Reliable hot‐spot classification in 10 ms using ultra‐fast lock‐in thermography

We propose and demonstrate a reliable and non-destructive spatially resolved measurement technique for ultra-fast hot-spot classification of solar cells. The method can deliver quantitative images of the local heat dissipation in hot-spots in measurement times below 10 ms. The high accuracy and sensitivity allow for reliable hot-spot testing and provide the basis for a reliable classification of solar cells into different hot-spot categories. The method can be applied to wafer-based silicon solar cells and in principle also to thin-film solar cells of all material compositions. This paper explains the measurement principle, gives a detailed step-by-step description of viable automated evaluation procedures, and assesses the sensitivity and accuracy of the method.

[1]  O. Breitenstein,et al.  PRE-BREAKDOWN MECHANISMS IN MULTICRYSTALLINE SILICON SOLAR CELLS , 2008 .

[2]  F. Chenlo,et al.  Experimental study of mismatch and shading effects in the I-V characteristic of a photovoltaic module , 2006 .

[3]  O. Breitenstein,et al.  Spatially resolved silicon solar cell characterization using infrared imaging methods , 2008, 2008 33rd IEEE Photovoltaic Specialists Conference.

[4]  O. Breitenstein,et al.  Defect induced non-ideal dark I–V characteristics of solar cells , 2009 .

[5]  J. A. Kratochvil,et al.  Applications for infrared imaging equipment in photovoltaic cell, module, and system testing , 2000, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference - 2000 (Cat. No.00CH37036).

[6]  Wilhelm Warta,et al.  Emissivity-corrected power loss calibration for lock-in thermography measurements on silicon solar cells , 2008 .

[7]  J. W. Bishop.  Microplasma breakdown and hot-spots in silicon solar cells , 1989 .

[8]  W. Herrmann,et al.  Thermal and electrical effects caused by outdoor hot‐spot testing in associations of photovoltaic cells , 2003 .

[9]  O. Breitenstein,et al.  PROGRESS IN SILICON SOLAR CELL CHARACTERIZATION WITH INFRARED IMAGING METHODS , 2008 .

[10]  Luis Marroyo,et al.  An investigation into hot‐spots in two large grid‐connected PV plants , 2008 .

[11]  W. Herrmann,et al.  Hot spot tests for crystalline silicon modules , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[12]  Otwin Breitenstein,et al.  Local current-voltage curves measured thermally (LIVT): A new technique of characterizing PV cells , 1997 .

[13]  K. Bucher,et al.  Reverse characteristics of commercial silicon solar cells-impact on hot spot temperatures and module integrity , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[14]  W. Herrmann,et al.  Hot spot investigations on PV modules-new concepts for a test standard and consequences for module design with respect to bypass diodes , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[15]  Otwin Breitenstein,et al.  Imaging physical parameters of pre‐breakdown Sites by lock‐in thermography techniques , 2008 .

[16]  Otwin Breitenstein,et al.  Quantitative evaluation of shunts in solar cells by lock‐in thermography , 2003 .

[17]  T. J. McMahon,et al.  History of accelerated and qualification testing of terrestrial photovoltaic modules: A literature review , 2009 .

[18]  Wilhelm Warta,et al.  Luminescence imaging for the detection of shunts on silicon solar cells , 2008 .