MIMO Terminal Performance Evaluation With a Novel Wireless Cable Method

Conventional conductive method, where antennas on the device under test (DUT) are disconnected from antenna ports and replaced with radio frequency (RF) coaxial cables, has been dominantly utilized in industry to evaluate multiple-input multiple-output capable terminals. However, direct RF cable connection introduces many practical problems and a radiated method to replace cable connection is highly desirable. Existing wireless cable method relies on the knowledge of a transfer matrix between the channel emulator (CE) output ports and DUT antenna ports, and also requires an anechoic chamber, which might be impractical and expensive. In this paper, a novel wireless cable method is proposed and experimentally validated. By recording the average power (i.e., reference signal received power in the long-term evolution) per DUT antenna port and selecting optimal complex weights at the CE output ports, a wireless cable connection can be achieved. The proposed method can be executed in a small RF shielded anechoic box and offers low system cost, high measurement reliability, and repeatability.

[1]  Gabriel M. Rebeiz Millimeter-wave and terahertz integrated circuit antennas , 1992, Proc. IEEE.

[2]  Preben E. Mogensen,et al.  A stochastic MIMO radio channel model with experimental validation , 2002, IEEE J. Sel. Areas Commun..

[3]  M.A. Jensen,et al.  A review of antennas and propagation for MIMO wireless communications , 2004, IEEE Transactions on Antennas and Propagation.

[4]  Pekka Kyosti,et al.  Channel Modelling for Multiprobe Over-the-Air MIMO Testing , 2012 .

[5]  David A. Sanchez-Hernandez,et al.  MIMO Over-The-Air Research, Development, and Testing , 2012 .

[6]  P. Hallbjorner,et al.  Multipath propagation simulator for V2X Communication Tests on Cars , 2013, 2013 7th European Conference on Antennas and Propagation (EuCAP).

[7]  A. Tatomirescu,et al.  MIMO 2×2 absolute data throughput concept , 2013, 2013 7th European Conference on Antennas and Propagation (EuCAP).

[8]  Reiner S. Thoma,et al.  3D wave-field synthesis for testing of radio devices , 2014, The 8th European Conference on Antennas and Propagation (EuCAP 2014).

[9]  Fredrik Tufvesson,et al.  Vehicle-to-Vehicle Propagation Models With Large Vehicle Obstructions , 2014, IEEE Transactions on Intelligent Transportation Systems.

[10]  Xiaoming Chen Experimental Investigation and Modeling of the Throughput of a 2 $\times$ 2 Closed-Loop MIMO System in a Reverberation Chamber , 2014, IEEE Transactions on Antennas and Propagation.

[11]  Xiaoming Chen Throughput Modeling and Measurement in an Isotropic-Scattering Reverberation Chamber , 2014, IEEE Transactions on Antennas and Propagation.

[12]  Jun Fan,et al.  Radiated Two-Stage Method for LTE MIMO User Equipment Performance Evaluation , 2014, IEEE Transactions on Electromagnetic Compatibility.

[13]  Fredrik Tufvesson,et al.  Measurement Uncertainty, Channel Simulation, and Disturbance Characterization of an Over-the-Air Multiprobe Setup for Cars at 5.9 GHz , 2015, IEEE Transactions on Industrial Electronics.

[14]  B. Ai,et al.  Characterization of Quasi-Stationarity Regions for Vehicle-to-Vehicle Radio Channels , 2015, IEEE Transactions on Antennas and Propagation.

[15]  G. Pedersen,et al.  Compact multiband sensing MIMO antenna array for cognitive radio system , 2015, 2015 Loughborough Antennas & Propagation Conference (LAPC).

[16]  Xu Zhao,et al.  Advances in antenna pattern-based MIMO OTA test methods , 2015, 2015 9th European Conference on Antennas and Propagation (EuCAP).

[17]  Giovanni Del Galdo,et al.  MIMO over-the-air testing for electrically large objects in non-anechoic environments , 2016, 2016 10th European Conference on Antennas and Propagation (EuCAP).

[18]  Bo Ai,et al.  On the Influence of Scattering From Traffic Signs in Vehicle-to-X Communications , 2016, IEEE Transactions on Vehicular Technology.

[19]  Mark A Beach,et al.  Testing 5G: evolution or revolution? , 2016 .

[20]  Fredrik Gunnarsson,et al.  LTE release 14 outlook , 2016, IEEE Communications Magazine.

[21]  Zheng Zhang,et al.  Recent advances in the radiated two-stage MIMO OTA test method and its value for antenna design optimization , 2016, 2016 10th European Conference on Antennas and Propagation (EuCAP).

[22]  Bo Ai,et al.  On Indoor Millimeter Wave Massive MIMO Channels: Measurement and Simulation , 2017, IEEE Journal on Selected Areas in Communications.