Probe into effect of the initiator on the thermal runaway hazards of methyl methacrylate bulk polymerization

[1]  B. Shen,et al.  Thermal kinetics analysis of polymerization reaction of styrene-ethylbenzene system , 2021 .

[2]  R. Xu,et al.  Application of solubility parameters in the preparation of PMMA with permanent antistatic, high toughness, and excellent optical properties , 2021, Polymers for Advanced Technologies.

[3]  M. Mannan,et al.  Thermal hazards analysis of styrene in contact with impurities , 2020 .

[4]  Hong-bo Wu,et al.  Influence and assessment of AIBN on thermal hazard under process situations , 2020, Journal of Thermal Analysis and Calorimetry.

[5]  A. Zheng,et al.  The Trommsdorff effect under shear and bulk polymerization of methyl methacrylate via reactive extrusion , 2020 .

[6]  C. Shu,et al.  Evaluation of thermal hazards based on thermokinetic parameters of 2-(1-cyano-1-methylethyl)azocarboxamide by ARC and DSC , 2019, Journal of Thermal Analysis and Calorimetry.

[7]  Y. Izato,et al.  Thermal hazard evaluation of runaway polymerization of acrylic acid , 2019, Process Safety and Environmental Protection.

[8]  M. Mannan,et al.  Probing into Styrene Polymerization Runaway Hazards: Effects of the Monomer Mass Fraction , 2019, ACS omega.

[9]  C. Shu,et al.  Experimental and numerical simulation study of the thermal hazards of four azo compounds. , 2019, Journal of hazardous materials.

[10]  Yong Pan,et al.  Computational Fluid Dynamics Simulation of Thermal Runaway Reaction of Styrene Polymerization , 2019, Organic Process Research & Development.

[11]  G. Moad,et al.  Nonmigratory Poly(vinyl chloride)-block-polycaprolactone Plasticizers and Compatibilizers Prepared by Sequential RAFT and Ring-Opening Polymerization (RAFT-T̵-ROP) , 2019, Macromolecules.

[12]  Guangjian Wang,et al.  Study on the thermal risk of the ethylene-vinyl acetate bulk copolymerization , 2019, Thermochimica Acta.

[13]  Lei Ni,et al.  Thermal research on the uncontrolled behavior of styrene bulk polymerization , 2019, Journal of Loss Prevention in the Process Industries.

[14]  A. Stebner,et al.  Phase separation during bulk polymerization of methyl methacrylate , 2018, Polymer Journal.

[15]  Jun-cheng Jiang,et al.  Thermal analysis of the styrene bulk polymerization and characterization of polystyrene initiated by two methods , 2018, Chemical Engineering Communications.

[16]  Lei Ni,et al.  Research on thermal runaway process of styrene bulk polymerization , 2018 .

[17]  H. Park,et al.  Effect of Azo and Peroxide Initiators on a Kinetic Study of Methyl Methacrylate Free Radical Polymerization by DSC , 2018, Macromolecular Research.

[18]  B. Kappes,et al.  Kinetics and temperature evolution during the bulk polymerization of methyl methacrylate for vacuum-assisted resin transfer molding , 2018 .

[19]  M. H. Gil,et al.  Preparation of acrylic based microcapsules using different reaction conditions for thermo-regulating textiles production , 2017 .

[20]  M. Morbidelli,et al.  Effect of Dispersed Polymeric Nanoparticles on the Bulk Polymerization of Methyl Methacrylate , 2016 .

[21]  Rim Saada,et al.  Causes and consequences of thermal runaway incidents—Will they ever be avoided? , 2015 .

[22]  G. Maschio,et al.  Investigation of an accident in a resins manufacturing site: the role of accelerator on polymerisation of methyl methacrylate. , 2014, Journal of hazardous materials.

[23]  Dongmei Zhao,et al.  Preparation of blends of poly(methyl methacrylate) copolymers with high glass transition temperatures and low hydrophilicity , 2013 .

[24]  Farhad Ein-Mozaffari,et al.  Use of CFD in modeling MMA solution polymerization in a CSTR , 2013 .

[25]  P. Netti,et al.  Isothermal and non-isothermal polymerization of methyl methacrylate in presence of multiple initiators , 2010 .

[26]  Haresh Patel,et al.  CFD analysis of mixing in thermal polymerization of styrene , 2010, Comput. Chem. Eng..

[27]  C. Shu,et al.  Calorimetric studies on the thermal hazard of methyl ethyl ketone peroxide with incompatible substances. , 2007, Journal of hazardous materials.

[28]  INCIDENTS IN THE CHEMICAL INDUSTRY DUE TO THERMAL-RUNAWAY CHEMICAL REACTIONS , 2007 .

[29]  R. Nomen,et al.  Study of Major Accidents Involving Chemical Reactive Substances: Analysis and Lessons Learned , 2007 .

[30]  Claudio Ampelli,et al.  Calorimetric study of the inhibition of runaway reactions during methylmethacrylate polymerization processes , 2006 .

[31]  J. Gustin.  Understanding vinyl acetate polymerization accidents , 2005 .

[32]  Bo Wang,et al.  Tentative study on kinetics of bulk polymerization of methyl methacrylate in presence of montmorillonite , 2003 .

[33]  Chi-Min Shu,et al.  Exothermic decomposition of cumene hydroperoxide at low temperature conditions , 2001 .

[34]  S. Gupta,et al.  Free-radical polymerizations associated with the Trommsdorff effect under semibatch reactor conditions. IV. On-line inferential-state estimation , 1997 .

[35]  H. Ghaziaskar,et al.  Noninvasive Spectroscopic Detection of Bulk Polymerization by Stimulated Raman Scattering , 1994 .

[36]  Archie E. Hamielec,et al.  Polymerization of methyl methacrylate up to high degrees of conversion: Experimental investigation of the diffusion‐controlled polymerization , 1984 .

[37]  E. Gulari,et al.  Raman and FTIR spectroscopy of polymerization: bulk polymerization of methyl methacrylate and styrene , 1984 .

[38]  David S. Soong,et al.  A computer model for the gel effect in free-radical polymerization , 1983 .

[39]  D. I. Townsend,et al.  Thermal hazard evaluation by an accelerating rate calorimeter , 1980 .

[40]  M. Stickler,et al.  The spontaneous polymerization of methyl methacrylate-IV: Formation of cyclic dimers and linear trimers , 1980 .

[41]  V. R. Kamath,et al.  The selection and use of free radical initiators , 1979 .

[42]  G. Meyerhoff,et al.  Die thermische Polymerisation von Methylmethacrylat, 1. Polymerisation in Substanz , 1978 .

[43]  A. Hamielec,et al.  Bulk polymerization of methyl methacrylate , 1973 .

[44]  K. Horie,et al.  Calorimetric investigation of polymerization reactions. I. Diffusion‐controlled polymerization of methyl methacrylate and styrene , 1968 .

[45]  W. O. Kenyon,et al.  Heats of Polymerization. I. An Isothermal Calorimeter and its Application to Methyl Methacrylate , 1945 .