FMEA for Proactive Healthcare Risk Analysis: A Systematic Literature Review

FMEA is a valuable reliability management tool that can preemptively identify the potential failures of a system and assess their causes and effects, thereby preventing them from occurring.

[1]  Sasa Mutic,et al.  Process-based quality management for clinical implementation of adaptive radiotherapy. , 2014, Medical physics.

[2]  Ren-Guey Lee,et al.  EXAMPLE FOR MOBILE ECG HOLTER DESIGN USING FMEA MODEL , 2009 .

[3]  D. Reith,et al.  Identification of Priorities for Medication Safety in Neonatal Intensive Care , 2005, Drug safety.

[4]  Chao Chung Ho,et al.  The use of failure mode and effects analysis to construct an effective disposal and prevention mechanism for infectious hospital waste. , 2011, Waste management.

[5]  Hu-Chen Liu,et al.  A novel approach for failure mode and effects analysis using combination weighting and fuzzy VIKOR method , 2015, Appl. Soft Comput..

[6]  J. Poder,et al.  A risk-based approach to development of ultrasound-based high-dose-rate prostate brachytherapy quality management. , 2018, Brachytherapy.

[7]  Paul Keall,et al.  Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems. , 2010, Medical physics.

[8]  R. Aggarwal,et al.  Using Failure Mode and Effects Analysis to identify hazards within resuscitation , 2009 .

[9]  Cengiz Kahraman,et al.  Healthcare Failure Mode and Effects Analysis Under Fuzziness , 2013 .

[10]  C. Derry,et al.  Failure analysis in the identification of synergies between cleaning monitoring methods. , 2015, American journal of infection control.

[11]  J. Moss.  Reducing errors during patient-controlled analgesia therapy through failure mode and effects analysis. , 2010, Joint Commission journal on quality and patient safety.

[12]  Wei-Chun Huang,et al.  The effect of failure mode and effect analysis on reducing percutaneous coronary intervention hospital door-to-balloon time and mortality in ST segment elevation myocardial infarction , 2013, BMJ quality & safety.

[13]  Hu-Chen Liu,et al.  Evaluating the risk of failure modes with a hybrid MCDM model under interval-valued intuitionistic fuzzy environments , 2016, Comput. Ind. Eng..

[14]  Jolene Fox,et al.  Failure mode and effects analysis as a performance improvement tool in trauma. , 2006, Journal of trauma nursing : the official journal of the Society of Trauma Nurses.

[15]  David D. Wilson,et al.  Safety and feasibility of STAT RAD: Improvement of a novel rapid tomotherapy-based radiation therapy workflow by failure mode and effects analysis. , 2015, Practical radiation oncology.

[16]  Agustín Vázquez‐Valencia,et al.  Utility of Failure Mode and Effect Analysis to Improve Safety in Suctioning by Orotracheal Tube , 2017, Journal of perianesthesia nursing : official journal of the American Society of PeriAnesthesia Nurses.

[17]  M. Apkon,et al.  Design of a safer approach to intravenous drug infusions: failure mode effects analysis , 2004, Quality and Safety in Health Care.

[18]  D. Barends,et al.  Risk analysis of analytical validations by probabilistic modification of FMEA. , 2012, Journal of pharmaceutical and biomedical analysis.

[19]  Eric C Ford,et al.  A streamlined failure mode and effects analysis. , 2014, Medical physics.

[20]  Christian Lovis,et al.  Model Formulation: A Risk Analysis Method to Evaluate the Impact of a Computerized Provider Order Entry System on Patient Safety , 2008, J. Am. Medical Informatics Assoc..

[21]  D. Gabrielli,et al.  Clinical risk analysis with failure mode and effect analysis (FMEA) model in a dialysis unit. , 2010, Journal of nephrology.

[22]  Racheli Magnezi,et al.  Using the failure mode and effects analysis model to improve parathyroid hormone and adrenocorticotropic hormone testing , 2016, Risk management and healthcare policy.

[23]  J. Prisciandaro,et al.  Failure mode and effects analysis in a dual-product microsphere brachytherapy environment. , 2016, Practical radiation oncology.

[24]  Hu-Chen Liu,et al.  Failure Mode and Effect Analysis Under Uncertainty: An Integrated Multiple Criteria Decision Making Approach , 2016, IEEE Transactions on Reliability.

[25]  P. Prognon,et al.  Use of a risk assessment method to improve the safety of negative pressure wound therapy , 2014, International wound journal.

[26]  M. Scorsetti,et al.  Applying failure mode effects and criticality analysis in radiotherapy: lessons learned and perspectives of enhancement. , 2010, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[27]  K. Hyrkäs,et al.  Improving process while changing practice: FMEA and medication administration. , 2008, Nursing management.

[28]  Christos Chouaid,et al.  Failure Mode, Effects and Criticality Analysis (FMECA) as a means of improving the hospital drug prescribing process , 2002 .

[29]  Annamaria Bagnasco,et al.  Identifying and correcting communication failures among health professionals working in the Emergency Department. , 2013, International emergency nursing.

[30]  Jonathan B Kruskal,et al.  Application of failure mode and effect analysis in a radiology department. , 2011, Radiographics : a review publication of the Radiological Society of North America, Inc.

[31]  Scott Weber.  Ergonomics standards: an overview. Know your part in establishing programs in skilled nursing facilities, hospitals, or assisted-living settings. , 2008, Nursing management.

[32]  M. He,et al.  Application of failure mode and effect analysis in managing catheter-related blood stream infection in intensive care unit , 2017, Medicine.

[33]  A. Komorowski,et al.  Application of Failure Mode and Effect Analysis in Laparoscopic Colon Surgery Training , 2014, World Journal of Surgery.

[34]  Amy S Harrison,et al.  Clinical implementation and failure mode and effects analysis of HDR skin brachytherapy using Valencia and Leipzig surface applicators. , 2015, Brachytherapy.

[35]  S. Kimura,et al.  Failure mode and effects analysis of medication adherence in patients with chronic myeloid leukemia , 2015, International Journal of Clinical Oncology.

[36]  G. Armitage,et al.  Improving the safety of chemotherapy administration: an oncology nurse-led failure mode and effects analysis. , 2011, Oncology nursing forum.

[37]  A. Elyse,et al.  Drug Shortages: Process for Evaluating Impact on Patient Safety , 2011 .

[38]  Eduardo G Moros,et al.  Treatment delivery software for a new clinical grade ultrasound system for thermoradiotherapy. , 2005, Medical physics.

[39]  Julian R Perks,et al.  Failure mode and effect analysis for delivery of lung stereotactic body radiation therapy. , 2012, International journal of radiation oncology, biology, physics.

[40]  Pietro Mancosu,et al.  Multi-institutional application of Failure Mode and Effects Analysis (FMEA) to CyberKnife Stereotactic Body Radiation Therapy (SBRT) , 2015, Radiation Oncology.

[41]  Kuo-Chung Chu,et al.  Adaptive Failure Identification for Healthcare Risk Analysis and Its Application on E-Healthcare , 2014, J. Appl. Math..

[42]  Amir Babiker,et al.  Failure Mode and Effect Analysis (FMEA) may enhance implementation of clinical practice guidelines: An experience from the Middle East , 2018, Journal of evaluation in clinical practice.

[43]  Lisa M. Daniels,et al.  Failure mode and effects analysis to reduce risk of anticoagulation levels above the target range during concurrent antimicrobial therapy. , 2015, American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists.

[44]  H. Marín-Mateos,et al.  Safety Management of a Clinical Process Using Failure Mode and Effect Analysis: Continuous Renal Replacement Therapies in Intensive Care Unit Patients , 2016, ASAIO journal.

[45]  L. Bisanti,et al.  Implementation of Failure Mode and Effects Analysis to the specimens flow in a population-based colorectal cancer screening programme using immunochemical faecal occult blood tests: a quality improvement project in the Milan colorectal cancer screening programme , 2018, BMJ open quality.

[46]  J. Roselló,et al.  Failure mode and effects analysis of skin electronic brachytherapy using Esteya® unit , 2016, Journal of contemporary brachytherapy.

[47]  Paola Viganò,et al.  Application of failure mode and effect analysis in an assisted reproduction technology laboratory. , 2016, Reproductive biomedicine online.

[48]  Pascal Bonnabry,et al.  Use of a prospective risk analysis method to improve the safety of the cancer chemotherapy process. , 2006, International journal for quality in health care : journal of the International Society for Quality in Health Care.

[49]  Hu-Chen Liu,et al.  An integrated approach for failure mode and effect analysis under interval-valued intuitionistic fuzzy environment , 2017, International Journal of Production Economics.

[50]  Melissa Heigham,et al.  Using Failure Mode and Effects Analysis for safe administration of chemotherapy to hospitalized children with cancer. , 2006, Joint Commission journal on quality and patient safety.

[51]  Roberto Orecchia,et al.  Application of failure mode and effects analysis to treatment planning in scanned proton beam radiotherapy , 2013, Radiation Oncology.

[52]  S. Weingart,et al.  Medication safety of five oral chemotherapies: a proactive risk assessment. , 2011, Journal of oncology practice.

[53]  Khin Than Win,et al.  Electronic health record system risk assessment : a case study from the MINET , 2004 .

[54]  Greg Bednarz,et al.  Failure modes and effects analysis (FMEA) for Gamma Knife radiosurgery , 2017, Journal of applied clinical medical physics.

[55]  Ryan P Manger,et al.  Failure mode and effects analysis and fault tree analysis of surface image guided cranial radiosurgery. , 2015, Medical physics.

[56]  Juan López-Tarjuelo,et al.  Failure mode and effect analysis oriented to risk-reduction interventions in intraoperative electron radiation therapy: the specific impact of patient transportation, automation, and treatment planning availability. , 2014, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[57]  FMECA Application to Intraoperative Electron Beam Radiotherapy Procedure As a Quality Method to Prevent and Reduce Patient’s Risk in Conservative Surgery for Breast Cancer , 2017, Front. Med..

[58]  R. Magnezi,et al.  Introducing a change in hospital policy using FMEA methodology as a tool to reduce patient hazards , 2016, Israel Journal of Health Policy Research.

[59]  H. Schneider.  Failure mode and effect analysis : FMEA from theory to execution , 1996 .

[60]  K. Yu,et al.  Using ‘failure mode and effects analysis’ to design a surgical safety checklist for safer surgery , 2010 .

[61]  Hu-Chen Liu,et al.  A Novel Approach for FMEA: Combination of Interval 2‐Tuple Linguistic Variables and Gray Relational Analysis , 2015, Qual. Reliab. Eng. Int..

[62]  T Kuhlen,et al.  Failure mode and effects analysis in designing a virtual reality‐based training simulator for bilateral sagittal split osteotomy , 2013, The international journal of medical robotics + computer assisted surgery : MRCAS.

[63]  J. Roselló,et al.  Failure modes and effects analysis of total skin electron irradiation technique , 2018, Clinical and Translational Oncology.

[64]  Mesut Kumru,et al.  Fuzzy FMEA application to improve purchasing process in a public hospital , 2013, Appl. Soft Comput..

[65]  A. Slonim,et al.  Assessing patient safety risk before the injury occurs: an introduction to sociotechnical probabilistic risk modelling in health care , 2003, Quality & safety in health care.

[66]  Y. Niv,et al.  The Utility of Failure Modes and Effects Analysis of Consultations in a Tertiary, Academic, Medical Center , 2018, Quality management in health care.

[67]  J. Dankelman,et al.  Defining Hazards of Supplemental Oxygen Therapy in Neonatology Using the FMEA Tool , 2013, MCN. The American journal of maternal child nursing.

[68]  Improving the treatment planning and delivery process of Xoft electronic skin brachytherapy. , 2018, Brachytherapy.

[69]  M. Saulino,et al.  The Application of Failure Modes and Effects Analysis Methodology to Intrathecal Drug Delivery for Pain Management , 2016, Neuromodulation : journal of the International Neuromodulation Society.

[70]  R. Orecchia,et al.  Application of failure mode and effects analysis to intraoperative radiation therapy using mobile electron linear accelerators. , 2012, International journal of radiation oncology, biology, physics.

[71]  Julie Greenall,et al.  Using ISMP Canada's framework for failure mode and effects analysis: a tale of two FMEAs. , 2008, Healthcare quarterly.

[72]  Gwe-Ya Kim,et al.  A comparison of two prospective risk analysis methods: Traditional FMEA and a modified healthcare FMEA. , 2016, Medical physics.

[73]  A. D. Ookalkar,et al.  Quality improvement in haemodialysis process using FMEA , 2009 .

[74]  C Silvain,et al.  Use of a risk analysis method to improve care management for outlying inpatients in a university hospital , 2009, Quality and Safety in Health Care.

[75]  M. Thibault,et al.  Failure Mode, Effect, and Criticality Analysis of the Parenteral Nutrition Process in a Mother–Child Hospital: The AMELIORE Study , 2018, Nutrition in clinical practice : official publication of the American Society for Parenteral and Enteral Nutrition.

[76]  Khushboo Jain,et al.  Use of failure mode effect analysis (FMEA) to improve medication management process. , 2017, International journal of health care quality assurance.

[77]  Roberto Miniati,et al.  Integrated HTA-FMEA/FMECA methodology for the evaluation of robotic system in urology and general surgery. , 2016, Technology and health care : official journal of the European Society for Engineering and Medicine.

[78]  Y. Arabi,et al.  Application of Failure Mode Effect Analysis to Improve the Care of Septic Patients Admitted Through the Emergency Department , 2017, Journal of patient safety.

[79]  Mario Capunzo,et al.  A FMEA clinical laboratory case study: how to make problems and improvements measurable. , 2004, Clinical leadership & management review : the journal of CLMA.

[80]  Hu-Chen Liu,et al.  Failure Mode and Effect Analysis Using Cloud Model Theory and PROMETHEE Method , 2017, IEEE Transactions on Reliability.

[81]  Rathachai Kaewlai,et al.  Radiology failure mode and effect analysis: what is it? , 2009, Radiology.

[82]  Jie Zhou,et al.  Failure mode and effect analysis in blood transfusion: a proactive tool to reduce risks , 2013, Transfusion.

[83]  K. Younge,et al.  Practical implementation of failure mode and effects analysis for safety and efficiency in stereotactic radiosurgery. , 2015, International journal of radiation oncology, biology, physics.

[84]  Christina Nguyen,et al.  The AMÉLIE project: failure mode, effects and criticality analysis: a model to evaluate the nurse medication administration process on the floor. , 2013, Journal of evaluation in clinical practice.

[85]  M. Yarmohammadian,et al.  Clinical Risk Assessment in Intensive Care Unit , 2013, International journal of preventive medicine.

[86]  Roberta Maggiulli,et al.  Failure mode and effects analysis of witnessing protocols for ensuring traceability during PGD/PGS cycles. , 2016, Reproductive biomedicine online.

[87]  Wayne Adachi,et al.  Use of failure mode and effects analysis in improving the safety of i.v. drug administration. , 2005, American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists.

[88]  P. Bonnabry,et al.  Use of a systematic risk analysis method to improve safety in the production of paediatric parenteral nutrition solutions , 2005, Quality and Safety in Health Care.

[89]  James G. Adams,et al.  Use of risk assessment analysis by failure mode, effects, and criticality to reduce door-to-balloon time. , 2013, Annals of emergency medicine.

[90]  Gerry Armitage,et al.  Failure Mode and Effects Analysis: An Empirical Comparison of Failure Mode Scoring Procedures , 2010, Journal of patient safety.

[91]  N Cao,et al.  Validating FMEA output against incident learning data: A study in stereotactic body radiation therapy. , 2015, Medical physics.

[92]  Kerry Bailey,et al.  Exploring the delivery of antiretroviral therapy for symptomatic HIV in Swaziland: threats to the successful treatment and safety of outpatients attending regional and district clinics , 2011, Quality and Safety in Health Care.

[93]  Hu-Chen Liu,et al.  An integrated failure mode and effect analysis approach for accurate risk assessment under uncertainty , 2016 .

[94]  G. Banfi,et al.  FMECA methodology applied to two pathways in an orthopaedic hospital in Milan. , 2007, Journal of preventive medicine and hygiene.

[95]  Afshin Jamshidi,et al.  A comprehensive fuzzy risk-based maintenance framework for prioritization of medical devices , 2015, Appl. Soft Comput..

[96]  N. Sumita,et al.  Practical aspects of the use of FMEA tool in clinical laboratory risk management , 2013 .

[97]  C. Vora,et al.  Risk based approach for design and optimization of stomach specific delivery of rifampicin. , 2013, International journal of pharmaceutics.

[98]  Daniela P Ladner,et al.  Failure mode and effects analysis: a comparison of two common risk prioritisation methods , 2015, BMJ Quality & Safety.

[99]  J. Villafranca,et al.  Using failure mode and effects analysis to improve the safety of neonatal parenteral nutrition , 2014 .

[100]  A Serafini,et al.  Use of a systematic risk analysis method (FMECA) to improve quality in a clinical laboratory procedure. , 2016, Annali di igiene : medicina preventiva e di comunita.

[101]  Mehrzad Navabakhsh,et al.  Designing a model for reliability improvement with FTA and FMEA techniques on medical gas outlet , 2014 .

[102]  J. Burgmeier,et al.  Failure mode and effect analysis: an application in reducing risk in blood transfusion. , 2002, The Joint Commission journal on quality improvement.

[103]  Pascale Carayon,et al.  Using failure mode and effects analysis to plan implementation of smart i.v. pump technology. , 2006, American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists.

[104]  E. Redfern,et al.  Identifying vulnerabilities in communication in the emergency department , 2009, Emergency Medicine Journal.

[105]  S. Dusini,et al.  Comprehensive protocol of traceability during IVF: the result of a multicentre failure mode and effect analysis , 2017, Human reproduction.

[106]  K. Elsaid,et al.  Using an enhanced oral chemotherapy computerized provider order entry system to reduce prescribing errors and improve safety. , 2011, International journal for quality in health care : journal of the International Society for Quality in Health Care.

[107]  Hu-Chen Liu,et al.  An integrated approach for failure mode and effect analysis based on uncertain linguistic GRA–TOPSIS method , 2018, Soft Comput..

[108]  R. Conroy,et al.  Adverse events in healthcare: learning from mistakes. , 2015, QJM : monthly journal of the Association of Physicians.

[109]  J. R. Jadhav,et al.  Risk management in medical product development process using traditional FMEA and fuzzy linguistic approach: a case study , 2015 .

[110]  Fu-Chiang Yang,et al.  A Novel Approach for Evaluating the Risk of Health Care Failure Modes , 2012, Journal of Medical Systems.

[111]  Hu-Chen Liu,et al.  Evaluating the risk of healthcare failure modes using interval 2-tuple hybrid weighted distance measure , 2014, Comput. Ind. Eng..

[112]  Garill Coles,et al.  Using failure mode effects and criticality analysis for high-risk processes at three community hospitals. , 2005, Joint Commission journal on quality and patient safety.

[113]  Pascal Bonnabry,et al.  Prospective risk analysis and incident reporting for better pharmaceutical care at paediatric hospital discharge , 2014, International Journal of Clinical Pharmacy.

[114]  Stephanie A Terezakis,et al.  Safety strategies in an academic radiation oncology department and recommendations for action. , 2011, Joint Commission journal on quality and patient safety.

[115]  D M Barends,et al.  Risk analysis by FMEA as an element of analytical validation. , 2009, Journal of pharmaceutical and biomedical analysis.

[116]  Nan Liu,et al.  Risk evaluation approaches in failure mode and effects analysis: A literature review , 2013, Expert Syst. Appl..

[117]  Karen Claxton,et al.  Failure modes effects analysis (FMEA) for review of a diagnostic genetic laboratory process , 2017 .

[118]  Ana Herranz-Alonso,et al.  Use of failure mode, effect and criticality analysis to improve safety in the medication administration process. , 2015, Journal of evaluation in clinical practice.

[119]  Lisa M. Daniels,et al.  Practical Implementation of Failure Mode and Effects Analysis for Extracorporeal Membrane Oxygenation Activation , 2018, American journal of medical quality : the official journal of the American College of Medical Quality.

[120]  Ali Kokangul,et al.  Classical and fuzzy FMEA risk analysis in a sterilization unit , 2016, Comput. Ind. Eng..

[121]  Bradley W. Schuller,et al.  Failure mode and effects analysis: A community practice perspective , 2017, Journal of applied clinical medical physics.

[122]  Sameer Kumar,et al.  A Modified Delphi Methodology to Conduct a Failure Modes Effects Analysis: A Patient-Centric Effort in a Clinical Medical Laboratory , 2011, Quality management in health care.

[123]  M. Abecassis,et al.  Operating room to intensive care unit handoffs and the risks of patient harm. , 2015, Surgery.

[124]  Carmen Guadalupe Rodriguez-Gonzalez PharmD,et al.  Use of failure mode, effect and criticality analysis to improve safety in the medication administration process , 2015 .

[125]  Hu-Chen Liu,et al.  Human reliability assessment for medical devices based on failure mode and effects analysis and fuzzy linguistic theory , 2014 .

[126]  Howard Lee,et al.  Failure mode and effects analysis drastically reduced potential risks in clinical trial conduct , 2017, Drug design, development and therapy.

[127]  Giancarlo Bizzarri,et al.  Use of FMEA analysis to reduce risk of errors in prescribing and administering drugs in paediatric wards: a quality improvement report , 2012, BMJ Open.

[128]  D. Gupta,et al.  The Use of Failure Mode and Effect Analysis in a Radiation Oncology Setting: The Cancer Treatment Centers of America Experience , 2014, Journal for healthcare quality : official publication of the National Association for Healthcare Quality.

[129]  Zlata Flegar-Meštrić,et al.  Risk analysis of the preanalytical process based on quality indicators data , 2017, Clinical chemistry and laboratory medicine.

[130]  S. Dieterich,et al.  A failure modes and effects analysis study for gynecologic high-dose-rate brachytherapy. , 2015, Brachytherapy.

[131]  Edmundas Kazimieras Zavadskas,et al.  Multiple criteria decision-making techniques in transportation systems: a systematic review of the state of the art literature , 2015 .

[132]  Clayton Dos Santos Moraes,et al.  Assessment of the care process with orthotics, prosthetics and special materials. , 2018, Revista brasileira de enfermagem.

[133]  Rodolfo Valdés,et al.  Application of a risk analysis method to different technologies for producing a monoclonal antibody employed in hepatitis B vaccine manufacturing. , 2012, Biologicals : journal of the International Association of Biological Standardization.

[134]  Milad Shafii,et al.  Failure mode and effect analysis: improving intensive care unit risk management processes. , 2017, International journal of health care quality assurance.

[135]  Faranak Behzadi,et al.  Preventing blood transfusion failures: FMEA, an effective assessment method , 2017, BMC Health Services Research.

[136]  Hu-Chen Liu,et al.  Evaluating the risk of failure modes with extended MULTIMOORA method under fuzzy environment , 2014, Eng. Appl. Artif. Intell..

[137]  Jolene Fox,et al.  Utilization of Failure Mode Effects Analysis in Trauma Patient Registration , 2007, Quality management in health care.

[138]  F Castiglia,et al.  Risk assessment of component failure modes and human errors using a new FMECA approach: application in the safety analysis of HDR brachytherapy , 2014, Journal of radiological protection : official journal of the Society for Radiological Protection.

[139]  A. Carlotti,et al.  Impact of the clinical pharmacist interventions on prevention of pharmacotherapy related problems in the paediatric intensive care unit , 2018, International Journal of Clinical Pharmacy.

[140]  Shinyoung Kim,et al.  The role of failure modes and effects analysis in showing the benefits of automation in the blood bank , 2013, Transfusion.

[141]  M. Arab,et al.  A Case Study on Improving Intensive Care Unit (ICU) Services Reliability: By Using Process Failure Mode and Effects Analysis (PFMEA) , 2016, Global journal of health science.

[142]  Ernesto Iadanza,et al.  Analysis and management of the risks related to the collection, processing and distribution of peripheral blood haematopoietic stem cells. , 2009, Blood transfusion = Trasfusione del sangue.

[143]  Yongtae Park,et al.  A systematic approach for diagnosing service failure: Service-specific FMEA and grey relational analysis approach , 2011, Math. Comput. Model..

[144]  Chao Chung Ho,et al.  Risk management for outsourcing biomedical waste disposal - using the failure mode and effects analysis. , 2014, Waste management.

[145]  Patricia Sorrentino,et al.  Use of Failure Mode and Effects Analysis to Improve Emergency Department Handoff Processes , 2016, Clinical nurse specialist CNS.

[146]  Eric C Ford,et al.  Evaluation of safety in a radiation oncology setting using failure mode and effects analysis. , 2009, International journal of radiation oncology, biology, physics.

[147]  Yongsook C. Lee,et al.  Failure modes and effects analysis for ocular brachytherapy. , 2017, Brachytherapy.

[148]  E. Brown,et al.  Failure mode and effects analysis in a paperless radiotherapy department , 2018, Journal of medical imaging and radiation oncology.

[149]  Yongtae Park,et al.  FMEA-based portfolio approach to service productivity improvement , 2011 .

[150]  Hu-Chen Liu,et al.  FMEA Using Uncertainty Theories and MCDM Methods , 2016 .

[151]  C. Fernández-Llamazares,et al.  RISKS IN THE IMPLEMENTATION AND USE OF SMART PUMPS IN A PEDIATRIC INTENSIVE CARE UNIT: APPLICATION OF THE FAILURE MODE AND EFFECTS ANALYSIS , 2014, International Journal of Technology Assessment in Health Care.

[152]  M. Lozano,et al.  Implementation and evaluation of a gravimetric i.v. workflow software system in an oncology ambulatory care pharmacy. , 2016, American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists.

[153]  Jian-Bo Yang,et al.  Failure mode and effects analysis using a group-based evidential reasoning approach , 2009, Comput. Oper. Res..

[154]  Shu Yamada,et al.  Failure mode and effects analysis in pharmaceutical research , 2010 .

[155]  P. Bonnabry,et al.  Risk and pharmacoeconomic analyses of the injectable medication process in the paediatric and neonatal intensive care units. , 2010, International journal for quality in health care : journal of the International Society for Quality in Health Care.

[156]  Nalinee Chanamool,et al.  Fuzzy FMEA application to improve decision-making process in an emergency department , 2016, Appl. Soft Comput..

[157]  Yuanyuan Jiang,et al.  Application of failure mode and effects analysis in a clinical chemistry laboratory. , 2015, Clinica chimica acta; international journal of clinical chemistry.

[158]  Roberta Maggiulli,et al.  Failure mode and effects analysis of witnessing protocols for ensuring traceability during IVF. , 2015, Reproductive biomedicine online.

[159]  Sara Broggi,et al.  Application of failure mode and effects analysis (FMEA) to pretreatment phases in tomotherapy , 2013, Journal of applied clinical medical physics.

[160]  Afshin Jamshidi,et al.  Using Fuzzy Cost‐Based FMEA, GRA and Profitability Theory for Minimizing Failures at a Healthcare Diagnosis Service , 2015, Qual. Reliab. Eng. Int..

[161]  J. Holl,et al.  Risk assessment of the hospital discharge process of high-risk patients with diabetes , 2018, BMJ open quality.