Real-Time Estimation of Glenohumeral Joint Rotation Center With Cable-Driven Arm Exoskeleton (CAREX)-A Cable-Based Arm Exoskeleton.

In the past few years, the authors have proposed several prototypes of a Cable-driven upper ARm EXoskeleton (CAREX) for arm rehabilitation. One of the assumptions of CAREX was that the glenohumeral joint rotation center (GH-c) remains stationary in the inertial frame during motion, which leads to inaccuracy in the kinematic model and may hamper training performance. In this paper, we propose a novel approach to estimate GH-c using measurements of shoulder joint angles and cable lengths. This helps in locating the GH-c center appropriately within the kinematic model. As a result, more accurate kinematic model can be used to improve the training of human users. An estimation algorithm is presented to compute the GH-c in real-time. The algorithm was implemented on the latest prototype of CAREX. Simulations and preliminary experimental results are presented to validate the proposed GH-c estimation method.

[1]  Sunil Kumar Agrawal,et al.  Design of a Cable-Driven Arm Exoskeleton (CAREX) for Neural Rehabilitation , 2012, IEEE Transactions on Robotics.

[2]  Antonio Frisoli,et al.  A new force-feedback arm exoskeleton for haptic interaction in virtual environments , 2005, First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. World Haptics Conference.

[3]  S.J. Ball,et al.  MEDARM: a rehabilitation robot with 5DOF at the shoulder complex , 2007, 2007 IEEE/ASME international conference on advanced intelligent mechatronics.

[4]  N. Hogan,et al.  Robot-aided neurorehabilitation. , 1998, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[5]  Elizabeth A. Brackbill,et al.  Dynamics and control of a 4-dof wearable cable-driven upper arm exoskeleton , 2009, 2009 IEEE International Conference on Robotics and Automation.

[6]  Robert Riener,et al.  ARMin III --arm therapy exoskeleton with an ergonomic shoulder actuation , 2009 .

[7]  Sunil Kumar Agrawal,et al.  Wearable cable-driven upper arm exoskeleton - motion with transmitted joint force and moment minimization , 2010, 2010 IEEE International Conference on Robotics and Automation.

[8]  H. Krebs,et al.  Effects of Robot-Assisted Therapy on Upper Limb Recovery After Stroke: A Systematic Review , 2008, Neurorehabilitation and neural repair.

[9]  David J. Reinkensmeyer,et al.  Robotic assist devices for bimanual physical therapy: preliminary experiments , 1993 .

[10]  Sunil K. Agrawal,et al.  Design and Optimization of a Cable Driven Upper Arm Exoskeleton , 2009 .

[11]  Maarten J. IJzerman,et al.  Systematic review of the effect of robot-aided therapy on recovery of the hemiparetic arm after stroke. , 2006, Journal of rehabilitation research and development.

[12]  Frans C. T. van der Helm,et al.  Self-Aligning Exoskeleton Axes Through Decoupling of Joint Rotations and Translations , 2009, IEEE Transactions on Robotics.

[13]  F.C.T. van der Helm,et al.  Kinematic Design to Improve Ergonomics in Human Machine Interaction , 2006, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[14]  Sunil Kumar Agrawal,et al.  A cable driven upper arm exoskeleton for upper extremity rehabilitation , 2011, 2011 IEEE International Conference on Robotics and Automation.

[15]  C. Carignan,et al.  Design of an arm exoskeleton with scapula motion for shoulder rehabilitation , 2005, ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005..

[16]  J.C. Perry,et al.  Upper-Limb Powered Exoskeleton Design , 2007, IEEE/ASME Transactions on Mechatronics.

[17]  Bryan Buchholz,et al.  ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion--Part II: shoulder, elbow, wrist and hand. , 2005, Journal of biomechanics.