Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation

[1]  Jianting Guo,et al.  Microstructure stability and mechanical properties of a new low cost hot-corrosion resistant Ni-Fe-Cr based superalloy during long-term thermal exposure , 2015 .

[2]  Chuanjie Wang,et al.  Cyclic deformation behavior of a nickel-base superalloy under fatigue loading , 2015 .

[3]  Kai-feng Zhang,et al.  Dynamic recrystallization behavior of a γ′-hardened nickel-based superalloy during hot deformation , 2015 .

[4]  Peng Zhang,et al.  Plastic deformation behavior and processing maps of a Ni-based superalloy , 2015 .

[5]  Xiao-feng Sun,et al.  Effects of grain size on the high-cycle fatigue behavior of IN792 superalloy , 2015 .

[6]  A. K. Bhaduri,et al.  Effect of Strain Rate on the Dynamic Recrystallization Behavior in a Nitrogen-Enhanced 316L(N) , 2014, Metallurgical and Materials Transactions A.

[7]  Zhen Lu,et al.  Dynamic recrystallization kinetics of a powder metallurgy Ti–22Al–25Nb alloy during hot compression , 2014 .

[8]  He Yang,et al.  Simulated and experimental investigation on discontinuous dynamic recrystallization of a near-α TA15 titanium alloy during isothermal hot compression in β single-phase field , 2014 .

[9]  Zhen Lu,et al.  Hot deformation behavior and processing map of a γ′-hardened nickel-based superalloy , 2014 .

[10]  Y. Lin,et al.  Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation , 2014 .

[11]  R. Misra,et al.  On the hot deformation behavior of AISI 420 stainless steel based on constitutive analysis and CSL model , 2014 .

[12]  Jiao Deng,et al.  Hot deformation behavior and processing map of a typical Ni-based superalloy , 2014 .

[13]  T. Baudin,et al.  Influence of stored energy on twin formation during primary recrystallization , 2014 .

[14]  R. Misra,et al.  An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation , 2013 .

[15]  R. Logé,et al.  Evolution of microstructure and twin density during thermomechanical processing in a γ-γ’ nickel-based superalloy , 2012 .

[16]  Liu Xiang-hua,et al.  Influence of deformation level on microstructure and creep behavior of GH4169 alloy , 2012 .

[17]  P. Du,et al.  Nucleation mechanisms of dynamic recrystallization in Inconel 625 superalloy deformed with different strain rates , 2012, Rare Metals.

[18]  Tadaharu Yokokawa,et al.  A new method to strengthen turbine disc superalloys at service temperatures , 2012 .

[19]  A. K. Bhaduri,et al.  Role of Twinning on Dynamic Recrystallization and Microstructure During Moderate to High Strain Rate Hot Deformation of a Ti-Modified Austenitic Stainless Steel , 2012, Metallurgical and Materials Transactions A.

[20]  A. K. Bhaduri,et al.  A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel , 2011 .

[21]  Hu Jie,et al.  Hot deformation and processing maps of Inconel 690 superalloy , 2011 .

[22]  Ying Han,et al.  Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium–high strain rates , 2011 .

[23]  Zhigang Wu,et al.  The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy , 2011 .

[24]  Hongge Yan,et al.  Effect of twinning and dynamic recrystallization on the high strain rate rolling process , 2010 .

[25]  H. W. Li,et al.  Investigation on hot deformation behavior of P/M Ni-base superalloy FGH96 by using processing maps , 2010 .

[26]  P. Withers,et al.  The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress , 2009 .

[27]  W. Shao,et al.  Hot working characteristics and dynamic recrystallization of delta-processed superalloy 718 , 2009 .

[28]  P. Čížek,et al.  Dynamic Recrystallization of Austenite in Ni-30 Pct Fe Model Alloy: Microstructure and Texture Evolution , 2009 .

[29]  W. Shao,et al.  Flow behavior and microstructures of superalloy 718 during high temperature deformation , 2008 .

[30]  H. Fu,et al.  Deformation characteristics of as-received Haynes230 nickel base superalloy , 2008 .

[31]  J. Zhong,et al.  Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel , 2008 .

[32]  Yu Wang,et al.  Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718 , 2008 .

[33]  P. Hodgson,et al.  Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallization , 2008 .

[34]  M. Yao,et al.  Development of processing maps for a Ni-based superalloy , 2007 .

[35]  C. Sommitsch,et al.  Recrystallization behaviour of the nickel‐based alloy 80 A during hot forming , 2007, Journal of microscopy.

[36]  D. Field,et al.  The role of annealing twins during recrystallization of Cu , 2007 .

[37]  Mingxing Zhang,et al.  Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy , 2007 .

[38]  Valerie Randle,et al.  Mechanisms of grain boundary engineering , 2006 .

[39]  M. Jahazi,et al.  Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy , 2005 .

[40]  H. Mcqueen.  Development of dynamic recrystallization theory , 2004 .

[41]  A. Rollett,et al.  Recrystallization and Texture Development in Hot Rolled 1050 Aluminum , 2004 .

[42]  Valerie Randle,et al.  Twinning-related grain boundary engineering , 2004 .

[43]  J. Lippold,et al.  The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys , 2003 .

[44]  K. Tsuzaki,et al.  Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation , 2003 .

[45]  Christof Sommitsch,et al.  A dislocation density model for the simulation of hot forming processes , 2002 .

[46]  S. Semiatin,et al.  The adiabatic correction factor for deformation heating during the uniaxial compression test , 2001 .

[47]  F. Montheillet,et al.  An experimental study of the recrystallization mechanism during hot deformation of aluminium , 2000 .

[48]  Valerie Randle,et al.  Mechanism of twinning-induced grain boundary engineering in low stacking-fault energy materials , 1999 .

[49]  D. Ponge,et al.  Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior , 1998 .

[50]  Y. Prasad,et al.  Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy , 1998 .

[51]  Chi Feng Lin,et al.  High-temperature deformation behaviour of Ti6Al4V alloy evaluated by high strain-rate compression tests , 1998 .

[52]  S. Mahajan,et al.  Formation of annealing twins in f.c.c. crystals , 1997 .

[53]  V. E. Sackschewsky,et al.  Effect of internal heating during hot compression on the stress-strain behavior of alloy 304L , 1994 .

[54]  Marc A. Meyers,et al.  DYNAMIC RECRYSTALLIZATION IN HIGH-STRAIN, HIGH-STRAIN-RATE PLASTIC DEFORMATION OF COPPER , 1994 .

[55]  T. Sakai,et al.  Dislocation substructures developed during dynamic recrystallisation in polycrystalline nickel , 1990 .

[56]  A. DeArdo,et al.  Dynamic softening of copper during deformation at high temperatures and strain rates , 1987 .

[57]  G. Gottstein.  Annealing texture development by multiple twinning in f.c.c. crystals , 1984 .

[58]  U. F. Kocks,et al.  Dynamic recrystallization and dynamic recovery in single crystals of nickel and copper , 1983 .