a range of temperatures and strain rates , 2014 .

[5]  Enqiang Lin,et al.  Grain boundary effects on defect production and mechanical properties of irradiated nanocrystalline SiC , 2012 .

[6]  Laurent Capolungo,et al.  Modeling microstructural evolution in irradiated materials with cluster dynamics methods: A review , 2018, Computational Materials Science.

[7]  I. Szlufarska,et al.  Energetics and structure of ⟨0 0 1⟩ tilt grain boundaries in SiC , 2010 .

[8]  William J. Weber,et al.  Displacement threshold energies in β-SiC , 1998 .

[9]  Molecular dynamics simulation of irradiation damage of SiC/Gra/SiC composites , 2017 .

[10]  Kurt A. Terrani,et al.  Irradiation stability and thermo-mechanical properties of NITE-SiC irradiated to 10 dpa , 2018 .

[11]  Steven Shannon,et al.  Nanoscale engineering of radiation tolerant silicon carbide. , 2012, Physical chemistry chemical physics : PCCP.

[12]  Takashi Goto,et al.  Transparent highly oriented 3C-SiC bulks by halide laser CVD , 2018, Journal of the European Ceramic Society.

[13]  L. Snead,et al.  Mechanical‐ and Physical‐Property Changes of Neutron‐Irradiated Chemical‐Vapor‐Deposited Silicon Carbide , 1999 .

[14]  Keith A Runge,et al.  Grain boundary dynamics of SiC bicrystals under shear deformation , 2015 .

[15]  Blas P. Uberuaga,et al.  Efficient Annealing of Radiation Damage Near Grain Boundaries via Interstitial Emission , 2010, Science.

[16]  P. Erhart,et al.  Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide , 2005 .

[17]  The role of point defects in the swelling and elastic modulus of irradiated cubic silicon carbide , 2015 .

[18]  Yongsoo Kim,et al.  Molecular dynamics simulations of the coupled effects of strain and temperature on displacement cascades in α-zirconium , 2018, Nuclear Engineering and Technology.

[19]  Fei Gao,et al.  Atomic-scale simulations of cascade overlap and damage evolution in silicon carbide , 2003 .

[20]  Y. Katoh,et al.  Handbook of SiC properties for fuel performance modeling , 2007 .

[21]  L. V. Brutzel,et al.  Irradiation damage in nuclear graphite at the atomic scale , 2018, Carbon.

[22]  Yutai Katoh,et al.  Mechanical properties of SiC composites neutron irradiated under light water reactor relevant temperature and dose conditions , 2017 .

[23]  Laura Jamison,et al.  Evidence for cascade overlap and grain boundary enhanced amorphization in silicon carbide irradiated with Kr ions , 2015 .

[24]  Fei Gao,et al.  Cascade overlap and amorphization in 3C-SiC: Defect accumulation, topological features, and disordering , 2002 .

[25]  Andrew A. Petersen,et al.  High-temperature annealing of graphite: A molecular dynamics study , 2018 .

[26]  Marco Mauceri,et al.  From thin film to bulk 3C-SiC growth: Understanding the mechanism of defects reduction , 2018 .

[27]  Andrew M. Minor,et al.  Dislocation glide-controlled room-temperature plasticity in 6H-SiC single crystals , 2014 .

[28]  Narasimhan Swaminathan,et al.  Molecular Dynamics Simulation of Primary Damage in β-Li2TiO3 , 2018, Fusion Engineering and Design.

[29]  K. Xue,et al.  Understanding the changes in mechanical properties due to the crystalline-to-amorphization transition in SiC , 2009 .

[30]  Syo Matsumura,et al.  Structural relaxation of amorphous silicon carbide. , 2002, Physical review letters.

[31]  Lisa J. Porter,et al.  Atomistic modeling of finite-temperature properties of β-SiC. I. Lattice vibrations, heat capacity, and thermal expansion , 1997 .

[32]  L. Shao,et al.  Molecular dynamics simulation of damage cascade creation in SiC composites containing SiC/graphite interface , 2013 .

[33]  Daejong Kim,et al.  FABRICATION AND MATERIAL ISSUES FOR THE APPLICATION OF SiC COMPOSITES TO LWR FUEL CLADDING , 2013 .

[34]  Yutai Katoh,et al.  Mechanical property degradation of high crystalline SiC fiber–reinforced SiC matrix composite neutron irradiated to ∼100 displacements per atom , 2017 .

[35]  Steve Plimpton,et al.  Fast parallel algorithms for short-range molecular dynamics , 1993 .

[36]  S. Yip,et al.  Atomistic modeling of finite-temperature properties of crystalline β-SiC: II. Thermal conductivity and effects of point defects , 1998 .

[37]  Katsumi Yoshida,et al.  Neutron Irradiation Swelling of SiC and SiCf/SiC for Advanced Nuclear Applications , 2015 .

[38]  Steven J. Zinkle,et al.  Amorphization of SiC under ion and neutron irradiation , 1998 .

[39]  Xichun Luo,et al.  Molecular dynamics simulation study of deformation mechanisms in 3C-SiC during nanometric cutting at elevated temperatures , 2016 .

[40]  Kurt A. Terrani,et al.  High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments , 2013 .

[41]  Sanjit Ghose,et al.  Reprint of: Microstructural evolution of neutron irradiated 3C-SiC , 2018 .

[42]  Eric J. Bylaska,et al.  Ab Initio and Empirical Potential Studies of Defect Properties in 3C-SiC , 2001 .

[43]  Lance Lewis Snead,et al.  High dose neutron irradiation of Hi-Nicalon Type S silicon carbide composites, Part 1: Microstructural evaluations , 2015 .

[44]  Kurt A. Terrani,et al.  Oxidation of fuel cladding candidate materials in steam environments at high temperature and pressure , 2012 .

[45]  Wei Xiao,et al.  Molecular dynamics simulation of C/Si ratio effect on the irradiation swelling of β-SiC , 2016 .

[46]  Normand Mousseau,et al.  Diffusion of point defects in crystalline silicon using the kinetic activation-relaxation technique method , 2015 .

[47]  Haixuan Xu,et al.  Self-Evolving Atomistic Kinetic Monte Carlo Simulations of Defects in Materials , 2015 .

[48]  Lance Lewis Snead,et al.  Observation and Possible Mechanism of Irradiation Induced Creep in Ceramics , 2013 .

[49]  Akihiko Hirata,et al.  Direct observations of thermally induced structural changes in amorphous silicon carbide , 2008 .

[50]  Noam Bernstein,et al.  Thermal effects in 10 keV Si PKA cascades in 3C-SiC , 2009 .

[51]  Hiroshi Ogawa,et al.  GBstudio: A Builder Software on Periodic Models of CSL Boundaries for Molecular Simulation , 2006 .

[52]  W. J. Weber,et al.  Radiation effects in SiC for nuclear structural applications , 2012 .

[53]  Yutai Katoh,et al.  Current status and recent research achievements in SiC/SiC composites , 2014 .

[54]  Wei Xiao,et al.  First principles study of the C/Si ratio effect on the ideal tensile strength of β-SiC , 2015 .

[55]  Fei Gao,et al.  Mechanical properties and elastic constants due to damage accumulation and amorphization in SiC , 2004 .