Mathematical Model of the Criterion of Optimization by Compensation for Designing Commercial Bottles with Lateral Surfaces of Revolution and a Straight Section along Its Silhouette

In this article, the mathematical foundations of the so called Criterion of Optimization by Compensation for designing commercial bottles with a straight section along its silhouette and with lateral surfaces of revolution is presented. Such mathematical model uses as main tools, Lagrange polynomial interpolation and Newton’s Method for Nonlinear Systems being first necessary to formulate and demonstrate a theorem. It was redesigned and manufactured a bottle of a half-liter of Fanta soda of the well-known Coca Cola Company, which uses 18.86% more material that such criterion establishes. It was expected that the redesigned bottle use 4.91% more of material with respect to what is established by the Criterion of Optimization by Compensation. However, it was reported a 13% of mistake due to important limitations that must be overcome.

[1]  Karl Hain,et al.  SIMULATION OF THE FILLING OF POLYETHYLENE- TEREPHTHALATE- BOTTLES (PET) WITH A VOLUMETRIC SWIRL CHAMBER VALVE (VODM 40355) ON THE BASIS OF CALCULATION MODELS AND EXPERIMENTS , 2009 .

[2]  Koetsu Yamazaki,et al.  Optimization of the crushing characteristics of triangulated aluminum beverage cans , 2004 .

[3]  Cecil Armstrong,et al.  Simulation of the stretch blow molding process of PET bottles , 1998 .

[4]  M. E. Ryan,et al.  Experimental study and finite element analysis of the injection blow molding process , 1993 .

[5]  Christian Windeck,et al.  Simulative design and process optimization of the two-stage stretch-blow molding process , 2015 .

[6]  Koetsu Yamazaki,et al.  Application of structure optimization technique to aluminum beverage bottle design , 2005 .

[7]  D A Pierre,et al.  Optimization Theory with Applications , 1986 .

[8]  Yong Sheng Wang,et al.  Structural Optimization and Lightweight Design of PET Bottle Based on ABAQUS , 2011 .

[9]  Alberto,et al.  Design Optimization and Weight Reduction of 500 mL CSD PET Bottle through FEM Simulations , 2011 .

[10]  F. Daver,et al.  Optimization of poly(ethylene terephthalate) bottles via numerical modeling: A statistical design of experiment approach , 2009 .

[11]  A Suitable Mathematical Model of PET for FEA Drop-Test Analysis , 2010 .

[12]  Robert DiRaddo,et al.  Preform shape and operating condition optimization for the stretch blow molding process , 2007 .

[13]  Koetsu Yamazaki,et al.  Multiobjective optimization of a two-piece aluminum beverage bottle considering tactile sensation of heat and embossing formability , 2006 .

[14]  Syed H. Masood,et al.  Development of collapsible PET water fountain bottles , 2005 .

[15]  Kyung K. Choi,et al.  Numerical method for shape optimization using T-spline based isogeometric method , 2010 .

[16]  Philippe Moreau,et al.  Numerical optimization of a new robotized glass blowing process , 2004, Engineering with Computers.