论文信息 - 1.4-GHz Bandwidth Frequency-Dependent I/Q Imbalance Calibration for 5G mmWave Communications

1.4-GHz Bandwidth Frequency-Dependent I/Q Imbalance Calibration for 5G mmWave Communications

This paper presents a frequency-dependent in-phase and quadrature-phase (IQ) imbalance calibration technique for ultra-wide bandwidth 5G millimeter-wave communication chipsets. Using a multi-tone training signal and a phase shifter inserted in the transceiver local loopback path, the transmitter and receiver IQ imbalances can be estimated separately. The complex finite-impulse response filter introduced in this work compensates the spectrum flatness and the IQ imbalance concurrently and achieved an average image-rejection ratio of 51.6 dB over 1.4 GHz of bandwidth.

[1] Satoshi Suyama,et al. Experiment of 28 GHz Band 5G super wideband transmission using beamforming and beam tracking in high mobility environment , 2016, 2016 IEEE 27th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC).

[2] Xiaojing Huang,et al. Transceiver I/Q Imbalance Self-Calibration With Phase-Shifted Local Loopback for Multichannel Microwave Backhaul , 2016, IEEE Transactions on Wireless Communications.

[3] Ainhoa Rezola,et al. Built-in-Self-Calibration for I/Q Imbalance in Wideband Millimeter-Wave Gigabit Transmitters , 2017, IEEE Transactions on Microwave Theory and Techniques.

[4] Y. Fujimura,et al. An 802.11ax 4 $\times$ 4 High-Efficiency WLAN AP Transceiver SoC Supporting 1024-QAM With Frequency-Dependent IQ Calibration and Integrated Interference Analyzer , 2018, IEEE Journal of Solid-State Circuits.