Numerical analysis of two-phase nanofluid flow on the thermal efficiency of a circular heat sink for cooling of LEDs

[1]  M. Sharifpur,et al.  Economic and thermo-hydraulic features of multiphase nanofluids in a heat exchanger equipped with novel turbulators: A numerical study , 2022, Engineering Analysis with Boundary Elements.

[2]  Qiuwan Wang,et al.  Heat transfer analysis of phase change material composited with metal foam-fin hybrid structure in inclination container by numerical simulation and artificial neural network , 2022, Energy Reports.

[3]  M. Sharifpur,et al.  Numerical Analysis of the Effect of Nanoparticles Size and Shape on the Efficiency of a Micro Heatsink , 2022, Nanomaterials.

[4]  Z. Said,et al.  Tribology of enhanced turning using biolubricants: A comparative assessment , 2022, Tribology International.

[5]  Z. Said,et al.  Electrostatic atomization minimum quantity lubrication machining: from mechanism to application , 2022, International Journal of Extreme Manufacturing.

[6]  M. Rawa,et al.  Numerical study of simultaneous use of non-Newtonian hybrid nano-coolant and thermoelectric system in cooling of lithium-ion battery and changes in the flow geometry , 2022, Journal of Power Sources.

[7]  Yu Jiang,et al.  A study of nanoparticle shape in water/alumina/boehmite nanofluid flow in the thermal management of a lithium-ion battery under the presence of phase-change materials , 2022, Journal of Power Sources.

[8]  M. Sharifpur,et al.  Numerical investigation and optimization of natural convection and entropy generation of alumina/H2O nanofluid in a rectangular cavity in the presence of a magnetic field with artificial neural networks , 2022, Engineering Analysis with Boundary Elements.

[9]  B. Jamil,et al.  Investigation of thermal entropy generation and nanofluid flow in a new heatsink with effect of nanoparticles shape , 2022, Case Studies in Thermal Engineering.

[10]  Xudong Li,et al.  Triggering Ambient Polymer-based Li-O2 Battery via Photo-electro-thermal Synergy , 2022, Nano Energy.

[11]  Qiuwan Wang,et al.  Heat transfer of granular flow around aligned tube bank in moving bed: Experimental study and theoretical prediction by thermal resistance model , 2022, Energy Conversion and Management.

[12]  Z. Azizi,et al.  Design-expert aided thermohydraulic assessment of a nanofluid-cooled cylindrical microchannel heat sink: Possible application for thermal management of electric vehicle batteries , 2022, Sustainable Energy Technologies and Assessments.

[13]  F. Selimefendigil,et al.  Thermal management for conjugate heat transfer of curved solid conductive panel coupled with different cooling systems using non-Newtonian power law nanofluid applicable to photovoltaic panel systems , 2022, International Journal of Thermal Sciences.

[14]  Alireza Moradikazerouni.  Experimental and numerical investigation of traveling wave tube radial heat sink connector thermal stress and deformation with a focus on energy cost management , 2022, International Communications in Heat and Mass Transfer.

[15]  Qiuwan Wang,et al.  Experimental Study on Heat Transfer Performance of Sco2 Near Pseudo-Critical Point in Airfoil-Fin Pche from Viewpoint of Average Thermal-Resistance Ratio , 2022, SSRN Electronic Journal.

[16]  Karim Egab,et al.  Thermal management analysis of li-ion battery-based on cooling system using dimples with air fins and perforated fins , 2022 .

[17]  F. Selimefendigil,et al.  Impacts of using an elastic fin on the phase change process under magnetic field during hybrid nanoliquid convection through a PCM-packed bed system , 2021, International Journal of Mechanical Sciences.

[18]  M. Sheremet,et al.  Impact of hybrid nanofluids on MHD flow and heat transfer near a vertical plate with ramped wall temperature , 2021 .

[19]  D. Toghraie,et al.  Modeling and estimation of thermal performance factor of MgO-water nanofluids flow by artificial neural network based on experimental data , 2021, Case Studies in Thermal Engineering.

[20]  F. Selimefendigil,et al.  Thermal management and performance improvement by using coupled effects of magnetic field and phase change material for hybrid nanoliquid convection through a 3D vented cylindrical cavity , 2021, International Journal of Heat and Mass Transfer.

[21]  T. Siegmund,et al.  Experimental investigation on cooling of prismatic battery cells through cell integrated features , 2021, Energy.

[22]  Xingquan Liu,et al.  Laboratory study and field application of amphiphilic molybdenum disulfide nanosheets for enhanced oil recovery , 2021, Journal of Petroleum Science and Engineering.

[23]  W. Jamshed,et al.  Thermal examination of renewable solar energy in parabolic trough solar collector utilizing Maxwell nanofluid: A noble case study , 2021 .

[24]  M. Sheikholeslami,et al.  Numerical investigation of heat transfer enhancement using (Fe3O4 and Ag-H2O) nanofluids in (converge-diverge) mini-channel heat sinks , 2021, Materials Today: Proceedings.

[25]  E. Mahmoud,et al.  Investigating the thermal efficiency and pressure drop of a nanofluid within a micro heat sink with a new circular design used to cool electronic equipment , 2021, Chemical Engineering Communications.

[26]  S. Mahmud,et al.  Experimental investigation of thermoelectric cooling for a new battery pack design in a copper holder , 2021 .

[27]  E. Mahmoud,et al.  Evaluating the efficiency of pin–fin micro-heat sink considering different shapes of nanoparticle based on exergy analysis , 2021, Journal of Thermal Analysis and Calorimetry.

[28]  E. Mahmoud,et al.  Numerical simulation and exergy analysis of a novel nanofluid-cooled heat sink , 2021, Journal of Thermal Analysis and Calorimetry.

[29]  P. Kosinski,et al.  Use of biodegradable colloids and carbon black nanofluids for solar energy applications , 2021 .

[30]  Behzad Heidarshenas,et al.  An investigation on exergy in a wavy wall microchannel heat sink by using various nanoparticles in fluid flow: two-phase numerical study , 2021, Journal of Thermal Analysis and Calorimetry.

[31]  M. H. Doranehgard,et al.  Experimental study of a hemispherical three-dimensional solar collector operating with silver-water nanofluid , 2021 .

[32]  M. R. Muhammad,et al.  Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids , 2021, Energy.

[33]  Nader Karimi,et al.  Selecting the best nanofluid type for A photovoltaic thermal (PV/T) system based on reliability, efficiency, energy, economic, and environmental criteria , 2021, Journal of the Taiwan Institute of Chemical Engineers.

[34]  Abdulwahab A. Alnaqi,et al.  Thermal-hydraulic analysis and irreversibility of the MWCNTs-SiO2/EG-H2O non-Newtonian hybrid nanofluids inside a zigzag micro-channels heat sink , 2021 .

[35]  Yongbing Tang,et al.  Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries , 2020, National science review.

[36]  A. Shahsavar,et al.  The entropy generation analysis of forward and backward laminar water flow in a plate-pin-fin heatsink considering three different splitters , 2020 .

[37]  Aysan Shahsavar Goldanlou,et al.  A techno-economic investigation of 2D and 3D configurations of fins and their effects on heat sink efficiency of MHD hybrid nanofluid with slip and non-slip flow , 2020 .

[38]  M. Dahari,et al.  Second law analysis of hybrid nanofluid flow in a microchannel heat sink integrated with ribs and secondary channels for utilization in miniature thermal devices , 2020 .

[39]  Hussain Ahmed Tariq,et al.  Hydro-thermal performance of normal-channel facile heat sink using TiO2-H2O mixture (Rutile–Anatase) nanofluids for microprocessor cooling , 2020, Journal of Thermal Analysis and Calorimetry.

[40]  M. Goodarzi,et al.  Configuration and Optimization of a Minichannel Using Water–Alumina Nanofluid by Non-Dominated Sorting Genetic Algorithm and Response Surface Method , 2020, Nanomaterials.

[41]  Yuying Yan,et al.  Experimental study on thermal efficiency improvement using nanofluids in heat sink with heated circular cylinder , 2020 .

[42]  M. Sharifpur,et al.  Effects of uniform magnetic induction on heat transfer performance of aqueous hybrid ferrofluid in a rectangular cavity , 2020 .

[43]  H. Moayedi,et al.  Irreversibility characteristics of a modified microchannel heat sink operated with nanofluid considering different shapes of nanoparticles , 2020 .

[44]  Jun Wang,et al.  Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions , 2019, Ceramics International.

[45]  A. Al-Rashed,et al.  Numerical investigation of non-Newtonian water-CMC/CuO nanofluid flow in an offset strip-fin microchannel heat sink: Thermal performance and thermodynamic considerations , 2019, Applied Thermal Engineering.

[46]  Naiqing Zhang,et al.  Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air , 2018 .

[47]  Hui‐Ming Cheng,et al.  Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage , 2018, Nature Chemistry.

[48]  Dongzhou Jia,et al.  Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms , 2017 .

[49]  Dongzhou Jia,et al.  Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions , 2017 .

[50]  Yong Tang,et al.  Thermal management of high-power LEDs based on integrated heat sink with vapor chamber , 2017 .

[51]  Fan Zhang,et al.  A Novel Potassium‐Ion‐Based Dual‐Ion Battery , 2017, Advanced materials.

[52]  Maohua Sheng,et al.  Carbon‐Coated Porous Aluminum Foil Anode for High‐Rate, Long‐Term Cycling Stability, and High Energy Density Dual‐Ion Batteries , 2016, Advanced materials.

[53]  G. Rosengarten,et al.  Nanofluids to improve the performance of PEM fuel cell cooling systems: A theoretical approach , 2016 .

[54]  Grzegorz Dzido,et al.  Investigation on the CPU nanofluid cooling , 2016, Microelectron. Reliab..

[55]  Chun‐Sing Lee,et al.  Dual‐Ion Batteries: A Novel Aluminum–Graphite Dual‐Ion Battery (Adv. Energy Mater. 11/2016) , 2016 .

[56]  Lixia Sun,et al.  Simulation and evaluation of the peak temperature in LED light bulb heatsink , 2016, Microelectron. Reliab..

[57]  Kwan-Soo Lee,et al.  Optimization of a chimney design for cooling efficiency of a radial heat sink in a LED downlight , 2016 .

[58]  Dongzhou Jia,et al.  Experimental Evaluation of the Lubrication Performance of MoS2/CNT Nanofluid for Minimal Quantity Lubrication in Ni-based Alloy Grinding , 2015 .

[59]  Vajiheh Sabeti,et al.  Optimization of a novel combined cooling, heating and power cycle driven by geothermal and solar energies using the water/CuO (copper oxide) nanofluid , 2015 .

[60]  Arun Kumar Tiwari,et al.  Progress of nanofluid application in solar collectors: A review , 2015 .

[61]  B. Sivaraman,et al.  Thermal Performance of Solar Parabolic Trough Collector Using Nanofluids and the Absorber with Nail Twisted Tapes Inserts , 2015 .

[62]  Kazuyuki Sugimura,et al.  Multi-objective optimization of water-cooled pinfin heatsinks , 2015 .

[63]  I. Pop,et al.  A review of the applications of nanofluids in solar energy , 2013 .

[64]  K. Khanafer,et al.  A critical synthesis of thermophysical characteristics of nanofluids , 2011 .

[65]  T. Teng,et al.  The effect of alumina/water nanofluid particle size on thermal conductivity , 2010 .