Hydraulic Actuation System with Active Control for the Lateral Suspensions of High Speed Trains

High speed trains normally use actively controlled pneumatic systems to recentre the car body with respect to the bogie when the train negotiates a curve. Pneumatic systems are used because of their softness, which adds a little contribution to the elastic force generated by the mechanical springs of the lateral suspension system, thereby allowing the necessary dynamic isolation between car body and bogie. However, pneumatic systems have the drawbacks of large dimensions and slow response, often accompanied by a few damped oscillations. An innovative solution was developed that makes use of hydraulic actuators, providing them with artifi cial compliance generated by an appropriate control, hence making the hydraulic actuators suitable for this application. A car body centring system is thus obtained that presents fast response, small volume and a softness comparable to that of a pneumatic system. The optimal control law for this system was defi ned, the system dynamic characteristics were analysed and a technological demonstrator was built to assess the system merits. The paper outlines the theoretical grounds for the system control, its performance and the most signifi cant results obtained during a test campaign conducted on the technological demonstrator.

[1]  Roger M. Goodall,et al.  Control and monitoring for railway vehicle dynamics , 2007 .

[2]  T. J. Viersma,et al.  Analysis, Synthesis and Design of Hydraulic Servosystems and Pipelines , 1981 .

[3]  J. D. Fryer.  Control of fluid power: Analysis and design: by D. McCloy and H.R. Martin, 2nd (Revised) Edition, Ellis Horwood, Chichester, 1980. ISBN 0-85312-135-4, 505 pages. Numerous figures, hardback £26.00; paper edition £8.50/US$22.45 , 1981 .

[4]  Simon Iwnicki,et al.  Handbook of railway vehicle dynamics , 2006 .

[5]  Katsuya Tanifuji,et al.  Mechatronics in Japanese Rail Vehicles: Active and Semi-Active Suspensions , 2000 .

[6]  Carlos Casanueva,et al.  A lateral active suspension for conventional railway bogies , 2009 .

[7]  J. K. Hedrick,et al.  Pneumatic Actuators for Vehicle Active Suspension Applications , 1985 .

[8]  Stefano Bruni,et al.  Mathematical modelling of the secondary airspring suspension in railway vehicles and its effect on safety and ride comfort , 2010 .

[9]  Roger M. Goodall,et al.  Carbody tilting – technologies and benefits , 2009 .

[10]  K Sasaki.  A STUDY OF PNEUMATIC AND HYDRAULIC ACTIVE SUSPENSION OF RAILWAY VEHICLE , 1997 .

[11]  Roger M. Goodall,et al.  Mechatronic developments for railway vehicles of the future , 2000 .

[12]  Roger M. Goodall.  Tilting trains and beyond - the future for active railway suspensions. Part 2: Improving stability and guidance , 1999 .

[13]  Giovanni Jacazio,et al.  Real-time loading actuator control for an advanced aerospace test rig , 2007 .

[14]  David Newland,et al.  SUSPENSION AND STRUCTURE: SOME FUNDAMENTAL DESIGN CONSIDERATIONS FOR RAILWAY VEHICLES , 1975 .

[15]  Liao Yingying.  Effects of time delay on semi-active control for high-speed railway vehicle suspension systems , 2011 .

[16]  K. Abood,et al.  Railway Carriage Model to Study the Influence of Vertical Secondary Stiffness on Ride Comfort of Railway Carbody Running on Curved Tracks , 2011 .