Synergistic Roll‐to‐Roll Transfer and Doping of CVD‐Graphene Using Parylene for Ambient‐Stable and Ultra‐Lightweight Photovoltaics

A roll‐to‐roll (R2R) transfer technique is employed to improve the electrical properties of transferred graphene on flexible substrates using parylene as an interfacial layer. A layer of parylene is deposited on graphene/copper (Cu) foils grown by chemical vapor deposition and are laminated onto ethylene vinyl acetate (EVA)/poly(ethylene terephthalate). Then, the samples are delaminated from the Cu using an electrochemical transfer process, resulting in flexible and conductive substrates with sheet resistances of below 300 Ω sq−1, which is significantly better (fourfold) than the sample transferred by R2R without parylene (1200 Ω sq−1). The characterization results indicate that parylene C and D dope graphene due to the presence of chlorine atoms in their structure, resulting in higher carrier density and thus lower sheet resistance. Density functional theory calculations reveal that the binding energy between parylene and graphene is stronger than that of EVA and graphene, which may lead to less tear in graphene during the R2R transfer. Finally, organic solar cells are fabricated on the ultrathin and flexible parylene/graphene substrates and an ultra‐lightweight device is achieved with a power conversion efficiency of 5.86%. Additionally, the device shows a high power per weight of 6.46 W g−1 with superior air stability.

[1]  J. Kong,et al.  Efficient Semitransparent CsPbI 3 Quantum Dots Photovoltaics Using a Graphene Electrode , 2019, Small Methods.

[2]  Jing Kong,et al.  Tuning, optimization, and perovskite solar cell device integration of ultrathin poly(3,4-ethylene dioxythiophene) films via a single-step all-dry process , 2019, Science Advances.

[3]  J. Kong,et al.  A relatively wide-bandgap and air-stable donor polymer for fabrication of efficient semitransparent and tandem organic photovoltaics , 2019, Proceedings of the National Academy of Sciences.

[4]  J. Kong,et al.  Efficient and Stable Mesoscopic Perovskite Solar Cells Using PDTITT as a New Hole Transporting Layer , 2019, Advanced Functional Materials.

[5]  Lai-Peng Ma,et al.  Transfer Methods of Graphene from Metal Substrates: A Review , 2019, Small Methods.

[6]  Nathan D. Klein,et al.  Light Management in Organic Photovoltaics Processed in Ambient Conditions Using ZnO Nanowire and Antireflection Layer with Nanocone Array. , 2019, Small.

[7]  X. Duan,et al.  Van der Waals integration before and beyond two-dimensional materials , 2019, Nature.

[8]  J. Kong,et al.  Paraffin-enabled graphene transfer , 2019, Nature Communications.

[9]  Peter Bøggild,et al.  Lithographic band structure engineering of graphene , 2019, Nature Nanotechnology.

[10]  S. Zakeeruddin,et al.  Engineering of Perovskite Materials Based on Formamidinium and Cesium Hybridization for High-Efficiency Solar Cells , 2019, Chemistry of Materials.

[11]  Zhiyong Fan,et al.  Printable Fabrication of a Fully Integrated and Self‐Powered Sensor System on Plastic Substrates , 2018, Advanced materials.

[12]  J. Kong,et al.  A graphene/ZnO electron transfer layer together with perovskite passivation enables highly efficient and stable perovskite solar cells , 2018, Journal of Materials Chemistry A.

[13]  G. Paterakis,et al.  Strain Engineering in Highly Wrinkled CVD Graphene/Epoxy Systems. , 2018, ACS applied materials & interfaces.

[14]  Wei Li,et al.  A review on high throughput roll-to-roll manufacturing of chemical vapor deposition graphene , 2018, Applied Physics Reviews.

[15]  E. Kymakis,et al.  2D Materials Beyond Graphene for Metal Halide Perovskite Solar Cells , 2018, Advanced Materials Interfaces.

[16]  M. Pumera,et al.  The chemistry of CVD graphene , 2018 .

[17]  L. A. Pinheiro,et al.  Correlation between Surface Energy and Adhesion Force of Polyethylene/Paperboard: A Predictive Tool for Quality Control in Laminated Packaging , 2018, International Journal of Chemical Engineering.

[18]  S. Zakeeruddin,et al.  Elucidation of Charge Recombination and Accumulation Mechanism in Mixed Perovskite Solar Cells , 2018, The Journal of Physical Chemistry C.

[19]  M. Lanza,et al.  Repeated roll-to-roll transfer of two-dimensional materials by electrochemical delamination. , 2018, Nanoscale.

[20]  E. Bekyarova,et al.  Advances in transferring chemical vapour deposition graphene: a review , 2017 .

[21]  Giulio Cerullo,et al.  Broadband, electrically tunable third-harmonic generation in graphene , 2017, Nature Nanotechnology.

[22]  P. Kim,et al.  Band structure engineering of 2D materials using patterned dielectric superlattices , 2017, Nature Nanotechnology.

[23]  H. Lipsanen,et al.  Direct transfer of wafer-scale graphene films , 2017 .

[24]  Yang Yang,et al.  Unveiling the carrier transport mechanism in epitaxial graphene for forming wafer-scale, single-domain graphene , 2017, Proceedings of the National Academy of Sciences.

[25]  E. Kymakis,et al.  Size-Tuning of WSe2 Flakes for High Efficiency Inverted Organic Solar Cells. , 2017, ACS nano.

[26]  Jong-Hyun Ahn,et al.  Damage mitigation in roll-to-roll transfer of CVD-graphene to flexible substrates , 2017 .

[27]  Jared P. Ness,et al.  Fabrication and utility of a transparent graphene neural electrode array for electrophysiology, in vivo imaging, and optogenetics , 2016, Nature Protocols.

[28]  Jing Kong,et al.  Visibly‐Transparent Organic Solar Cells on Flexible Substrates with All‐Graphene Electrodes , 2016 .

[29]  V. Bulović,et al.  In situ vapor-deposited parylene substrates for ultra-thin, lightweight organic solar cells , 2016 .

[30]  Zhiyong Fan,et al.  Efficient, flexible and mechanically robust perovskite solar cells on inverted nanocone plastic substrates. , 2016, Nanoscale.

[31]  J. Gai,et al.  Progress and Challenges in Transfer of Large‐Area Graphene Films , 2016, Advanced science.

[32]  Zhiyong Fan,et al.  Chemical processing of three-dimensional graphene networks on transparent conducting electrodes for depleted-heterojunction quantum dot solar cells. , 2016, Chemical communications.

[33]  Z. Fan,et al.  Hybrid zinc oxide/graphene electrodes for depleted heterojunction colloidal quantum-dot solar cells. , 2015, Physical chemistry chemical physics : PCCP.

[34]  D. L. Mafra,et al.  Facile graphene transfer directly to target substrates with a reusable metal catalyst. , 2015, Nanoscale.

[35]  Ankanahalli Shankaregowda Smitha,et al.  Roll‐to‐Roll Green Transfer of CVD Graphene onto Plastic for a Transparent and Flexible Triboelectric Nanogenerator , 2015, Advanced materials.

[36]  Z. Fan,et al.  Quasi Core/Shell Lead Sulfide/Graphene Quantum Dots for Bulk Heterojunction Solar Cells , 2015 .

[37]  C. Bannwarth,et al.  Consistent structures and interactions by density functional theory with small atomic orbital basis sets. , 2015, The Journal of chemical physics.

[38]  Sung‐Yool Choi,et al.  Interface engineering for high performance graphene electronic devices , 2015, Nano Convergence.

[39]  Yi Cui,et al.  Roll-to-Roll Encapsulation of Metal Nanowires between Graphene and Plastic Substrate for High-Performance Flexible Transparent Electrodes. , 2015, Nano letters.

[40]  B. Viswanath,et al.  High-speed roll-to-roll manufacturing of graphene using a concentric tube CVD reactor , 2015, Scientific Reports.

[41]  M. Tavakoli,et al.  Supercritical synthesis and in situ deposition of PbS nanocrystals with oleic acid passivation for quantum dot solar cells , 2015 .

[42]  Henny W. Zandbergen,et al.  Controlling Defects in Graphene for Optimizing the Electrical Properties of Graphene Nanodevices , 2015, ACS nano.

[43]  P. Lambin.  Elastic Properties and Stability of Physisorbed Graphene , 2014 .

[44]  S. Chae,et al.  Carbon nanotubes and graphene towards soft electronics , 2014, Nano Convergence.

[45]  M. Dresselhaus,et al.  Direct transfer of graphene onto flexible substrates , 2013, Proceedings of the National Academy of Sciences.

[46]  A. Ferrari,et al.  Production and processing of graphene and 2d crystals , 2012 .

[47]  Min Hyeok Kim,et al.  Efficient transfer of large-area graphene films onto rigid substrates by hot pressing. , 2012, ACS nano.

[48]  S. Grimme,et al.  A geometrical correction for the inter- and intra-molecular basis set superposition error in Hartree-Fock and density functional theory calculations for large systems. , 2012, The Journal of chemical physics.

[49]  Q. Fu,et al.  Repeated growth and bubbling transfer of graphene with millimetre-size single-crystal grains using platinum , 2012, Nature Communications.

[50]  M. Kaltenbrunner,et al.  Ultrathin and lightweight organic solar cells with high flexibility , 2012, Nature Communications.

[51]  D. Yoon,et al.  Negative thermal expansion coefficient of graphene measured by Raman spectroscopy. , 2011, Nano letters.

[52]  Stefan Grimme,et al.  Effect of the damping function in dispersion corrected density functional theory , 2011, J. Comput. Chem..

[53]  Julio Gómez-Herrero,et al.  2D materials: to graphene and beyond. , 2011, Nanoscale.

[54]  R. Kaner,et al.  Honeycomb carbon: a review of graphene. , 2010, Chemical reviews.

[55]  Kwang S. Kim,et al.  Roll-to-roll production of 30-inch graphene films for transparent electrodes. , 2009, Nature nanotechnology.

[56]  Joongoo Kang,et al.  Electronic structure of graphene and doping effect on SiO 2 , 2008 .