Porosity of freeze-dried γ-Al2O3 powders

[1]  R. Moreno,et al.  Synthesis of γ-Al2O3 nanopowders by freeze-drying , 2006 .

[2]  I. Santacruz,et al.  A Novel Method to Prepare Zeolites with Hierarchical Porosity , 2005 .

[3]  S. Suárez,et al.  Rh/γ-Al2O3–sepiolite monolithic catalysts for decomposition of N2O traces , 2005 .

[4]  J. M. Benito,et al.  Membranas cerámicas: tipos, métodos de obtención y caracterización , 2004 .

[5]  O. Lyckfeldt,et al.  Freeze Granulation for the Processing of Silicon Nitride Ceramics , 2004 .

[6]  S. Mullens,et al.  SiC Foams Produced by Gel Casting: Synthesis and Characterization , 2004 .

[7]  S. Suárez,et al.  CuO/NiO monolithic catalysts for NOx removal from nitric acid plant flue gas , 2004 .

[8]  C. Coddet,et al.  Influence of slurry characteristics on the morphology of spray-dried alumina powders , 2003 .

[9]  K. Okada,et al.  Preparation of porous silica from vermiculite by selective leaching , 2003 .

[10]  Yasuyuki Takahata,et al.  A new technique for preparing ceramics for catalyst support exhibiting high porosity and high heat resistance , 2001 .

[11]  A. Solbes,et al.  Nanostructured ceria-based catalysts for oxydehydrogenation of ethane with CO2 , 2001 .

[12]  T. Ohji,et al.  Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process , 2001 .

[13]  J. Binner,et al.  Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers , 1999 .

[14]  D. Klvana,et al.  Synthesis and characterization of perovskite catalysts , 1999 .

[15]  T. Chartier,et al.  Binder Distribution in Spray-Dried Alumina Agglomerates , 1998 .

[16]  G. Messing,et al.  Critical Factors in the Production of Sol-Gel Derived Porous Alumina , 1995 .

[17]  L. Klein,et al.  Porous Silica by the Sol-Gel Process , 1995 .

[18]  D. Avnir,et al.  Recommendations for the characterization of porous solids (Technical Report) , 1994 .

[19]  I. Lloyd,et al.  Characterization of freeze-dried alumina powders using electron microscopy , 1989 .

[20]  K. Miller,et al.  Low density ceramics fabricated from reticulated polymer substrates , 1987 .

[21]  J. Mackenzie,et al.  The leaching of phase-separated sodium borosilicate glasses , 1979 .

[22]  G. H. Stewart.  Science of ceramics , 1963 .

[23]  Eugene Ryshkewitch,et al.  Compression Strength of Porous Sintered Alumina and Zirconia , 1953 .

[24]  K. Uematsu,et al.  Spray-freeze-dried granules for ceramics fabrication , 2002 .

[25]  J. Blanco,et al.  Sepiolite based monolithic catalysts for the reduction of nitric oxide with propylene in oxidising atmosphere , 1995 .

[26]  A. Sherman,et al.  Refractory ceramic foams : a novel, new high-temperature structure , 1991 .

[27]  M. Eatough,et al.  The morphology of freeze-dried rubidium chloride powder , 1989 .

[28]  I. Lloyd,et al.  Pore morphology in cryochemically prepared alumina powders and their sulphate precursors , 1988 .

[29]  W. H. Gitzen.  Alumina as a ceramic material , 1970 .