Electrical properties of LaAlO3/Si and Sr0.8Bi2.2Ta2O9/LaAlO3/Si structures

Lanthanum aluminate (LaAlO3) films were deposited on Si(100) substrates by evaporating single-crystal pellets in vacuum using an electron-beam gun. Then, they were annealed in N2 ambience at 700 °C for 10 min using an electric furnace. X-ray diffraction analysis showed that the LaAlO3 films were amorphous even after the annealing process. No hysteretic characteristics were observed in the capacitance–voltage (C–V) measurement and the dielectric constant of the LaAlO3 films was estimated to be 21–25. It was also found that the leakage current density decreased by about three orders of magnitude after the annealing process. On these films, Sr0.8Bi2.2Ta2O9 films with 210 nm thickness were deposited by a sol–gel method. All samples annealed in O2 atmosphere at temperatures ranging from 650 to 750 °C showed hysteretic C–V characteristics, and the memory window width in the sample annealed at 750 °C for 30 min was about 3.0 V for a voltage sweep of ±10 V. It was also found that the capacitance values biased in ...