Some Investigations of Scaling Effects in Micro-Cutting

[1]  Walter Rosenhain,et al.  Cutting Tools Research Committee. Report on Flow and Rupture of Metals during Cutting , 1925 .

[2]  M. E. Merchant.  Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip , 1945 .

[3]  V. Piispanen.  Theory of Formation of Metal Chips , 1948 .

[4]  D. C. Drucker.  An Analysis of the Mechanics of Metal Cutting , 1949 .

[5]  M. C. Shaw,et al.  A Quantized Theory of Strain Hardening as Applied to the Cutting of Metals , 1950 .

[6]  W. B. Palmer,et al.  Mechanics of Orthogonal Machining , 1959 .

[7]  E. Armarego,et al.  ON THE SIZE EFFECT IN METAL CUTTING , 1961 .

[8]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[9]  Kiyoshi Tamura,et al.  Size Effect in Metal Cutting Force , 1965 .

[10]  R. H. Brown,et al.  An investigation of the deformation in orthogonal cutting , 1965 .

[11]  N. Zorev.  Metal cutting mechanics , 1966 .

[12]  G. R. Ponkshe.  A New Explanation of the Phenomenon of Chip Curling During Machining , 1967 .

[13]  F. A. McClintock,et al.  A Criterion for Ductile Fracture by the Growth of Holes , 1968 .

[14]  R. Connolly,et al.  The mechanics of continuous chip formation in orthogonal cutting , 1968 .

[15]  D. M. Tracey,et al.  On the ductile enlargement of voids in triaxial stress fields , 1969 .

[16]  M. C. Shaw,et al.  ON DEFORMATION AT LARGE STRAINS , 1970 .

[17]  R. N. Roth,et al.  Slip-Line Field Analysis for Orthogonal Machining Based upon Experimental Flow Fields: , 1972 .

[18]  J. Larsen-Basse,et al.  Effect of Strain-Rate Sensitivity on Scale Phenomena in Chip Formation , 1973 .

[19]  A. Atkins.  Fracture toughness and cutting , 1974 .

[20]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[21]  M. M. Barash,et al.  Closure to “Discussions of ‘The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool’” (1976, ASME J. Eng. Ind., 98, pp. 1199–1200) , 1976 .

[22]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[23]  I. Hutchings.  Deformation of metal surfaces by the oblique impact of square plates , 1977 .

[24]  H. Stüwe.  The work necessary to form a ductile fracture surface , 1980 .

[25]  J. T. Black,et al.  The Hammer QSD-Quick Stop Device for High Speed Machining and Rubbing , 1981 .

[26]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[27]  S. Britton.  An Atlas of Metal Damage , 1981 .

[28]  V. Tvergaard.  On localization in ductile materials containing spherical voids , 1982, International Journal of Fracture.

[29]  P. Oxley,et al.  A Mechanics of Machining Approach to Assessing Machinability , 1982 .

[30]  K. Osakada,et al.  Process Modeling of Orthogonal Cutting by the Rigid-Plastic Finite Element Method , 1984 .

[31]  A. Needleman,et al.  Analysis of the cup-cone fracture in a round tensile bar , 1984 .

[32]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[33]  J. Strenkowski,et al.  A Finite Element Model of Orthogonal Metal Cutting , 1985 .

[34]  M. Kanninen,et al.  Advanced Fracture Mechanics , 1986 .

[35]  G. Lawes,et al.  Scanning Electron Microscopy and X-Ray Microanalysis , 1987 .

[36]  N. Moronuki,et al.  Effect of Material Properties on Ultra Precise Cutting Processes , 1988 .

[37]  D. W. Wu,et al.  Comprehensive Dynamic Cutting Force Model and Its Application to Wave-Removing Processes , 1988 .

[38]  R. Komanduri,et al.  Energy dissipation in the ultraprecision machining of copper , 1991 .

[39]  S. Lin,et al.  A Coupled Finite Element Model of Thermo-Elastic-Plastic Large Deformation for Orthogonal Cutting , 1992 .

[40]  Don A. Lucca,et al.  Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining , 1993 .

[41]  A. Bagchi,et al.  Finite Element Simulation of Chip Formation and Comparison with Machining Experiment , 1994 .

[42]  M. Ortiz,et al.  Modelling and simulation of high-speed machining , 1995 .

[43]  William J. Endres,et al.  A dual-mechanism approach to the prediction of machining forces, part 2: Calibration and validation , 1995 .

[44]  Leon M Keer,et al.  Dislocation based fracture mechanics , 1996 .

[45]  J. T. Black,et al.  An Evaluation of Chip Separation Criteria for the FEM Simulation of Machining , 1996 .

[46]  M. C. Shaw.  Principles of Abrasive Processing , 1996 .

[47]  Toshiyuki Obikawa,et al.  Computational machining of titanium alloy : Finite element modeling and a few results , 1996 .

[48]  Toshiyuki Obikawa,et al.  Application of computational machining method to discontinuous chip formation , 1997 .

[49]  D. Benson.  A mixture theory for contact in multi-material Eulerian formulations , 1997 .

[50]  Hans Kurt Tönshoff,et al.  Three-Dimensional Micromachining by Machine Tools , 1997 .

[51]  Shiv Gopal Kapoor,et al.  A Slip-Line Field for Ploughing During Orthogonal Cutting , 1997, Manufacturing Science and Engineering: Volume 2.

[52]  N. Chandrasekaran,et al.  Effect of tool geometry in nanometric cutting: a molecular dynamics simulation approach , 1998 .

[53]  Srinivasan Chandrasekar,et al.  Machining as a Wedge Indentation , 2000 .

[54]  Takahisa Masuzawa,et al.  State of the Art of Micromachining , 2000 .

[55]  Thomas Childs,et al.  Metal Machining: Theory and Applications , 2000 .

[56]  D. Lesuer,et al.  EXPERIMENTAL INVESTIGATIONS OF MATERIAL MODELS FOR TI-6A1-4V TITANIUM AND 2024-T3 ALUMINUM. , 2000 .

[57]  T. Özel,et al.  Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting , 2000 .

[58]  N. Ramakrishnan,et al.  Micro-Structural Analysis of Chip Formation During Orthogonal Machining of Al/SiCp Composites , 2001 .

[59]  S. Chandrasekar,et al.  An Intrinsic Size-Effect in Machining Due to the Strain Gradient , 2001, Manufacturing Engineering.

[60]  T. Marusich.  Effects of Friction and Cutting Speed on Cutting Force , 2001, Manufacturing Engineering.

[61]  G Kay,et al.  Failure Modeling of Titanium-6Al-4V and 2024-T3 Aluminum with the Johnson-Cook Material Model , 2002 .

[62]  T. I. El-Wardany,et al.  PHYSICS-BASED SIMULATION OF HIGH SPEED MACHINING , 2002 .

[63]  A. Nishimura,et al.  Further aspects on J-evaluation demonstrated with EDM notched round bars and double-edged plates between 300 and 7 K , 2002 .

[64]  Anand Ramesh,et al.  Prediction of process-induced microstructural changes and residual stresses in orthogonal hard machining , 2002 .

[65]  William J. Endres,et al.  Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal Machining , 1999, Manufacturing Science and Engineering.

[66]  A. Atkins.  Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems , 2003 .

[67]  N. Fang,et al.  Slip-line modeling of machining with a rounded-edge tool—Part II: analysis of the size effect and the shear strain-rate , 2003 .

[68]  Kornel Ehmann,et al.  The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science , 2004 .

[69]  Olivier Dalverny,et al.  2D AND 3D NUMERICAL MODELS OF METAL CUTTING WITH DAMAGE EFFECTS. , 2004 .

[70]  Yuebin Guo,et al.  A FEM study on mechanisms of discontinuous chip formation in hard machining , 2004 .

[71]  S. Melkote,et al.  On the Size-Effect in Micro-Cutting at Low and High Rake Angles , 2004 .

[72]  Tomasz Wierzbicki,et al.  A Comparative Study on Various Ductile Crack Formation Criteria , 2004 .

[73]  Shreyes N. Melkote,et al.  An Explanation for the Size-Effect in Machining Using Strain Gradient Plasticity , 2004 .

[74]  Anthony G. Atkins,et al.  Toughness and cutting: a new way of simultaneously determining ductile fracture toughness and strength , 2005 .

[75]  Kai Liu,et al.  Process Modeling of Micro-Cutting Including Strain Gradient Effects , 2005 .

[76]  T. Wierzbicki,et al.  Calibration and evaluation of seven fracture models , 2005 .

[77]  Shreyes N. Melkote,et al.  The Constant Force Component due to Material Separation and Its Contribution to the Size Effect in Specific Cutting Energy , 2006 .

[78]  Muhammad Ekhlasur Rahman,et al.  Experimental study of micro- and nano-scale cutting of aluminum 7075-T6 , 2006 .

[79]  S. Rhim,et al.  Prediction of serrated chip formation in metal cutting process with new flow stress model for AISI 1045 steel , 2006 .

[80]  A. Atkins,et al.  Toughness and Oblique Metalcutting , 2006 .

[81]  S. Melkote,et al.  Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting , 2006 .