Three-dimensional printing of freeform helical microstructures: a review.
暂无分享,去创建一个
[1] Jean-Charles Bolomey,et al. Analysis of Dual-Band Helical Antenna for Diversity on Mobile Phones , 2009, Wirel. Pers. Commun..
[2] Mohsen A. Jafari,et al. Processing of advanced electroceramic components by fused deposition technique , 2001 .
[3] Martin Wegener,et al. Three‐Dimensional Bi‐Chiral Photonic Crystals , 2009 .
[4] Robert Puers,et al. Focused ion beam induced deposition: fabrication of three-dimensional microstructures and Young's modulus of the deposited material , 2000 .
[5] Qing Yang,et al. Facile fabrication of true three-dimensional microcoils inside fused silica by a femtosecond laser , 2012, Journal of Micromechanics and Microengineering.
[6] John A. Rogers,et al. Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.
[7] Sheng Liu,et al. Single-walled carbon nanotube network/poly composite thin film for flow sensor , 2010 .
[8] Daniel Therriault,et al. Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. , 2014, Langmuir : the ACS journal of surfaces and colloids.
[9] Qinglin Sheng,et al. A sandwich-type phenolic biosensor based on tyrosinase embedding into single-wall carbon nanotubes and polyaniline nanocomposites , 2013 .
[10] Koji Ikuta,et al. A three-dimensional microfabrication system for biodegradable polymers with high resolution and biocompatibility , 2008 .
[11] Paul Crozat,et al. Two- and three-dimensional microcoil fabrication process for three-axis magnetic sensors on flexible substrates , 2006 .
[12] C. Christodoulou,et al. 3-D helical THz antennas , 2000 .
[13] J. Lewis,et al. Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces , 2011, Advanced materials.
[14] Masanori Komuro,et al. Three-dimensional nanostructure fabrication by focused-ion-beam chemical vapor deposition , 2000 .
[15] J. Lewis,et al. Phase behavior and rheological properties of polyelectrolyte inks for direct-write assembly. , 2005, Langmuir : the ACS journal of surfaces and colloids.
[16] J. Lewis,et al. Fugitive Inks for Direct‐Write Assembly of Three‐Dimensional Microvascular Networks , 2005 .
[17] A. Amis,et al. Rapid prototyping techniques for anatomical modelling in medicine. , 1997, Annals of the Royal College of Surgeons of England.
[18] Ahmad Safari,et al. Processing of advanced electroceramic components by fused deposition technique , 2001 .
[19] Jean-Pierre Kruth,et al. Composites by rapid prototyping technology , 2010 .
[20] D. Therriault,et al. Solvent-cast three-dimensional printing of multifunctional microsystems. , 2013, Small.
[21] N. Hu,et al. Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .
[22] J. Cesarano,et al. Directed colloidal assembly of 3D periodic structures , 2002 .
[23] K. Leong,et al. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.
[24] Mark A. Ganter,et al. A review of process development steps for new material systems in three dimensional printing (3DP) , 2008 .
[25] Daniel Therriault,et al. Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils , 2010, Advanced materials.
[26] Caroline Sunyong Lee,et al. Measurement of anisotropic compressive strength of rapid prototyping parts , 2007 .
[27] Daniel Therriault,et al. Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing , 2014 .
[28] D. Therriault,et al. Helical Dielectrophoretic Particle Separator Fabricated by Conformal Spindle Printing , 2014 .
[29] Robert N. Dean,et al. Novel method for fabricating 3D helical THz antennas directly on semiconductor substrates , 1999, Photonics West.
[30] J. Lewis,et al. Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.
[31] Hejun Du,et al. A 3D paired microelectrode array for accumulation and separation of microparticles , 2006 .
[32] D Therriault,et al. Chaotic mixing in three-dimensioned microvascular networks fabricated by direct-write assembly (vol 2, pg 265, 2002) , 2003 .
[33] M. Kotaki,et al. A review on polymer nanofibers by electrospinning and their applications in nanocomposites , 2003 .
[34] Saeid Nahavandi,et al. Dielectrophoretic-activated cell sorter based on curved microelectrodes , 2010 .
[35] Lina Zhang,et al. Preparation of helical fibers from cellulose–cuprammonium solution based on liquid rope coiling , 2014 .
[36] Paul J. Campagnola,et al. Submicron Multiphoton Free-Form Fabrication of Proteins and Polymers: Studies of Reaction Efficiencies and Applications in Sustained Release , 2000 .
[37] Vivek Subramanian,et al. Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices , 2005, Proceedings of the IEEE.
[38] Pál Ormos,et al. Two-photon polymerization with optimized spatial light modulator , 2011 .
[39] Qing Yang,et al. Fabrication of three-dimensional helical microchannels with arbitrary length and uniform diameter inside fused silica. , 2012, Optics letters.
[40] Satoshi Kawata,et al. Finer features for functional microdevices , 2001, Nature.
[41] A.R. Djordjevic,et al. Optimization of Helical antennas [Antenna Designer's Notebook] , 2006, IEEE Antennas and Propagation Magazine.
[42] Martin Wegener,et al. 3D Bi‐chiral Photonic Crystals: Three‐Dimensional Bi‐Chiral Photonic Crystals (Adv. Mater. 46/2009) , 2009 .
[43] J. Muth,et al. 3D Printing of Free Standing Liquid Metal Microstructures , 2013, Advanced materials.
[44] Min-Feng Yu,et al. Meniscus-Confined Three-Dimensional Electrodeposition for Direct Writing of Wire Bonds , 2010, Science.
[45] H. Fukunaga,et al. A carbon nanotube/polymer strain sensor with linear and anti-symmetric piezoresistivity , 2011 .
[46] Jongbaeg Kim,et al. Batch-processed carbon nanotube wall as pressure and flow sensor , 2010, Nanotechnology.
[47] Ian W. Hunter,et al. Three-dimensional microfabrication by localized electrochemical deposition , 1996 .
[48] Ryan B. Wicker,et al. Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography , 2009 .
[49] Yibing Huang,et al. Role of Helicity on the Anticancer Mechanism of Action of Cationic-Helical Peptides , 2012, International journal of molecular sciences.
[50] Martin Lévesque,et al. Direct-write fabrication of freestanding nanocomposite strain sensors , 2012, Nanotechnology.
[51] Koji Takahashi,et al. Submicroscale Flow Sensor Employing Suspended Hot Film with Carbon Nanotube Fins , 2010 .
[52] C. Decker,et al. Photoinitiated crosslinking polymerisation , 1996 .
[53] J. Lewis,et al. Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly , 2003, Nature materials.
[54] D. Mainwaring,et al. Electromechanical response of semiconducting carbon-polyimide nanocomposite thin films , 2009 .
[55] Behrokh Khoshnevis,et al. Automated construction by contour craftingrelated robotics and information technologies , 2004 .