Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends

[1]  J. Hensel,et al.  WAAM of structural components—building strategies for varying wall thicknesses , 2023, Welding in the World.

[2]  K. Tang,et al.  Enhanced comprehensive properties of directed energy deposited Inconel 718 by a novel integrated deposition strategy , 2022, Journal of Materials Science & Technology.

[3]  R. Chaudhari,et al.  Effect of Multi-walled Structure on Microstructure and Mechanical Properties of 1.25Cr-1.0Mo Steel Fabricated by GMAW-based WAAM Using Metal-Cored Wire , 2022, Journal of Materials Research and Technology.

[4]  Ying Li,et al.  Achieving high performance of wire arc additive manufactured Mg–Y–Nd alloy assisted by interlayer friction stir processing , 2022, Journal of Materials Processing Technology.

[5]  W. Chen,et al.  Heterogeneous microstructure and anisotropic mechanical properties of reduced activation ferritic/martensitic steel fabricated by wire arc additive manufacturing , 2022, Nuclear Materials and Energy.

[6]  P. Shepherd,et al.  A review of WAAM for steel construction – Manufacturing, material and geometric properties, design, and future directions , 2022, Structures.

[7]  Basaran Bahadir Kocer,et al.  Aerial additive manufacturing with multiple autonomous robots , 2022, Nature.

[8]  X. Di,et al.  Improvement of mechanical properties and corrosion resistance for Wire arc additive manufactured Nickel alloy 690 by adding TiC particles , 2022, Journal of Alloys and Compounds.

[9]  Y. Zheng,et al.  Surface Morphology Refinement and Laves Phase Control of Plasma Arc Additively Manufactured Inconel 718 Via an Alternating Magnetic Field , 2022, SSRN Electronic Journal.

[10]  Xiao-nan Wang,et al.  Comparative study on the microstructure, mechanical properties and fracture mechanism of wire arc additive manufactured Inconel 718 alloy under the assistance of alternating magnetic field , 2022, Materials Science and Engineering: A.

[11]  C. Shen,et al.  Twin-wire directed energy deposition-arc of Ti–48Al–2Cr–2Nb alloy: Feasibility, microstructure, and tensile property investigation , 2022, Materials Science and Engineering: A.

[12]  Zhonggang Sun,et al.  Wire oscillating laser additive manufacturing of 2319 aluminum alloy: optimization of process parameters, microstructure, and mechanical properties , 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

[13]  Guohua Wu,et al.  An investigation into wire arc additive manufacturing of Mg-Y-RE-Zr alloy , 2022, Materials Letters.

[14]  S. Pramanik,et al.  Research progress in Arc based Additive Manufacturing of Aluminium alloys - A Review , 2022, Measurement.

[15]  I. Palani,et al.  Optimum Strength and Ductility of Pure Copper fabricated by Wire Arc Additive Manufacturing , 2022, Manufacturing Letters.

[16]  S. Dadbakhsh,et al.  Post-processing of additively manufactured metallic alloys – A review , 2022, International Journal of Machine Tools and Manufacture.

[17]  D. Fan,et al.  Microstructure regulation of titanium alloy functionally gradient materials fabricated by alternating current assisted wire arc additive manufacturing , 2022, Materials & Design.

[18]  F. Jiang,et al.  Effect and mechanism of inter-layer ultrasonic impact strengthening on the anisotropy of low carbon steel components fabricated by wire and arc additive manufacturing , 2022, Materials Science and Engineering: A.

[19]  K. Mpofu,et al.  Analysis of potential materials for local production of a rail car component using additive manufacturing , 2022, Heliyon.

[20]  M. Amirthalingam,et al.  Design and fabrication of micro-plasma transferred wire arc additive manufacturing system , 2022, CIRP Journal of Manufacturing Science and Technology.

[21]  N. Kumar,et al.  Wire Arc Additive Manufacturing – A revolutionary method in additive manufacturing , 2022, Materials Chemistry and Physics.

[22]  M. Vignesh,et al.  Magnesium role in additive manufacturing of biomedical implants – Challenges and opportunities , 2022, Additive Manufacturing.

[23]  Yutong Yuan,et al.  Low cycle fatigue behavior of wire arc additive manufactured and solution annealed 308 L stainless steel , 2022, Additive Manufacturing.

[24]  T. Abioye,et al.  Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications: A review , 2022, Materials Science and Technology.

[25]  L. Gardner,et al.  Mechanical Testing and Microstructural Analysis of Wire Arc Additively Manufactured Steels , 2022, SSRN Electronic Journal.

[26]  Yan Li,et al.  Comprehensive review of wire arc additive manufacturing: Hardware system, physical process, monitoring, property characterization, application and future prospects , 2022, Results in Engineering.

[27]  H. Sasahara,et al.  Improvement of Cooling Effect and Dimensional Accuracy of Wire and Arc Additive Manufactured Magnesium Alloy by Active-Cooling-Based Contacting Copper Blocks , 2022, Journal of Manufacturing and Materials Processing.

[28]  N. Kang,et al.  Effect of heat input on microstructure and mechanical property of wire-arc additive manufactured Ti-6Al-4V alloy , 2022, Welding in the World.

[29]  G. Çam,et al.  Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM) , 2022, Materials Today: Proceedings.

[30]  L. Tonelli,et al.  Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading , 2022, Construction and Building Materials.

[31]  Wei Zhou,et al.  Effect of Interpass Temperature on Wire Arc Additive Manufacturing Using High-Strength Metal-Cored Wire , 2022, Metals.

[32]  S. Konovalov,et al.  Investigation of Co-Cr-Fe-Mn-Ni Non-Equiatomic High-Entropy Alloy Fabricated by Wire Arc Additive Manufacturing , 2022, Metals.

[33]  Yue Zhao,et al.  Microstructure and Mechanical Property Improvement of AZ31B Induced by the Combination of Cold Metal Transfer Welding and Friction Stir Processing , 2022, Journal of Materials Engineering and Performance.

[34]  B. Cong,et al.  The effects of ultrasonic frequency pulsed arc on wire + arc additively manufactured high strength aluminum alloys , 2022, Additive Manufacturing.

[35]  Dong-Hee Lee,et al.  Real-time anomaly detection using convolutional neural network in wire arc additive manufacturing: molybdenum material , 2022, Journal of Materials Processing Technology.

[36]  Kun Liu,et al.  Effect of SiC addition on microstructure and properties of Al-Mg Alloy fabricated by powder and wire cold metal transfer process , 2022, Journal of Materials Research and Technology.

[37]  Jingya Wang,et al.  Effect of fabrication parameters on the microstructure and mechanical properties of wire arc additive manufactured AZ61 alloy , 2022, Materials Letters.

[38]  T. Baudin,et al.  Optimization of the pulsed arc welding parameters for wire arc additive manufacturing in austenitic steel applications , 2021, The International Journal of Advanced Manufacturing Technology.

[39]  Donghong Ding,et al.  Integration of a multi-directional wire arc additive manufacturing system with an automated process planning algorithm , 2021, J. Ind. Inf. Integr..

[40]  Xingfu Yu,et al.  Effect of heat treatment on rotating bending fatigue properties of K417G nickel-base superalloy , 2022, Journal of Alloys and Compounds.

[41]  Z. Lian,et al.  A study on the grain refinement mechanism of Ti-6Al-4V alloy produced by wire arc additive manufacturing using hydrogenation treatment processes , 2022 .

[42]  S. M. Shariff,et al.  Titanium Boride and Titanium Silicide Phase Formation by High Power Diode Laser Alloying of B 4C and SiC Particles with Ti: Microstructure, Hardness and Wear Studies , 2022, SSRN Electronic Journal.

[43]  K. Dilger,et al.  Mechanical properties of wire and arc additively manufactured high-strength steel structures , 2021, Welding in the World.

[44]  B. Cong,et al.  Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys , 2021, Additive Manufacturing.

[45]  B. Lu,et al.  Additive manufacturing of high performance AZ31 magnesium alloy with full equiaxed grains: Microstructure, mechanical property, and electromechanical corrosion performance , 2021, Journal of Materials Processing Technology.

[46]  Sanbao Lin,et al.  Effects of Interlayer Temperature on the Microstructures of Wire Arc Additive Manufactured Al-Zn-Mg-Cu alloy: Insights Into Texture Responses and Dynamic Precipitation Behaviors , 2021, Additive Manufacturing.

[47]  A. Bakulin,et al.  Effects of Water Cooling on the Microstructure of Electron Beam Additive-Manufactured Ti-6Al-4V , 2021, Metals.

[48]  Ł. Rogal,et al.  Microstructure, Mechanical Properties, and Martensitic Transformation in NiTi Shape Memory Alloy Fabricated Using Electron Beam Additive Manufacturing Technique , 2021, Journal of Materials Engineering and Performance.

[49]  Yanhu Wang,et al.  Microstructure and Mechanical Properties of Cu-6.5%Al Alloy Deposited by Wire Arc Additive Manufacturing , 2021, Metallography, Microstructure, and Analysis.

[50]  A. Nasiri,et al.  Microstructure and mechanical behavior of PH 13–8Mo martensitic stainless steel fabricated by wire arc additive manufacturing , 2021, Additive Manufacturing.

[51]  S. Pierce,et al.  Multi-Layer Ultrasonic Imaging of As-Built Wire + Arc Additive Manufactured Components , 2021, Additive Manufacturing.

[52]  D. Wexler,et al.  Tailoring the surface finish, dendritic microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy by magnetic arc oscillation , 2021, Additive Manufacturing.

[53]  J. Lange,et al.  3D‐Printing with Steel ‐ Additive Manufacturing Connections and Structures , 2021, ce/papers.

[54]  H. Roven,et al.  Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing , 2021, Materials.

[55]  L. Wang,et al.  Effect of Vanadium Contents on Microstructure and Mechanical Properties of Ti–6Al–xV Components Produced by Wire + Arc Additive Manufacturing , 2021, MATERIALS TRANSACTIONS.

[56]  D. Kim,et al.  Effects of process parameters on bead shape, microstructure, and mechanical properties in wire + arc additive manufacturing of Al0.1CoCrFeNi high-entropy alloy , 2021, Journal of Manufacturing Processes.

[57]  Z. Cai,et al.  Microstructure and Mechanical Properties of Wire Arc Additively Manufactured MoNbTaWTi High Entropy Alloys , 2021, Materials.

[58]  Yueling Guo,et al.  Improving mechanical properties of wire arc additively manufactured AA2196 Al–Li alloy by controlling solidification defects , 2021, Additive Manufacturing.

[59]  M. Celikin,et al.  Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing , 2021, Journal of Magnesium and Alloys.

[60]  B. Guo,et al.  Effect of grain refinement induced by wire and arc additive manufacture (WAAM) on the corrosion behaviors of AZ31 magnesium alloy in NaCl solution , 2021 .

[61]  Xin Lin,et al.  Hot deformation induced microstructural evolution in local-heterogeneous wire + arc additive manufactured 2219 Al alloy , 2021 .

[62]  E. Kolubaev,et al.  Structure and Mechanical Properties of Cu–Al–Si–Mn System-Based Copper Alloy Obtained by Additive Manufacturing , 2021, Russian Physics Journal.

[63]  Xizhang Chen,et al.  Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties , 2021 .

[64]  R. Pramod,et al.  Wire arc additive manufacturing for repairing aluminium structures in marine applications , 2021 .

[65]  O. Panchenko,et al.  Gas Metal Arc Welding Modes in Wire Arc Additive Manufacturing of Ti-6Al-4V , 2021, Materials.

[66]  J. Volpp,et al.  Oxidation in wire arc additive manufacturing of aluminium alloys , 2021 .

[67]  N. Shanmugam,et al.  Studies on Super Duplex Stainless Steel Manufactured by Wire Arc Additive Manufacturing , 2021, Transactions of the Indian Institute of Metals.

[68]  Valdemar R. Duarte,et al.  Ultracold-Wire and Arc Additive Manufacturing (UC-WAAM) , 2021 .

[69]  N. Arivazhagan,et al.  Technology Development for Producing Inconel 625 in Aerospace Application Using Wire Arc Additive Manufacturing Process , 2021, Journal of Materials Engineering and Performance.

[70]  Yu Ziping,et al.  Robotic skeleton arc additive manufacturing of aluminium alloy , 2021, The International Journal of Advanced Manufacturing Technology.

[71]  Dimitrios Tzovaras,et al.  Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review , 2021, Progress in Additive Manufacturing.

[72]  J. Volpp,et al.  Porosity in wire arc additive manufacturing of aluminium alloys , 2021, Additive Manufacturing.

[73]  Américo Scotti,et al.  The Concept of a Novel Path Planning Strategy for Wire + Arc Additive Manufacturing of Bulky Parts: Pixel , 2021, Metals.

[74]  S. Mohan Kumar,et al.  Microstructural Features and Mechanical Integrity of Wire Arc Additive Manufactured SS321/Inconel 625 Functionally Gradient Material , 2021, Journal of Materials Engineering and Performance.

[75]  T. Seefeld,et al.  Investigating the Reproducibility of the Wire Arc Additive Manufacturing Process , 2021, Advanced Materials Research.

[76]  T. Klein,et al.  Microstructure Formation and Mechanical Properties of a Wire-Arc Additive Manufactured Magnesium Alloy , 2021, JOM.

[77]  Z. Pan,et al.  A practical fabrication strategy for wire arc additive manufacturing of metallic parts with wire structures , 2021, The International Journal of Advanced Manufacturing Technology.

[78]  P. Prangnell,et al.  The potential for grain refinement of Wire-Arc Additive Manufactured (WAAM) Ti-6Al-4V by ZrN and TiN inoculation , 2021, Additive Manufacturing.

[79]  H. Paris,et al.  Wire and arc additive manufacturing of 308L stainless steel components: Optimization of processing parameters and material properties , 2021 .

[80]  H. Paris,et al.  Influences of the compressed dry air-based active cooling on external and internal qualities of wire-arc additive manufactured thin-walled SS308L components , 2021 .

[81]  M. Feng,et al.  Wire-arc additive manufacturing of AZ31 magnesium alloy fabricated by cold metal transfer heat source: Processing, microstructure, and mechanical behavior , 2021 .

[82]  Yanhu Wang,et al.  Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing , 2021, Journal of Materials Engineering and Performance.

[83]  I. Gibson,et al.  Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts , 2021 .

[84]  Changmeng Liu,et al.  Dynamic response of Ti-6.5Al–1Mo–1V–2Zr-0.1B alloy fabricated by wire arc additive manufacturing , 2021 .

[85]  B. Lu,et al.  Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering , 2021 .

[86]  R. Jayaganthan,et al.  Influence of droplet transfer behaviour on the microstructure, mechanical properties and corrosion resistance of wire arc additively manufactured Inconel (IN) 625 components , 2021, Welding in the World.

[87]  Pinelopi Kyvelou,et al.  An end-to-end framework for the additive manufacture of optimized tubular structures , 2021, IEEE Access.

[88]  J. Umeda,et al.  Refined grain formation behavior and strengthening mechanism of α-titanium with nitrogen fabricated by selective laser melting , 2020 .

[89]  Chunli Yang,et al.  Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties , 2020 .

[90]  Huimin Gu,et al.  Microstructure and properties of Al–7Si–0.6Mg alloys with different Ti contents deposited by wire arc additive manufacturing , 2020, Rare Metals.

[91]  A. Filippov,et al.  Characterization of gradient CuAl–B4C composites additively manufactured using a combination of wire-feed and powder-bed electron beam deposition methods , 2020 .

[92]  J. Bi,et al.  Microstructure and mechanical properties of AZ91 Mg alloy fabricated by cold metal transfer additive manufacturing , 2020 .

[93]  Telmo G. Santos,et al.  Hot forging wire and arc additive manufacturing (HF-WAAM) , 2020, Additive Manufacturing.

[94]  Bintao Wu,et al.  Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing , 2020 .

[95]  D. Song,et al.  30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges , 2020 .

[96]  G. Quan,et al.  Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding , 2020 .

[97]  Aimin Wang,et al.  Study on the deposition accuracy of omni-directional GTAW-based additive manufacturing , 2020 .

[98]  J. Volpp,et al.  Fluctuation effects in Wire Arc Additive Manufacturing of aluminium analysed by high-speed imaging , 2020, Journal of Manufacturing Processes.

[99]  Z. Pan,et al.  Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy , 2020 .

[100]  Jörg Lange,et al.  3D printing with steel , 2020, Steel Construction.

[101]  M. Höfemann,et al.  Arc-welding based additive manufacturing for body reinforcement in automotive engineering , 2020, Welding in the World.

[102]  Valdemar R. Duarte,et al.  In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM) , 2020 .

[103]  Jianxun Zhang,et al.  Comparative study on the microstructures and properties of wire+arc additively manufactured 5356 aluminium alloy with argon and nitrogen as the shielding gas , 2020 .

[104]  M. N. Sudin,et al.  Influence of Process Parameters in Wire and Arc Additive Manufacturing (WAAM) Process , 2020, journal of Mechanical Engineering.

[105]  Wei Chen,et al.  Effects of Location on the Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Produced Through Wire Arc Additive Manufacturing , 2020, Journal of Materials Engineering and Performance.

[106]  Stefan Gneiger,et al.  Development of a High Strength Magnesium Alloy for Wire Arc Additive Manufacturing , 2020, Metals.

[107]  Oguzhan Yilmaz,et al.  Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics , 2020, The International Journal of Advanced Manufacturing Technology.

[108]  F. Jiang,et al.  Anisotropic mechanical properties and deformation behavior of low-carbon high-strength steel component fabricated by wire and arc additive manufacturing , 2020, Materials Science and Engineering: A.

[109]  P. Prangnell,et al.  The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V , 2020, Metallurgical and Materials Transactions A.

[110]  T. Klein,et al.  Control of macro-/microstructure and mechanical properties of a wire-arc additive manufactured aluminum alloy , 2020 .

[111]  Yusheng Shi,et al.  Forming and mechanical properties of wire arc additive manufacture for marine propeller bracket , 2020 .

[112]  Bu-gao Guo,et al.  Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on microstructural and mechanical properties in Ti–6Al–4V alloy , 2020 .

[113]  Z. Pan,et al.  In-situ dual wire arc additive manufacturing of NiTi-coating on Ti6Al4V alloys: Microstructure characterization and mechanical properties , 2020 .

[114]  Sameehan S. Joshi,et al.  Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium , 2020, The International Journal of Advanced Manufacturing Technology.

[115]  A. Nasiri,et al.  Comparison of microstructural characteristics and mechanical properties of shipbuilding steel plates fabricated by conventional rolling versus wire arc additive manufacturing , 2020, Additive Manufacturing.

[116]  F. Martina,et al.  Grain refinement in an unalloyed tantalum structure by combining Wire+Arc additive manufacturing and vertical cold rolling , 2020 .

[117]  Xin Lin,et al.  Microstructure and mechanical properties of wire and arc additive manufactured AZ31 magnesium alloy using cold metal transfer process , 2020 .

[118]  Xin Lin,et al.  Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy , 2020, Journal of Materials Science & Technology.

[119]  Xin Lin,et al.  A study on obtaining equiaxed prior-β grains of wire and arc additive manufactured Ti–6Al–4V , 2020 .

[120]  Lei Li,et al.  Formability, microstructure and mechanical properties of Ti-6Al-4V deposited by wire and arc additive manufacturing with different deposition paths , 2020 .

[121]  M. Zaeh,et al.  Towards Wire and Arc Additive Manufacturing of High-Quality Parts , 2020 .

[122]  E. Shehab,et al.  Industry 4.0: Challenges and opportunities for Kazakhstan SMEs , 2020 .

[123]  G. Casalino,et al.  FEM model for TIG hybrid laser butt welding of 6 mm thick austenitic to martensitic stainless steels , 2020 .

[124]  Paolo Claudio Priarone,et al.  Multi-criteria environmental and economic impact assessment of wire arc additive manufacturing , 2020 .

[125]  M. Klein,et al.  Welding Process for the Additive Manufacturing of Cantilevered Components with the WAAM , 2020 .

[126]  Z. Pan,et al.  Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process , 2020 .

[127]  H. Sasahara,et al.  Development of a cooperative system for wire and arc additive manufacturing and machining , 2020 .

[128]  Telmo G. Santos,et al.  Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice , 2020 .

[129]  F. Veiga,et al.  Experimental Investigation of the Influence of Wire Arc Additive Manufacturing on the Machinability of Titanium Parts , 2019, Metals.

[130]  C. Li,et al.  Study on Microstructural and Mechanical Properties of an Al–Cu–Sn Alloy Wall Deposited by Double-Wire Arc Additive Manufacturing Process , 2019, Materials.

[131]  C. Li,et al.  Effect of Mg Content on Microstructure and Properties of Al–Mg Alloy Produced by the Wire Arc Additive Manufacturing Method , 2019, Materials.

[132]  M. Gibson,et al.  Additive manufacturing of ultrafine-grained high-strength titanium alloys , 2019, Nature.

[133]  Bintao Wu,et al.  In-Situ Fabrication of Titanium Iron Intermetallic Compound by the Wire Arc Additive Manufacturing Process , 2019, Metallurgical and Materials Transactions A.

[134]  Qi Zhou,et al.  Microstructure and mechanical properties of Ti–6Al–4V alloy fabricated using electron beam freeform fabrication , 2019, Vacuum.

[135]  Yanhu Wang,et al.  In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon , 2019, Applied Surface Science.

[136]  Xizhang Chen,et al.  Effect of heat input on microstructure and mechanical properties of Al-Mg alloys fabricated by WAAM , 2019, Applied Surface Science.

[137]  Aimin Wang,et al.  A sequential path-planning methodology for wire and arc additive manufacturing based on a water-pouring rule , 2019, The International Journal of Advanced Manufacturing Technology.

[138]  D. Kim,et al.  Heat treatment effects on Inconel 625 components fabricated by wire + arc additive manufacturing (WAAM)—part 1: microstructural characterization , 2019, The International Journal of Advanced Manufacturing Technology.

[139]  G. Quan,et al.  Microstructure and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy , 2019, Materials Letters.

[140]  L. Quintino,et al.  Non-destructive testing for wire + arc additive manufacturing of aluminium parts , 2019, Additive Manufacturing.

[141]  Faiz Redza Ramli,et al.  Review of Wire Arc Additive Manufacturing for 3D Metal Printing , 2019, Int. J. Autom. Technol..

[142]  Xin Lin,et al.  Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti 6Al 4V , 2019, Materials Science and Engineering: A.

[143]  S. Williams,et al.  Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via wire + arc additive manufacture , 2019, International Journal of Refractory Metals and Hard Materials.

[144]  F. Martina,et al.  Functionally graded structures of refractory metals by wire arc additive manufacturing , 2019, Science and Technology of Welding and Joining.

[145]  A. Azar,et al.  Heat source management in wire-arc additive manufacturing process for Al-Mg and Al-Si alloys , 2019, Additive Manufacturing.

[146]  Xiao Huang,et al.  Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure , 2019, Additive Manufacturing.

[147]  F. Martina,et al.  Microstructure and thermal properties of unalloyed tungsten deposited by Wire + Arc Additive Manufacture , 2019, Journal of Nuclear Materials.

[148]  Stewart Williams,et al.  Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components , 2019, International Journal of Refractory Metals and Hard Materials.

[149]  Hongli Fan,et al.  Reducing arc heat input and obtaining equiaxed grains by hot-wire method during arc additive manufacturing titanium alloy , 2019, Materials Science and Engineering: A.

[150]  Masanobu Nakamura,et al.  Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing , 2019, Precision Engineering.

[151]  B. Baufeld,et al.  Wire-based electron beam additive manufacturing , 2019 .

[152]  Hongli Fan,et al.  Residual Stress, Mechanical Properties, and Grain Morphology of Ti-6Al-4V Alloy Produced by Ultrasonic Impact Treatment Assisted Wire and Arc Additive Manufacturing , 2018, Metals.

[153]  Lei Wang,et al.  Correlations between Microstructure Characteristics and Mechanical Properties in 5183 Aluminium Alloy Fabricated by Wire-Arc Additive Manufacturing with Different Arc Modes , 2018, Materials.

[154]  Bintao Wu,et al.  A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement , 2018, Journal of Manufacturing Processes.

[155]  Daniel T. Valentine,et al.  Study of mass transport in cold wire deposition for Wire Arc Additive Manufacturing , 2018, International Journal of Heat and Mass Transfer.

[156]  Vimal Dhokia,et al.  Invited review article: Strategies and processes for high quality wire arc additive manufacturing , 2018, Additive Manufacturing.

[157]  Bintao Wu,et al.  The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy , 2018, Journal of Materials Processing Technology.

[158]  N. Kim,et al.  Magnesium Alloy 3D Printing by Wire and Arc Additive Manufacturing (WAAM) , 2018, MRS Advances.

[159]  Y. Chen,et al.  Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments , 2018, Journal of Alloys and Compounds.

[160]  Paul A. Colegrove,et al.  Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling , 2018, Materials & Design.

[161]  Lei Liu,et al.  Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening , 2018 .

[162]  Karan Derekar,et al.  A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium , 2018 .

[163]  Paul A. Colegrove,et al.  Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement , 2018 .

[164]  Ming Gao,et al.  Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source , 2018 .

[165]  Jian Han,et al.  Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V , 2017 .

[166]  S. Williams,et al.  Assessing the effect of TIG alternating current time cycle on aluminium wire + arc additive manufacture , 2017 .

[167]  Brandon A. Krick,et al.  Wire and arc additive manufactured steel: Tensile and wear properties , 2017 .

[168]  Changmeng Liu,et al.  Obtaining fine microstructure and unsupported overhangs by low heat input pulse arc additive manufacturing , 2017 .

[169]  Xiaolong Wang,et al.  Finite element analysis of clamping form in wire and arc additive manufacturing , 2017, 2017 7th International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO).

[170]  Matthew S. Dargusch,et al.  Grain refinement of wire arc additively manufactured titanium by the addition of silicon , 2017 .

[171]  Dominic Cuiuri,et al.  Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process , 2017 .

[172]  Jinglong Li,et al.  Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts , 2017, Journal of Materials Engineering and Performance.

[173]  Stewart Williams,et al.  Preliminary Investigation into the Suitability of 2xxx Alloys for Wire-Arc Additive Manufacturing , 2016 .

[174]  Dominic Cuiuri,et al.  Adaptive path planning for wire-feed additive manufacturing using medial axis transformation , 2016 .

[175]  Jing Guo,et al.  Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency , 2016, Materials.

[176]  A. Addison,et al.  Wire + Arc Additive Manufacturing , 2016 .

[177]  Ronald Aman,et al.  Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing , 2016 .

[178]  J. Gu,et al.  The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al–6.3Cu alloy , 2016 .

[179]  Thilo Pirling,et al.  A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components , 2016 .

[180]  Huijun Li,et al.  A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures , 2015 .

[181]  Zengxi Pan,et al.  Wire-feed additive manufacturing of metal components: technologies, developments and future interests , 2015 .

[182]  E. A. Alberti,et al.  Additive manufacturing using plasma transferred arc , 2016 .

[183]  C. Paul,et al.  Development of micro-plasma transferred arc (μ-PTA) wire deposition process for additive layer manufacturing applications , 2014 .

[184]  Paul A. Colegrove,et al.  A computationally efficient finite element model of wire and arc additive manufacture , 2013, The International Journal of Advanced Manufacturing Technology.

[185]  F. Martina.  Investigation of methods to manipulate geometry, microstructure and mechanical properties in titanium large scale Wire+Arc Additive Manufacturing , 2014 .

[186]  A. Clare,et al.  A parametric study of Inconel 625 wire laser deposition , 2013 .

[187]  Paul A. Colegrove,et al.  Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling , 2013 .

[188]  Guilan Wang,et al.  Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling , 2013 .

[189]  P. He,et al.  Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process , 2013 .

[190]  Alain Bernard,et al.  Rapid manufacturing of metallic objects , 2012 .

[191]  Lin Wu,et al.  A 3D dynamic analysis of thermal behavior during single-pass multi-layer weld-based rapid prototyping , 2011 .

[192]  B. Baufeld,et al.  Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties , 2010 .

[193]  D. StJohn,et al.  Beryllium as a grain refiner in titanium alloys , 2009 .

[194]  Radovan Kovacevic,et al.  Rapid prototyping of 4043 Al-alloy parts by VP-GTAW , 2004 .

[195]  Radovan Kovacevic,et al.  Automated torch path planning using polygon subdivision for solid freeform fabrication based on welding , 2004 .

[196]  R. Cornet,et al.  Preface , 2008, KR-MED.

[197]  H. Waszink,et al.  Experimental Investigation of the Forces Acting on a Drop of Weld Metal The mass of weld metal droplets during globular transfer is measured as a function of electric current and gas flow , 1983 .