Failure analysis of 3D printed glass fiber/PA12 composite lattice structures using DIC

[1]  S. Arai,et al.  Effect of anisotropy in the build direction and laser-scanning conditions on characterization of short-glass-fiber-reinforced PBT for laser sintering , 2019, Optics & Laser Technology.

[2]  Rashid K. Abu Al-Rub,et al.  Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study , 2019, Materials & Design.

[3]  W. M. Verbeeten,et al.  Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing , 2019, Additive Manufacturing.

[4]  A. Yousefi,et al.  Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament , 2019, Results in Physics.

[5]  Anwarul Haque,et al.  Fracture toughness of additively manufactured carbon fiber reinforced composites , 2019, Additive Manufacturing.

[6]  Scott Fish,et al.  Development of an automated laser control system for improving temperature uniformity and controlling component strength in selective laser sintering , 2018, Additive Manufacturing.

[7]  K. Shea,et al.  Stepwise graded struts for maximizing energy absorption in lattices , 2018, Extreme Mechanics Letters.

[8]  Jesús Rodríguez,et al.  Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering , 2018, Engineering Fracture Mechanics.

[9]  Jun Xu,et al.  Compressive properties of hollow lattice truss reinforced honeycombs (Honeytubes) by additive manufacturing: Patterning and tube alignment effects , 2018, Materials & Design.

[10]  M. Nikzad,et al.  Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology , 2018, Materials & Design.

[11]  D. Drummer,et al.  Tribological anisotropy of selective laser sintered PA12 parts , 2018, Polymer Testing.

[12]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[13]  Fengwen Wang,et al.  Systematic design of 3D auxetic lattice materials with programmable Poisson’s ratio for finite strains , 2018 .

[14]  S. Arai,et al.  Effects of short-glass-fiber content on material and part properties of poly(butylene terephthalate) processed by selective laser sintering , 2018 .

[15]  Yuchuan Cheng,et al.  Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling , 2018 .

[16]  K. Zhou,et al.  Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering , 2018 .

[17]  Wenfeng Hao,et al.  Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites , 2018 .

[18]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[19]  Kah Fai Leong,et al.  Compressive properties of functionally graded lattice structures manufactured by selective laser melting , 2017 .

[20]  K. McDonnell,et al.  Fabrication of Continuous Carbon, Glass and Kevlar fibre reinforced polymer composites using Additive Manufacturing , 2017 .

[21]  Ivan Giorgio,et al.  Pantographic lattices with non-orthogonal fibres: Experiments and their numerical simulations , 2017 .

[22]  Liu Hongbo,et al.  Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder , 2017 .

[23]  R. Seltzer,et al.  Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature , 2014 .

[24]  Liang Hao,et al.  Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering , 2011 .

[25]  Javier Segurado,et al.  Effect of water conditioning on the fracture behavior of PA12 composites processed by selective laser sintering , 2011 .

[26]  Paul Sas,et al.  Microstructural characterization of SLS-PA12 specimens under dynamic tension/compression excitation , 2010 .

[27]  M. Ashby.  The properties of foams and lattices , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[28]  D. Drummer,et al.  Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties , 2019, Additive Manufacturing.

[29]  Guoying Dong,et al.  Mechanical properties of continuous Kevlar fiber reinforced composites fabricated by fused deposition modeling process , 2018 .