Drilling of filament wound hybrid composite tubes: An experimental study

[1]  Şakir Yazman.  The effects of back-up on drilling machinability of filament wound GFRP composite pipes: Mechanical characterization and drilling tests , 2021, Journal of Manufacturing Processes.

[2]  Şakir Yazman,et al.  The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality , 2020 .

[3]  H. Heidary,et al.  Parametric study on drilling of GFRP composite pipe produced by filament winding process in different backup condition , 2020 .

[4]  F. Zemzemi,et al.  Orthogonal cutting of UD-CFRP using multiscale analysis: Finite element modeling , 2020 .

[5]  A. Ghasemi,et al.  Parametric analysis of delamination in GFRP composite profiles by performing rotary ultrasonic drilling approach: Experimental and statistical study , 2019, Composites Part B: Engineering.

[6]  Lokman Gemi,et al.  An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation , 2019, Composites Part B: Engineering.

[7]  H. Hocheng,et al.  Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis , 2018, Composite Structures.

[8]  R. Zitoune,et al.  Experimental and numerical investigation of adhesively bonded ±55° filament wound tubular specimens under internal pressure , 2018, Engineering Fracture Mechanics.

[9]  Kamel Mehdi,et al.  Numerical modeling and experimental analysis of thrust cutting force and torque in drilling process of titanium alloy Ti6Al4V , 2018 .

[10]  Eric Dimla,et al.  Recent advances in twist drill design for composite machining: A critical review , 2017 .

[11]  N. Tarakçıoğlu,et al.  Enhanced fatigue behavior under internal pressure of CNT reinforced filament wound cracked pipes , 2017 .

[12]  R. Zitoune,et al.  Experimental and numerical study of adhesively bonded ±55° filament wound tubular specimens under uniaxial tensile loading , 2017 .

[13]  Roham Rafiee,et al.  Stochastic fatigue analysis of glass fiber reinforced polymer pipes , 2017 .

[14]  H. Hocheng,et al.  Utilizing internal icing force to reduce delamination in drilling composite tubes , 2016 .

[15]  R. Rafiee,et al.  Modeling and experimental evaluation of functional failure pressures in glass fiber reinforced polyester pipes , 2014 .

[16]  Ated Ben Khalifa,et al.  Mechanical characterization of glass/vinylester ±55° filament wound pipes by acoustic emission under axial monotonic loading , 2012 .

[17]  Theodoro A. Netto,et al.  Structural and functional failure pressure of filament wound composite tubes , 2012 .

[18]  Redouane Zitoune,et al.  Study of drilling of composite material and aluminium stack , 2010 .

[19]  I. El-Sonbaty,et al.  Machinability analysis in drilling woven GFR/epoxy composites: Part I – Effect of machining parameters , 2010 .

[20]  Onur Sayman,et al.  Burst failure load of composite pressure vessels , 2009 .

[21]  A. Avci,et al.  Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure , 2008 .

[22]  J. Paulo Davim,et al.  Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor , 2008 .

[23]  P. Mallick,et al.  Fiber-reinforced composites : materials, manufacturing, and design , 2007 .

[24]  A. Avci,et al.  Fatigue behavior of surface cracked filament wound pipes with high tangential strength in corrosive environment , 2007 .

[25]  J. Paulo Davim,et al.  Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up , 2004 .

[26]  F. Shen.  A filament-wound structure technology overview , 1995 .

[27]  Hong Hocheng,et al.  Delamination During Drilling in Composite Laminates , 1990 .

[28]  K. Palanikumar,et al.  Influence of Tool Materials on Thrust Force and Delamination in Drilling Sisal-glass Fiber Reinforced Polymer (S-GFRP) Composites , 2014 .

[29]  S. M. Sapuan,et al.  Design and fabrication of low cost filament winding machine , 2007 .

[30]  Philippe Bompard,et al.  Mechanical behaviour of ± 55 ° filament-wound glass-fibre/epoxy-resin tubes: I. Microstructural analyses, mechanical behaviour and damage mechanisms of composite tubes under pure tensile loading, pure internal pressure, and combined loading , 1997 .

[31]  W. König,et al.  Machining of Fibre Reinforced Plastics , 1985 .