A low profile electronically-steerable artificial-impedance-surface antenna

A Ku-band, electronically-steerable, artificial-impedance-surface antenna (AISA) was designed, fabricated and measured. It is capable of scanning in elevation from -70° to 80° with gain variation of less than 5 dB. The antenna operates by launching a surface wave along a surface-wave waveguide (SWG) whose impedance elements are rectangular patches with electrically tunable capacitors between them. The radiation beam is scanned in elevation by applying voltages to the varactors to change the SWG's impedance pattern. Azimuthal scanning can be accomplished with a linear array of SWGs whose relative radiation phases are controlled with variations in the impedance patterns.

[1]  Amit M. Patel,et al.  A Printed Leaky-Wave Antenna Based on a Sinusoidally-Modulated Reactance Surface , 2011, IEEE Transactions on Antennas and Propagation.

[2]  D. J. Gregoire,et al.  Surface-Wave Waveguides , 2011, IEEE Antennas and Wireless Propagation Letters.

[3]  T. Itoh,et al.  Dual-Band Composite Right/Left-Handed (CRLH) Phased-Array Antenna , 2012, IEEE Antennas and Wireless Propagation Letters.

[4]  J. S. Colburn,et al.  Adaptive artificial impedance surface conformal antennas , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[5]  D. Sievenpiper,et al.  Forward and backward leaky wave radiation with large effective aperture from an electronically tunable textured surface , 2005, IEEE Transactions on Antennas and Propagation.

[6]  D. Sievenpiper,et al.  Scalar and Tensor Holographic Artificial Impedance Surfaces , 2010, IEEE Transactions on Antennas and Propagation.