Eco-Sim: A Parametric Tool to Evaluate the Environmental and Economic Feasibility of Decentralized Energy Systems

Due to climate change and the need to decrease the carbon footprint of urban areas, there is an increasing pressure to integrate renewable energy and other components in urban energy systems. Most of the models or available tools do not provide both an economic and environmental assessment of the energy systems and thus lead to the design of systems that are sub-optimal. A flexible and modular simulation tool, Eco-Sim, is thus developed in the current study to conduct a comprehensive techno-economic and environmental assessment of a distributed energy system considering different configuration scenarios. Subsequently, an intermodel comparison is conducted with the Hybrid Optimization Model for Electric Renewable (HOMER) Pro as well as with a state-of-the-art industrial tool. Eco-Sim is then extended by including the heating demand, thermal conversion (by using heat pumps and solar thermal) methods and thermal storage. A parametric analysis is conducted by considering different capacities of solar photovoltaics (PV), solar thermal panels and energy storage technologies. The levelized cost of electricity, the autonomy level and the CO 2 emissions are used as the key performance indicators. Based on the analysis of a study case conducted in a neighbourhood in Geneva, Switzerland, the study reveals that, with the present market prices for batteries and seasonal changes in solar energy potential, the combination of solar PV with battery storage doesn’t bring a significant autonomy to the system and increases the CO 2 emissions of the system. However, the integration of thermal storage and solar thermal generation is shown to considerably increase the autonomy of the neighbourhood. Finally, multiple scenarios are also run in order to evaluate the sensitivity of economic parameters on the performance indicators of the system. Under the assumptions of the model, to foster investments in solar PV and battery installations, falling installation costs or stronger policies in favor of renewable energy seem necessary for the future.

[1]  Christos N. Markides,et al.  Hybrid PV and solar-thermal systems for domestic heat and power provision in the UK: Techno-economic considerations , 2016 .

[2]  François Maréchal,et al.  Optimisation of the heating demand of the EPFL campus with an MIP approach , 2015 .

[3]  Curran Crawford,et al.  Implications of temporal resolution for modeling renewables-based power systems , 2012 .

[4]  Benedikt Battke,et al.  A review and probabilistic model of lifecycle costs of stationary batteries in multiple applications , 2013 .

[5]  Jean-Louis Scartezzini,et al.  Improving the energy sustainability of a Swiss village through building renovation and renewable energy integration , 2018 .

[6]  A. T. D. Perera,et al.  Optimal design of a grid connected hybrid electrical energy system using evolutionary computation , 2013, 2013 IEEE 8th International Conference on Industrial and Information Systems.

[7]  Euan Phimister,et al.  Modelling the impact of market imperfections on farm household investment in stand-alone solar PV systems , 2014, World Development.

[8]  J. Widén,et al.  Impacts of different data averaging times on statistical analysis of distributed domestic photovoltaic systems , 2010 .

[9]  J. Scartezzini,et al.  A New Framework to Evaluate Urban Design Using Urban Microclimatic Modeling in Future Climatic Conditions , 2018 .

[10]  Girish Kumar Singh,et al.  Solar power generation by PV (photovoltaic) technology: A review , 2013 .

[11]  J. Scartezzini,et al.  Quantifying the impact of urban climate by extending the boundaries of urban energy system modeling , 2018, Applied Energy.

[12]  R. Zilles,et al.  Energy Payback Time and CO 2 Emissions of 1.2 kWp Photovoltaic Roof-Top System in Brazil , 2013 .

[13]  Andreas Poullikkas,et al.  Overview of current and future energy storage technologies for electric power applications , 2009 .

[14]  Jan Carmeliet,et al.  Towards an energy sustainable community: An energy system analysis for a village in Switzerland , 2014 .

[15]  A. Wright,et al.  The nature of domestic electricity-loads and effects of time averaging on statistics and on-site generation calculations , 2007 .

[16]  Alberto de la Calle,et al.  Dynamic modelling of a continuous hydrogen production plant based on a CeO2 thermochemical cycle , 2018 .

[17]  Yen Chean Soo Too,et al.  Impact of ambient temperature on supercritical CO2 recompression Brayton cycle in arid locations: Finding the optimal design conditions , 2018, Energy.

[18]  Jean-Louis Scartezzini,et al.  Design Optimization of Electrical Hubs Using Hybrid Evolutionary Algorithm , 2016 .

[19]  Xiaoze Du,et al.  Dynamic simulation of steam generation system in solar tower power plant , 2019, Renewable Energy.

[20]  Yekang Ko,et al.  Socio-technical evolution of Decentralized Energy Systems: A critical review and implications for urban planning and policy , 2016 .

[21]  Teuku Meurah Indra Mahlia,et al.  Techno-economic analysis of a wind–solar hybrid renewable energy system with rainwater collection feature for urban high-rise application , 2011 .

[22]  Tobias S. Schmidt,et al.  Shedding light on solar technologies—A techno-economic assessment and its policy implications , 2011 .

[23]  Maastricht.  Heat pumps for energy efficiency and environmental progress , 1993 .

[24]  Alicia Bayon,et al.  Annual performance of a thermochemical solar syngas production plant based on non-stoichiometric CeO2 , 2019, International Journal of Hydrogen Energy.

[25]  Wei Xu,et al.  Application and suitability analysis of the key technologies in nearly zero energy buildings in China , 2019, Renewable and Sustainable Energy Reviews.

[26]  Brian Vad Mathiesen,et al.  A review of computer tools for analysing the integration of renewable energy into various energy systems , 2010 .

[27]  John Pye,et al.  SolarTherm: A flexible Modelica-based simulator for CSP systems , 2017, AIP Conference Proceedings.

[28]  Adam Hawkes,et al.  Impacts of temporal precision in optimisation modelling of micro-combined heat and power , 2005 .

[29]  T. Schmidt,et al.  The economic viability of battery storage for residential solar photovoltaic systems – A review and a simulation model , 2014 .

[30]  Daniel Nilsson,et al.  Photovoltaic self-consumption in buildings : A review , 2015 .

[31]  Peter Lund,et al.  Review of energy system flexibility measures to enable high levels of variable renewable electricity , 2015 .

[32]  V. P. C. Dassanayake,et al.  Designing standalone hybrid energy systems minimizing initial investment, life cycle cost and pollutant emission , 2013 .

[33]  Jean-Louis Scartezzini,et al.  Evaluating the need for energy storage to enhance autonomy of neighborhoods , 2017 .

[34]  Ludger Fischer,et al.  A review and evaluation of thermal insulation materials and methods for thermal energy storage systems , 2019, Renewable and Sustainable Energy Reviews.

[35]  Peter Hall,et al.  Energy-storage technologies and electricity generation , 2008 .

[36]  Paul Denholm,et al.  Role of Energy Storage with Renewable Electricity Generation , 2010 .

[37]  Jean-Louis Scartezzini,et al.  Electrical hubs: An effective way to integrate non-dispatchable renewable energy sources with minimum impact to the grid , 2017 .

[38]  Qian Wang,et al.  Maximizing thermal performance of building ventilation using geothermal and wastewater heat , 2019, Resources, Conservation and Recycling.

[39]  Jean-Louis Scartezzini,et al.  Locating Multi Energy Systems for A Neighborhood In Geneva Using K-Means Clustering , 2017 .

[40]  Massimiliano Manfren,et al.  Paradigm shift in urban energy systems through distributed generation: Methods and models , 2011 .

[41]  Sri Lanka,et al.  A hybrid tool to combine multi-objective optimization and multi-criterion decision making in designing standalone hybrid energy systems , 2013 .

[42]  Sunliang Cao,et al.  Impact of simulation time-resolution on the matching of PV production and household electric demand , 2014 .

[43]  D. Sauer,et al.  Operation conditions of batteries in PV applications , 2004 .

[44]  D. Assouline,et al.  Quantifying rooftop photovoltaic solar energy potential: A machine learning approach , 2017 .

[45]  A.T.D. Perera,et al.  A multi criterion analysis for renewable energy integration process of a standalone hybrid energy system with internal combustion generator , 2015 .

[46]  Jean-Louis Scartezzini,et al.  Optimum design and control of grid integrated electrical hubs considering lifecycle cost and emission , 2016, 2016 IEEE International Energy Conference (ENERGYCON).

[47]  H. F. Kaan,et al.  Planning for urban-scale photovoltaic systems , 2009 .

[48]  Ralf Dott,et al.  Combining heat pumps with solar energy for domestic hot water production , 2012 .

[49]  G. Andersson,et al.  Optimal Power Flow of Multiple Energy Carriers , 2007, IEEE Transactions on Power Systems.

[50]  Roberto Dones,et al.  Life Cycle Assessment for Emerging Technologies: Case Studies for Photovoltaic and Wind Power (11 pp) , 2005 .

[51]  Hussein Ibrahim,et al.  Techno-Economic Analysis of Different Energy Storage Technologies , 2013 .

[52]  Varun,et al.  Life cycle assessment of solar PV based electricity generation systems: A review , 2010 .

[53]  Jianfei Dong,et al.  Modeling and analyses of energy performances of photovoltaic greenhouses with sun-tracking functionality , 2019, Applied Energy.

[54]  Bruno Gaiddon,et al.  Photovoltaics in the urban environment : lessons learnt from large-scale projects , 2009 .

[55]  Benedikt Battke,et al.  Use cases for stationary battery technologies: A review of the literature and existing projects , 2016 .

[56]  Jean-Louis Scartezzini,et al.  An integrated approach to design site specific distributed electrical hubs combining optimization, multi-criterion assessment and decision making , 2017 .

[57]  Christoph Maurer,et al.  Strategic Research Priorities for Solar Thermal Technology , 2013 .

[58]  Adrian Ilinca,et al.  Energy storage systems—Characteristics and comparisons , 2008 .

[59]  Darren Robinson.  Computer Modelling for Sustainable Urban Design , 2011 .

[60]  M. P. G. Sirimanna,et al.  A techno-economic analysis for an integrated solar PV/T system with thermal and electrical storage — Case study , 2015, 2015 Moratuwa Engineering Research Conference (MERCon).

[61]  E. Alsema.  Energy pay‐back time and CO2 emissions of PV systems , 2000 .

[62]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[63]  Stephan Pfister,et al.  LCA of key technologies for future electricity supply—68th LCA forum, Swiss Federal Institute of Technology, Zurich, 16 April, 2018 , 2018, The International Journal of Life Cycle Assessment.

[64]  Anjali Awasthi,et al.  Techno-economic feasibility analysis of a solar PV grid-connected system with different tracking using HOMER software , 2017, 2017 IEEE International Conference on Smart Energy Grid Engineering (SEGE).

[65]  Guglielmina Mutani,et al.  A new clustering and visualization method to evaluate urban heat energy planning scenarios , 2019, Cities.

[66]  J. Tester,et al.  Sustainable Energy: Choosing Among Options , 2005 .

[67]  Sean D Dessureault,et al.  Justification techniques for computer integrated mining , 2004 .