High Bandgap (1.9 eV) Polymer with Over 8% Efficiency in Bulk Heterojunction Solar Cells

[1]  Yongfang Li Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[2]  Hongbin Wu,et al.  Dithieno[3,2-b:2′,3′-d]pyridin-5(4H)-one-based polymers with a bandgap up to 2.02 eV for high performance field-effect transistors and polymer solar cells with an open-circuit voltage up to 0.98 V and an efficiency up to 6.84% , 2015 .

[3]  Yongfang Li,et al.  6.5% Efficiency of Polymer Solar Cells Based on poly(3‐hexylthiophene) and Indene‐C60 Bisadduct by Device Optimization , 2010, Advanced materials.

[4]  Jianhui Hou,et al.  Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene. , 2014, Accounts of chemical research.

[5]  Yongfang Li,et al.  Conjugated Side-Chain-Isolated D–A Copolymers Based on Benzo[1,2-b:4,5-b′]dithiophene-alt-dithienylbenzotriazole: Synthesis and Photovoltaic Properties , 2012 .

[6]  Zhishan Bo,et al.  High-efficiency large-bandgap material for polymer solar cells. , 2015, Macromolecular rapid communications.

[7]  J. Ferraris,et al.  Enhanced and Tunable Open-Circuit Voltage using Dialkylthio Benzo[1,2-b:4,5-b′]dithiophene in Polymer Solar Cells , 2012 .

[8]  M. Leclerc,et al.  Effect of processing additive on morphology and charge extraction in bulk-heterojunction solar cells , 2014 .

[9]  Wei Li,et al.  Benzo[1,2-b:4,5-b′]dithiophene and Thieno[3,4-c]pyrrole-4,6-dione Based Donor-π-Acceptor Conjugated Polymers for High Performance Solar Cells by Rational Structure Modulation , 2015 .

[10]  Gang Li,et al.  Recent trends in polymer tandem solar cells research , 2013 .

[11]  A. Heeger,et al.  Single‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7% , 2015, Advanced materials.

[12]  Zhishan Bo,et al.  4-Alkyl-3,5-difluorophenyl-Substituted Benzodithiophene-Based Wide Band Gap Polymers for High-Efficiency Polymer Solar Cells. , 2016, ACS applied materials & interfaces.

[13]  K. S. Narayan,et al.  Area dependent efficiency of organic solar cells , 2008 .

[14]  J. Ferraris,et al.  A novel dialkylthio benzo[1,2-b:4,5-b']dithiophene derivative for high open-circuit voltage in polymer solar cells. , 2011, Chemical communications.

[15]  Feng Liu,et al.  Single-junction polymer solar cells with high efficiency and photovoltage , 2015, Nature Photonics.

[16]  Bumjoon J. Kim,et al.  Poly(benzodithiophene) Homopolymer for High-Performance Polymer Solar Cells with Open-Circuit Voltage of Near 1 V: A Superior Candidate To Substitute for Poly(3-hexylthiophene) as Wide Bandgap Polymer , 2015 .

[17]  Yongfang Li,et al.  High-performance polymer solar cells based on a 2D-conjugated polymer with an alkylthio side-chain , 2016 .

[18]  John R. Tumbleston,et al.  Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement , 2013 .

[19]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[20]  Yongfang Li,et al.  High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive , 2012 .

[21]  Liang Yan,et al.  A General Approach toward Electron Deficient Triazole Units to Construct Conjugated Polymers for Solar Cells , 2015 .

[22]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[23]  P. Beaujuge,et al.  Wide Band-Gap 3,4-Difluorothiophene-Based Polymer with 7% Solar Cell Efficiency: An Alternative to P3HT , 2015 .

[24]  Wendimagegn Mammo,et al.  25th Anniversary Article: Isoindigo‐Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors , 2014, Advanced materials.

[25]  Yue Wang,et al.  A water-soluble metallophthalocyanine derivative as a cathode interlayer for highly efficient polymer solar cells , 2014 .

[26]  Dan Sun,et al.  Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7. , 2015, Journal of the American Chemical Society.

[27]  R. Street,et al.  Tandem Solar Cells Made from Amorphous Silicon and Polymer Bulk Heterojunction Sub‐Cells , 2015, Advanced materials.

[28]  W. You,et al.  Rational Design of High Performance Conjugated Polymers for Organic Solar Cells , 2012 .

[29]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[30]  O. Inganäs,et al.  Structure–property relationships of oligothiophene–isoindigo polymers for efficient bulk-heterojunction solar cells , 2014 .

[31]  Yongfang Li,et al.  Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution , 2014 .

[32]  O. Inganäs,et al.  A Facile Method to Enhance Photovoltaic Performance of Benzodithiophene‐Isoindigo Polymers by Inserting Bithiophene Spacer , 2014 .

[33]  Robert P. H. Chang,et al.  Polymer solar cells with enhanced fill factors , 2013, Nature Photonics.

[34]  John R. Tumbleston,et al.  Controlling Molecular Weight of a High Efficiency Donor‐Acceptor Conjugated Polymer and Understanding Its Significant Impact on Photovoltaic Properties , 2014, Advanced materials.

[35]  Jisoo Shin,et al.  Energy Level Engineering of Donor Polymers via Inductive and Resonance Effects for Polymer Solar Cells: Effects of Cyano and Alkoxy Substituents , 2015 .

[36]  A. Salleo,et al.  Enhanced Photovoltaic Performance of Indacenodithiophene‐Quinoxaline Copolymers by Side‐Chain Modulation , 2014 .

[37]  Jianqi Zhang,et al.  All‐Polymer Solar Cells Based on Absorption‐Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27% , 2016, Advanced materials.

[38]  Q. Peng,et al.  Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells. , 2013, Journal of the American Chemical Society.

[39]  Gang Li,et al.  10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub‐Cells , 2013, Advanced materials.

[40]  H. Ade,et al.  A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance , 2015, Advanced materials.

[41]  Wei You,et al.  Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells. , 2011, Journal of the American Chemical Society.

[42]  Larry R. Dalton,et al.  Donor-Acceptor Thiolated Polyenic Chromophores Exhibiting Large Optical Nonlinearity and Excellent Photostability , 2008 .

[43]  U. Jeng,et al.  Improving Device Efficiency of Polymer/Fullerene Bulk Heterojunction Solar Cells Through Enhanced Crystallinity and Reduced Grain Boundaries Induced by Solvent Additives , 2011, Advanced materials.

[44]  Long Ye,et al.  Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain , 2014 .

[45]  M. Muccini,et al.  2D π-conjugated benzo[1,2-b:4,5-b']dithiophene- and quinoxaline-based copolymers for photovoltaic applications , 2013 .