Optimized flexural hinge shapes for microsystems and high-precision applications

Positioning devices based on flexural hinges are often used in microsystems and precision mechanisms. In this work a nonlinear parametric optimization of flexural hinge shapes is performed. Predefined and freeform parametric shapes are compared in terms of compliance, strength, stress concentration factors and parasitic shifts. Transversal and axial compliances and stress concentration factors are also calculated, permitting design guidelines to be established. It is shown that optimized hinge shapes lead to far better performances with respect to conventional circular notches.

[1]  Simon Henein,et al.  Mechanical Design of a Spherical Grating Monochromator for the Microspectroscopy Beamline PolLux at the Swiss Light Source , 2007 .

[2]  Shorya Awtar,et al.  Synthesis and analysis of parallel Kinematic XY flexure mechanisms , 2003 .

[3]  Martin L. Culpepper,et al.  Design of a six-axis micro-scale nanopositioner—μHexFlex , 2006 .

[4]  Nicolae Lobontiu,et al.  Compliant Mechanisms: Design of Flexure Hinges , 2002 .

[5]  Martin L. Culpepper,et al.  Design of a low-cost nano-manipulator which utilizes a monolithic, spatial compliant mechanism , 2004 .

[6]  Deming Shu,et al.  Modular overconstrained weak-link mechanism for ultraprecision motion control , 2000 .

[7]  B. Zettl,et al.  Accurate low DOF modeling of a planar compliant mechanism with flexure hinges: the equivalent beam methodology , 2005 .

[8]  A. Slocum,et al.  Precision Machine Design , 1992 .

[9]  Placid Mathew Ferreira,et al.  A novel parallel-kinematics mechanisms for integrated, multi-axis nanopositioning: Part 1. Kinematics and design for fabrication , 2008 .

[10]  Walter D. Pilkey.  Peterson's Stress Concentration Factors , 1997 .

[11]  J. Paros.  How to design flexure hinges , 1965 .

[12]  F. Bona,et al.  Optimized Flexural Hinges for Compliant Micromechanisms , 2004 .

[13]  S. Henein,et al.  FLEXIBLE BEARINGS FOR HIGH-PRECISION MECHANISMS IN ACCELERATOR FACILITIES , 2007 .

[14]  Ren-Jung Chang,et al.  Development of mesoscopic polymer gripper system guided by precision design axioms , 2003 .

[15]  D. G. Ashwell,et al.  The Anticlastic Curvature of Rectangular Beams and Plates , 1950, The Journal of the Royal Aeronautical Society.

[16]  Stuart T. Smith,et al.  Flexures: Elements of Elastic Mechanisms , 2000 .

[17]  A. Thum,et al.  Der Entlastungsübergang , 1935 .

[18]  Placid Mathew Ferreira,et al.  A novel parallel-kinematics mechanism for integrated, multi-axis nanopositioning: Part 2: Dynamics, control and performance analysis , 2008 .

[19]  Sergio Baragetti,et al.  Costruzione di macchine I, 2a edizione , 2006 .

[20]  Nadim Maluf,et al.  An Introduction to Microelectromechanical Systems Engineering , 2000 .

[21]  S Y Perng,et al.  Development of a novel aspherical mirror bender for an active grating. , 2003, Journal of synchrotron radiation.

[22]  Stuart T. Smith,et al.  ELLIPTICAL FLEXURE HINGES , 1997 .

[23]  R. V. Baud.  Beiträge zur Kenntnis der Spannungsverteilung in prismatischen und keilförmigen Konstruktionselementen mit Querschnittübergängen , 1934 .