Use of supercritical CO2 as a dispersing agent in the preparation of a polymer‐layered silicate nanocomposite

The usefulness of supercritical CO2 (scCO2) in the processing of thermoplastic olefin (TPO) nanocomposites was investigated using a simple extensional flow mixing device. An organoclay (Cloisite® 20A), a maleated polypropylene (Polybond® 3200), and a TPO polymer were selected for this study. The three components were combined in different manners to evaluate how scCO2 influenced the microstructure of a final nanocomposite prepared by different mixing orders of the formulation components. The organoclay was examined in its as-supplied state as well as after being conditioned under scCO2. Analyses of the nanocomposites by X-ray diffraction, transmission electron microscopy, and parallel plate rheology techniques showed that inclusion of scCO2 during melt compounding significantly contributed to disrupting the crystalline order in the structure of the original organoclay. However, the order by which the formulation components are combined under scCO2 was important to clay dispersion. It was shown that making use of the proper combination order led to an improvement in the modulus of the resulting nanocomposites as measured by rheology. POLYM. COMPOS., 2015. © 2015 Society of Plastics Engineers

[1]  M. Thompson,et al.  Evaluating different alkyl ammonium modified organoclays in preparation of TPO nanocomposites with supercritical CO2 , 2014 .

[2]  E. Cassel,et al.  Effect of montmorillonite treatment with supercritical CO2 on the morphology and properties of polypropylene nanocomposites , 2014, Polymer Science Series A.

[3]  Jun Liu,et al.  Supercritical CO2 as an exfoliating aid for nanocomposite preparation: Comparison of different processing methodologies , 2012 .

[4]  Robert B. Moore,et al.  The preparation of nano-clay/polypropylene composite materials with improved properties using supercritical carbon dioxide and a sequential mixing technique , 2012 .

[5]  C. Jérôme,et al.  Organomodification of montmorillonite in supercritical carbon dioxide , 2011 .

[6]  M. Balogh,et al.  Influence of supercritical CO2 on the interactions between maleated polypropylene and alkyl‐ammonium organoclay , 2011 .

[7]  S. Hatzikiriakos,et al.  A novel miniature mixing device for polymeric blends and nanocomposites , 2009 .

[8]  S. Horsch,et al.  Role of polymer-clay interactions and nano-clay dispersion on the viscoelastic response of supercritical CO2 dispersed polyvinylmethylether (PVME)-Clay nanocomposites , 2009 .

[9]  Andrés Aguado,et al.  Structures and stabilities of Al(n) (+), Al(n), and Al(n) (-) (n=13-34) clusters. , 2009, The Journal of chemical physics.

[10]  M. Balogh,et al.  In situ x-ray diffraction studies of alkyl quaternary ammonium montmorillonite in a CO(2) environment. , 2009, The Journal of chemical physics.

[11]  M. Thompson,et al.  Interaction of supercritical CO2 with alkyl-ammonium organoclays: changes in morphology. , 2008, Journal of colloid and interface science.

[12]  L. Robeson,et al.  Polymer nanotechnology: Nanocomposites , 2008 .

[13]  Hanxiong Huang,et al.  Dynamic Rheology and Microstructure of Polypropylene/Clay Nanocomposites Prepared Under Sc-CO2 by Melt Compounding , 2008 .

[14]  A. Galeski,et al.  Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA , 2007 .

[15]  J. Darr,et al.  Preparation of polypropylene/sepiolite nanocomposites using supercritical CO2 assisted mixing , 2007 .

[16]  D. Baird,et al.  An improved technique for exfoliating and dispersing nanoclay particles into polymer matrices using supercritical carbon dioxide , 2007 .

[17]  J. Oberhauser,et al.  Processing of polypropylene–clay nanocomposites: Single‐screw extrusion with in‐line supercritical carbon dioxide feed versus twin‐screw extrusion , 2007 .

[18]  Esin Gulari,et al.  Supercritical CO2 dispersion of nano-clays and clay/polymer nanocomposites , 2006 .

[19]  L. Utracki,et al.  Extensional flow mixer for polymer nanocomposites , 2006 .

[20]  Bin Yang,et al.  Improvement of a gram-scale mixer for polymer blending , 2006 .

[21]  Darren J. Martin,et al.  Morphology and properties of thermoplastic polyurethane nanocomposites incorporating hydrophilic layered silicates , 2004 .

[22]  R. Krishnamoorti,et al.  Disorientation kinetics of aligned polymer layered silicate nanocomposites , 2003 .

[23]  R. Bharadwaj,et al.  Structure–property relationships in cross-linked polyester–clay nanocomposites , 2002 .

[24]  Donald R Paul,et al.  Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites , 2001 .

[25]  J. S. Shelley,et al.  Reinforcement and environmental degradation of nylon-6/clay nanocomposites , 2001 .

[26]  Makoto Kato,et al.  Polyolefin-clay hybrids based on modified polyolefins and organophilic clay , 2000 .