Effects of Al(OH)3 on the Structure and Properties of Foam Ceramics Cemented by Phosphate
暂无分享,去创建一个
R. Ding | C. Jia | An Liu | Dongxiao Teng | Jun cheng Liu
[1] Jang-Hoon Ha,et al. Enhancement of the compressive strength of highly porous Al2O3 foam through crack healing and improvement of the surface condition by dip-coating , 2014 .
[2] H. Al-Qureshi,et al. Fiber-Matrix Compatibility in an All-Oxide Ceramic Composite with RBAO Matrix , 2012 .
[3] C. Hsueh,et al. Low thermal conductivity of porous Al2O3 foams for SOFC insulation , 2011 .
[4] H. Yong,et al. Fabrication of Low Density High Strength Porous Mullite Ceramics by Tert-butyl Alcohol-based Gelcasting Process: Fabrication of Low Density High Strength Porous Mullite Ceramics by Tert-butyl Alcohol-based Gelcasting Process , 2009 .
[5] A. Eckel,et al. Oxidation Kinetics and Stress Effects for the Oxidation of Continuous Carbon Fibers within a Microcracked C/SiC Ceramic Matrix Composite , 2008 .
[6] M. Weinmann,et al. Fabrication of Fiber‐Reinforced Ceramic Composites by the Modified Slurry Infiltration Technique , 2007 .
[7] E. Saiz,et al. Elaboration of self-coating alumina-based porous ceramics , 2006 .
[8] André R. Studart,et al. Processing Routes to Macroporous Ceramics: A Review , 2006 .
[9] R. Hay,et al. Zirconia–Silica–Carbon Coatings on Ceramic Fibers , 2005 .
[10] Shi Tian,et al. Preparation, Phase Transformation and Dielectric Properties of Aluminum Phosphate Compounds , 2005 .