论文信息 - Performance Assessment of an Impact Rig

Performance Assessment of an Impact Rig

A recent upgrading of a drop hammer rig was carried out and a series of calibration tests established the energy losses in the existing anvil. Both the test results and the mathematical modelling showed that significant energy losses would occur at high impact loads. An alternative anvil design considerably reduced the energy losses and improved the performance of the drop hammer rig.

Norman Jones | R. S. Birch | W S Jouri

[1] C. P. Kothandaraman,et al. Heat and mass transfer data book , 1977 .

[2] James Prescott Joule,et al. On Some Thermo-Dynamic Properties of Solids , 1859 .

[3] Norman Jones,et al. Dynamic progressive buckling of circular and square tubes , 1986 .

[4] James Prescott Joule,et al. III. On the thermo-electricity of ferruginous metals, and on the thermal effects of stretching solid bodies , 1857, Proceedings of the Royal Society of London.

[5] Norman Jones,et al. Dynamic axial crushing of circular tubes , 1984 .

[6] Geoffrey Ingram Taylor,et al. The Latent Energy Remaining in a Metal after Cold Working , 1934 .

[7] N Jones. The rigid plastic model for structures loaded dynamically , 1987 .

[8] Norman Jones,et al. ON THE SCALING OF SHIP COLLISION DAMAGE , 1984 .

[9] W. Abramowicz,et al. Dynamic axial crushing of square tubes , 1984 .

[10] James Prescott Joule. II. On some thermo-dynamic properties of solids , 1859, Proceedings of the Royal Society of London.

[11] G. S. T. Armer,et al. Design for dynamic loading : the use of model analysis , 1982 .

[12] Norman Jones,et al. Measurement of Impact Loads using a Laser Doppler Velocimeter , 1990 .

[13] R. H. Wagoner,et al. An analytical investigation of deformation-induced heating in tensile testing , 1987 .

[14] G. Taylor,et al. The Heat Developed during Plastic Extension of Metals , 1925 .