Structural identification and evaluation for SHM applications

Optimal condition monitoring, maintenance and management of the existing civil infrastructure have been identified as a critical factor in ensuring and raising the economic productive capacity. Direct in-service structural health monitoring and vibration behaviour measurement data are essential to provide more accurate performance assessment and capacity estimation. The main focus of this special issue, organised by Australian Network of Structural Health Monitoring (ANSHM), is to present recent developments and applications of innovative techniques for structural modelling, structural identification with uncertainties, data interpretation for structural performance prediction and reserve capacity evaluation.

[1]  Guilherme Ferreira Gomes,et al.  A numerical–experimental study for structural damage detection in CFRP plates using remote vibration measurements , 2018 .

[2]  Tommy H.T. Chan,et al.  Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge : Background and experimental observation , 2006 .

[3]  Ting-Hua Yi,et al.  Monitoring-based analysis of the static and dynamic characteristic of wind actions for long-span cable-stayed bridge , 2018 .

[4]  Colin Christopher Caprani,et al.  Formulation of human-structure interaction system models for vertical vibration , 2016 .

[5]  Xinqun Zhu,et al.  Condition assessment of heritage timber buildings in operational environments , 2017 .

[6]  Hossein Rahnema,et al.  3D numerical modeling of multi-channel analysis of surface wave in homogeneous and layered concrete slabs , 2018 .

[7]  David P. Thambiratnam,et al.  Structural health monitoring in Australia , 2011 .

[8]  Hong Hao,et al.  Damage detection in bridge structures under moving loads with phase trajectory change of multi-type vibration measurements , 2017 .

[9]  Colin Christopher Caprani,et al.  Safety Assessment of the Antisliding between the Main Cable and Middle Saddle of a Three-Pylon Suspension Bridge Considering Traffic Load Modeling , 2016 .

[10]  Cong Zhou,et al.  Efficient hysteresis loop analysis-based damage identification of a reinforced concrete frame structure over multiple events , 2017 .

[11]  L. Michalcová,et al.  Composite panel structural health monitoring and failure analysis under compression using acoustic emission , 2018, Journal of Civil Structural Health Monitoring.

[12]  X. W. Ye,et al.  Analysis of non-stationary wind characteristics at an arch bridge using structural health monitoring data , 2017 .

[13]  Andrei Kotousov,et al.  Effect of central and non-central frequency components on the quality of damage imaging , 2018 .

[14]  Jun Li,et al.  A review of recent research advances on structural health monitoring in Western Australia , 2016 .

[15]  Purnachandra Saha,et al.  Structural health monitoring techniques implemented on IASC–ASCE benchmark problem: a review , 2018, Journal of Civil Structural Health Monitoring.

[16]  Nasim Uddin,et al.  “Drive-by’’ bridge frequency-based monitoring utilizing wavelet transform , 2017 .

[17]  David P. Thambiratnam,et al.  Modelling techniques for structural evaluation for bridge assessment , 2018 .