Harsh service environment effects on the microstructure and mechanical properties of Sn–Ag–Cu-1 wt% nano-Al solder alloy

This paper investigates the electrical and mechanical performances of eutectic Sn-3Ag-0.5Cu (wt%) solder with the addition of Al nanoparticles. The study revealed that the elastic moduli, electrical resistivity and damping properties of such solder alloy were improved. Further, interfacial reaction phenomena on Au/Ni-plated Cu pad ball grid array substrate during isothermal aging and thermal cycle was evaluated in terms of the formation and growth kinetics of intermetallic compound (IMC) layer. A structural analysis confirmed that at their interfaces a ternary (Cu, Ni)-Sn IMC layer was adhered at the substrate surface. The thickness of this IMC layer was increased with increasing the duration of the isothermal aging and thermal cycle without any defects. In addition, the formation of Ag3Sn, Cu6Sn5, Sn–Al–Ag and AuSn4 IMC phases were evenly distributed in the solder matrix which acts as the second phase reinforcement. The measured shear strength and microhardness indicated that the exposure of the solder joints to the thermal cycles make the joints degraded faster than the situation in isothermal aging.

[1]  Manoj Gupta,et al.  High Strength Lead‐Free Composite Solder Materials using Nano Al2O3 as Reinforcement , 2005 .

[2]  Asit Kumar Gain,et al.  Microstructure, mechanical and electrical performances of zirconia nanoparticles-doped tin-silver-copper solder alloys , 2016, Journal of Materials Science: Materials in Electronics.

[3]  Y. C. Chan,et al.  Microstructure, kinetic analysis and hardness of Sn–Ag–Cu–1 wt% nano-ZrO2 composite solder on OSP-Cu pads , 2011 .

[4]  Cemal Basaran,et al.  Influence of Thermomigration on Lead-Free Solder Joint Mechanical Properties , 2009 .

[5]  Y. C. Chan,et al.  Microstructure, elastic modulus and shear strength of alumina (Al2O3) nanoparticles-doped tin–silver–copper (Sn–Ag–Cu) solders on copper (Cu) and gold/nickel (Au/Ni)-plated Cu substrates , 2015, Journal of Materials Science: Materials in Electronics.

[6]  Y. C. Chan,et al.  Effect of additions of ZrO2 nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads , 2011, Microelectron. Reliab..

[7]  Tadashi Ariga,et al.  Physical properties of Sn58Bi–xNi lead-free solder and its interfacial reaction with copper substrate , 2015 .

[8]  Hsiang-Yao Hsiao,et al.  Thermomigration in Pb-free SnAg solder joint under alternating current stressing , 2009 .

[9]  S. Delsante,et al.  Synthesis and melting behaviour of Bi, Sn and Sn–Bi nanostructured alloy , 2015 .

[10]  K. Suganuma.  Advances in lead-free electronics soldering , 2001 .

[11]  Guoqiang Li,et al.  Influence of TiO2 nanoparticles on IMC growth in Sn–3.0Ag–0.5Cu–xTiO2 solder joints in reflow process , 2013 .

[12]  Winco K. C. Yung,et al.  Influence of small amount of Al and Cu on the microstructure, microhardness and tensile properties of Sn-9Zn binary eutectic solder alloy , 2009 .

[13]  J. Shen,et al.  Research advances in nano-composite solders , 2009, Microelectron. Reliab..

[14]  S. Nai,et al.  Reinforcements at nanometer length scale and the electrical resistivity of lead-free solders , 2009 .

[15]  Asit Kumar Gain,et al.  Interfacial microstructure, wettability and material properties of nickel (Ni) nanoparticle doped tin–bismuth–silver (Sn–Bi–Ag) solder on copper (Cu) substrate , 2016, Journal of Materials Science: Materials in Electronics.

[16]  D. Frear,et al.  Wetting reaction versus solid state aging of eutectic SnPb on Cu , 2001 .

[17]  Y. C. Chan,et al.  The influence of a small amount of Al and Ni nano-particles on the microstructure, kinetics and hardness of Sn–Ag–Cu solder on OSP-Cu pads , 2012 .

[18]  R. Mahmudi,et al.  Microstructure and creep characteristics of Zn–3Cu–xAl ultra high-temperature lead-free solders , 2012 .

[19]  Y. C. Chan,et al.  The influence of addition of Al nano-particles on the microstructure and shear strength of eutectic Sn-Ag-Cu solder on Au/Ni metallized Cu pads , 2010 .

[20]  Toshihiro Omori,et al.  Effects of grain size and texture on damping properties of Cu-Al-Mn-based shape memory alloys , 2006 .

[21]  Y. C. Chan,et al.  Growth mechanism of intermetallic compounds and damping properties of Sn-Ag-Cu-1 wt% nano-ZrO2 composite solders , 2014, Microelectron. Reliab..

[22]  Y. Chan,et al.  Effect of nano Ni additions on the structure and properties of Sn-9Zn and Sn-8Sn-3Bi solder in ball grid array packages , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[23]  P. Munroe,et al.  Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn–3.8Ag–0.7Cu lead-free solder and copper substrate , 2013 .

[24]  R. J. Perez,et al.  Documentation of damping capacity of metallic, ceramic and metal-matrix composite materials , 1993 .

[25]  William D. Callister,et al.  Materials Science and Engineering: An Introduction , 1985 .

[26]  Cher Ming Tan,et al.  Development of a Sn–Ag–Cu solder reinforced with Ni-coated carbon nanotubes , 2011 .

[27]  Y. Lei,et al.  Effect of rare earth on mechanical creep–fatigue property of SnAgCu solder joint , 2009 .

[28]  Tran Thai Bao,et al.  Preparation and Thermal Analysis of Sn-Ag Nano Solders , 2010 .

[29]  Y. C. Chan,et al.  Failure mechanisms of solder interconnects under current stressing in advanced electronic packages , 2010 .

[30]  Shyi-Kaan Wu,et al.  Damping characteristics of Sn–3Ag–0.5Cu and Sn–37Pb solders studied by dynamic mechanical analysis , 2010 .

[31]  R. Mahmudi,et al.  Elevated-temperature shear strength and hardness of Zn–3Cu–xAl ultra-high-temperature lead-free solders , 2013 .

[32]  Ali Roshanghias,et al.  Sn–Ag–Cu nanosolders: Melting behavior and phase diagram prediction in the Sn-rich corner of the ternary system , 2015, CALPHAD ; computer coupling of phase diagrams and thermochemistry.

[33]  Tomi Laurila,et al.  Interfacial reactions between lead-free solders and common base materials , 2005 .

[34]  Samjid H. Mannan,et al.  A review: On the development of low melting temperature Pb-free solders , 2014, Microelectron. Reliab..

[35]  King-Ning Tu,et al.  Structure and properties of lead-free solders bearing micro and nano particles , 2014 .

[36]  Seung-Boo Jung,et al.  IMC morphology, interfacial reaction and joint reliability of Pb-free Sn–Ag–Cu solder on electrolytic Ni BGA substrate , 2005 .

[37]  I. Kaban,et al.  Experimental study of density, surface tension, and contact angle of Sn–Sb-based alloys for high temperature soldering , 2010 .

[38]  Kai Qi,et al.  Intermetallic compound formation at Sn–3.0Ag–0.5Cu–1.0Zn lead-free solder alloy/Cu interface during as-soldered and as-aged conditions , 2007 .

[39]  G. Zanicchi,et al.  Wetting behaviour and reactivity of lead free Au–In–Sn and Bi–In–Sn alloys on copper substrates , 2007 .

[40]  Hamzah Arof,et al.  Effect of Ag content and the minor alloying element Fe on the electrical resistivity of Sn-Ag-Cu solder alloy , 2014 .

[41]  Nikhilesh Chawla,et al.  Thermomechanical behaviour of environmentally benign Pb-free solders , 2009 .

[42]  A. E. Hammad,et al.  Structural and elastic properties of eutectic Sn-Cu lead-free solder alloy containing small amount of Ag and in , 2011 .