Design and optical characterization of a large continuous phase plate for Laser Integration Line and Laser Megajoule facilities.

For development of the French Laser Integration Line and the Laser Megajoule, we describe the design and the control of a first 383 mm x 398 mm continuous phase-plate prototype. Extensively used in laser fusion facilities for beam smoothing, this optical component was manufactured by deep etching onto a fused-silica substrate, which led to a phase plate engraved directly onto fused silica, with which good optical performance could be achieved. We demonstrate good agreement between the desired simulated component and the manufactured component in terms of focal spot shape. This demonstration was performed by both interferometric and photometric measurements.

[1]  R. Gerchberg.  A practical algorithm for the determination of phase from image and diffraction plane pictures , 1972 .

[2]  J. R. Morris,et al.  Time-dependent propagation of high energy laser beams through the atmosphere , 1976 .

[3]  Kunioki Mima,et al.  Random Phasing of High-Power Lasers for Uniform Target Acceleration and Plasma-Instability Suppression , 1984 .

[4]  Andrew J. Schmitt,et al.  Theory of induced spatial incoherence , 1987 .

[5]  Samuel A. Letzring,et al.  Improved laser‐beam uniformity using the angular dispersion of frequency‐modulated light , 1989 .

[6]  Bruce W. Woods,et al.  Large-aperture (80-cm diameter) phase plates for beam smoothing on Nova , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[7]  A. J. Morgan,et al.  Random phase plates for beam smoothing on the Nova laser. , 1993, Applied optics.

[8]  Katsuyuki Okada,et al.  Measurement of large plane surface shapes by connecting small-aperture interferograms , 1994 .

[9]  H T Powell,et al.  Kinoform phase plates for focal plane irradiance profile control. , 1994, Optics letters.

[10]  Ian M. Thomas,et al.  Preparation of random-phase plates for laser-beam smoothing , 1995, Laser Damage.

[11]  Y. Lin,et al.  Distributed phase plates for super-Gaussian focal-plane irradiance profiles. , 1995, Optics letters.

[12]  Andre Roussel,et al.  Using first principles in the specifying of optics for large high-power lasers (I): application to the Megajoule Laser (LMJ) , 1996, Optical Systems Design.

[13]  Michel L. Andre,et al.  Status of the LMJ project , 1997, Other Conferences.

[14]  W. Howard Lowdermilk,et al.  Status of the National Ignition Facility project , 1997, Other Conferences.

[15]  Michael Bray,et al.  Stitching interferometry: side effects and PSD , 1999, Optics + Photonics.

[16]  Alain Adolf,et al.  Final optics design for the megajoule laser , 1999, Other Conferences.

[17]  Michael Bray.  Stitching interferometer for large optics: recent developments of a system , 1999, Other Conferences.

[18]  Michael Bray.  Stitching interferometry: how and why it works , 1999, Optical Systems Design.

[19]  Pierre Garrec,et al.  Large transmission 1ω and 3ω gratings for the LIL laser , 2001, SPIE Optics + Photonics.

[20]  Francis Bonnemason,et al.  Development of large-aperture 1-ω and 3-ω gratings for the LIL laser , 2002, Other Conferences.