Fast Analytic Simulation for Multi-Laser Heating of Sheet Metal in GPU

Interactive multi-beam laser machining simulation is crucial in the context of tool path planning and optimization of laser machining parameters. Current simulation approaches for heat transfer analysis (1) rely on numerical Finite Element methods (or any of its variants), non-suitable for interactive applications; and (2) require the multiple laser beams to be completely synchronized in trajectories, parameters and time frames. To overcome this limitation, this manuscript presents an algorithm for interactive simulation of the transient temperature field on the sheet metal. Contrary to standard numerical methods, our algorithm is based on an analytic solution in the frequency domain, allowing arbitrary time/space discretizations without loss of precision and non-monotonic retrieval of the temperature history. In addition, the method allows complete asynchronous laser beams with independent trajectories, parameters and time frames. Our implementation in a GPU device allows simulations at interactive rates even for a large amount of simultaneous laser beams. The presented method is already integrated into an interactive simulation environment for sheet cutting. Ongoing work addresses thermal stress coupling and laser ablation.

[1]  Bekir Sami Yilbas,et al.  Laser cutting of rectangular geometry into alumina tiles , 2014 .

[2]  Oscar Ruiz-Salguero,et al.  Appraisal of open software for finite element simulation of 2D metal sheet laser cut , 2017 .

[3]  M. Kim.  Transient evaporative laser-cutting with boundary element method , 2000 .

[4]  Bekir Sami Yilbas,et al.  MULTI-BEAM LASER HEATING OF STEEL: TEMPERATURE AND THERMAL STRESS ANALYSIS , 2012 .

[5]  Hao-Jie Jiang,et al.  Effect of laser processing on three dimensional thermodynamic analysis for HSLA rectangular steel plates , 2015 .

[6]  A. Benzaoui,et al.  Numerical Simulation of Transient Three-Dimensional Temperature and Kerf Formation in Laser Fusion Cutting , 2015 .

[7]  Bekir Sami Yilbas,et al.  Laser multi-beam heating of moving steel sheet: Thermal stress analysis , 2013 .

[8]  K. Osakada,et al.  The manufacturing of hard tools from metallic powders by selective laser melting , 2001 .

[9]  Petri Laakso,et al.  Adaptive multibeam laser cutting of thin steel sheets with fiber laser using spatial light modulator , 2014 .

[10]  Jerzy Winczek,et al.  Analytical solution to transient temperature field in a half-infinite body caused by moving volumetric heat source , 2010 .

[11]  M. Modest,et al.  Evaporative cutting of a semi-infinite body with a moving CW laser , 1986 .

[12]  B. Li,et al.  A thermal stress and failure model for laser cutting and forming operations , 2004 .

[13]  M. Modest.  Laser through‐cutting and drilling models for ablating/decomposing materials , 1997 .

[14]  Aitor Moreno,et al.  Real-time part detection in a virtually machined sheet metal defined as a set of disjoint regions , 2016, Int. J. Comput. Integr. Manuf..

[15]  Bekir Sami Yilbas,et al.  Laser bending of metal sheet and thermal stress analysis , 2014 .

[16]  H. Attia,et al.  Integrated Process of Laser-Assisted Machining and Laser Surface Heat Treatment , 2013 .

[17]  Konrad Wegener,et al.  Multi-Beam Strategies for the Optimization of the Selective Laser Melting Process , 2016 .

[18]  Klaus Zimmer,et al.  Analytical solution of the laser-induced temperature distribution across internal material interfaces , 2009 .

[19]  Bekir Sami Yilbas,et al.  Laser cutting of rectangular geometry into aluminum alloy: Effect of cut sizes on thermal stress field , 2014 .

[20]  Bekir Sami Yilbas,et al.  Laser cutting of triangular blanks from thick aluminum foam plate: Thermal stress analysis and morphology , 2014 .

[21]  R. Abdul-Rahman,et al.  Finite element analysis of laser inert gas cutting on Inconel 718 , 2012 .

[22]  S. S. Akhtar.  Laser cutting of thick-section circular blanks: thermal stress prediction and microstructural analysis , 2014 .

[23]  Suck-Joo Na,et al.  A study on torch path planning in laser cutting processes part 1: Calculation of heat flow in contour laser beam cutting , 1999 .

[24]  Christof Büskens,et al.  OPTILAS: Numerical Optimization as a Key Tool for the Improvement of Advanced Multi-Beam Laser Welding Techniques , 2005 .

[25]  D. Gu,et al.  Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments , 2015 .

[26]  Aitor Moreno,et al.  Accelerated Thermal Simulation for Three-Dimensional Interactive Optimization of Computer Numeric Control Sheet Metal Laser Cutting , 2018 .

[27]  K. S. Hansen,et al.  Multibeam fiber laser cutting , 2009 .

[28]  Wenji Xu,et al.  A numerical simulation of temperature field in plasma-arc forming of sheet metal , 2005 .

[29]  B. Yilbas,et al.  Laser Cutting of Aluminum Foam: Experimental and Model Studies , 2013 .

[30]  Michael P Sealy,et al.  Finite element simulation and experimental validation of pulsed laser cutting of nitinol , 2015 .

[31]  D. Mynors,et al.  A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing , 2009 .

[32]  Konrad Wegener,et al.  Computational Investigation of Synchronized Multibeam Strategies for the Selective Laser Melting Process , 2016 .

[33]  M. Modest.  Three-dimensional, transient model for laser machining of ablating/decomposing materials , 1996 .

[34]  Álvaro Segura,et al.  Using 2D Contours to Model Metal Sheets in Industrial Machining Processes , 2014 .

[35]  M. Kim.  Transient evaporative laser cutting with moving laser by boundary element method , 2004 .

[36]  A. F. M. Arif,et al.  Laser Cutting of Rectangular Blanks in Thick Sheet Steel: Effect of Cutting Speed on Thermal Stresses , 2010 .