Investigation on the effects of laser power and scanning speed on polypropylene diode transmission welds

Diode laser transmission welding was well established as a leading technique for industrial applications of joining plastics. The weld soundness of plastics depends on several variables like the non-isothermal crystallization, the germs growth rate, the dimensions of the heat-affected zone induced by recrystallization. Firstly, this paper proves the reliability of a numerical model based on the finite difference method at calculating the soundness variables for diode laser welding of polypropylene thermoplastic polymer. The numerical model was validated by microscopy observation of experimental polypropylene welds. Then a parametric study on the effects of the laser power and welding speed on the weld soundness variables is presented through a number of plots of the main process variables against time. The overall investigation gives a detailed picture of the influence of laser power and welding speed on the weld soundness from a microstructure point of view.

[1]  D. Yan,et al.  Crystallization behavior of partially melting isotactic polypropylene , 2001 .

[2]  Pradip Majumdar,et al.  A Green’s function model for the analysis of laser heating of materials , 2007 .

[3]  Yasuo Kurosaki,et al.  Radiative heat transfer in plastic welding process , 2005 .

[4]  J. Kneip,et al.  Heat transfer in semi-transparent materials during laser interaction , 2004 .

[5]  E. Haberstroh,et al.  Laser welding of micro plastic parts , 2007, SPIE LASE.

[6]  M. Abreu,et al.  High-speed laser welding of plastic films , 2000 .

[7]  Friedrich G. Bachmann,et al.  Industrial applications of high power diode lasers in materials processing , 2003 .

[8]  Peter J. Martin,et al.  Modeling of non-isothermal crystallization kinetics of isotactic polypropylene , 2001 .

[9]  G. Herziger,et al.  IR lasers as tools for the future , 1995 .

[10]  Giuseppe Casalino,et al.  Laser diode transmission welding of polypropylene: Geometrical and microstructure characterisation of weld , 2009 .

[11]  A. Boglea,et al.  Fibre laser welding for packaging of disposable polymeric microfluidic-biochips , 2007 .

[12]  Giuseppe Casalino,et al.  Numerical model of CO2 laser welding of thermoplastic polymers , 2008 .

[13]  H. Potente,et al.  Laser Transmission Welding of Thermoplastics: Analysis of the Heating Phase , 1999 .

[14]  C. Albano,et al.  Application of different macrokinetic models to the isothermal crystallization of PP/talc blends , 2003 .

[15]  D. V. Krevelen.  Properties of Polymers , 1990 .

[16]  Giuseppe Titomanlio,et al.  Crystallization kinetics and solidified structure in iPP under high cooling rates , 2003 .

[17]  Reinaldo Jose Gonzalez,et al.  Temperature and crystallinity profiles in polyolefines isothermal and non-isothermal solidification processes , 2003 .