Control Parameters Design Based on Dynamic Characteristics of a Hybrid Robot With Parallelogram Structures

[1]  Yimin Song,et al.  Elastodynamic Optimization of a 5-DoF Parallel Kinematic Machine Considering Parameter Uncertainty , 2019, IEEE/ASME Transactions on Mechatronics.

[2]  Xin-Jun Liu,et al.  Kinematic optimal design of a 2-degree-of-freedom 3-parallelogram planar parallel manipulator , 2015 .

[3]  Mario Cortese,et al.  A Mechatronic System for Robot-Mediated Hand Telerehabilitation , 2015, IEEE/ASME Transactions on Mechatronics.

[4]  Dong Liang,et al.  Singular-Perturbation-Based Nonlinear Hybrid Control of Redundant Parallel Robot , 2018, IEEE Transactions on Industrial Electronics.

[5]  Rainer Gadow,et al.  Optimized multiaxis robot kinematic for HVOF spray coatings on complex shaped substrates , 2006 .

[6]  Yu Zhu,et al.  Dynamical Model Based Contouring Error Position-Loop Feedforward Control for Multiaxis Motion Systems , 2019, IEEE Transactions on Industrial Informatics.

[7]  Jun Shi,et al.  New method for kinematic analysis of a hybrid manipulator , 2009, 2009 International Conference on Information and Automation.

[8]  Jun Wu,et al.  Review: An overview of dynamic parameter identification of robots , 2010 .

[9]  Fugui Xie,et al.  Dynamic performance analysis of the X4 high-speed pick-and-place parallel robot , 2017 .

[10]  Kotaro Nagaoka,et al.  Model-reference feedforward controller design for high-accuracy contouring control of machine tool axes , 2011 .

[11]  Jing-Shan Zhao,et al.  Structure synthesis and workspace analysis of a telescopic spraying robot , 2019, Mechanism and Machine Theory.

[12]  N. Munro,et al.  PID controllers: recent tuning methods and design to specification , 2002 .

[13]  Tie Fu,et al.  Dynamic Analysis and Structural Optimization of a Novel Palletizing Robot , 2010 .

[14]  Tao Sun,et al.  An Approach to Formulate the Hessian Matrix for Dynamic Control of Parallel Robots , 2019, IEEE/ASME Transactions on Mechatronics.

[15]  Guofang Gong,et al.  Continuous Friction Feedforward Sliding Mode Controller for a TriMule Hybrid Robot , 2018, IEEE/ASME Transactions on Mechatronics.

[16]  Eric Hemmingson.  Palletizing robots for the consumer goods industry , 1998 .

[17]  Marina Valles,et al.  Model-Based Control of a 3-DOF Parallel Robot Based on Identified Relevant Parameters , 2013, IEEE/ASME Transactions on Mechatronics.

[18]  Yunan Prawoto,et al.  Failure Analysis and Life Assessment of Coating: The Use of Mixed Mode Stress Intensity Factors in Coating and Other Surface Engineering Life Assessment , 2011, Journal of Failure Analysis and Prevention.

[19]  Jun Gong,et al.  The Trajectory Optimization of Spray Painting Robot for Conical Surface , 2010 .

[20]  F. Karray,et al.  A Robust Hybrid Intelligent Position/Force Control Scheme for Cooperative Manipulators , 2007, IEEE/ASME Transactions on Mechatronics.

[21]  Liangan Zhang,et al.  Layout analysis and path planning of a robot palletizing production line , 2008, 2008 IEEE International Conference on Automation and Logistics.

[22]  Haiqing Zhang,et al.  Optimum motion control of palletizing robots based on iterative learning , 2012, Ind. Robot.

[23]  Liu Jinhao.  Research and Application Situation,Problems and Solutions of Palletizing Robots , 2011 .

[24]  Zeng Yong,et al.  Tool Trajectory Optimization of Spray Painting Robot for Composite Conical Surfaces , 2012 .

[25]  Haibin Duan,et al.  Control parameter design for automatic carrier landing system via pigeon-inspired optimization , 2016 .

[26]  Chun-Liang Lin,et al.  Parameter design for a guidance and control system using genetic approach , 2001 .

[27]  Yimin Song,et al.  Kinematic Calibration of Serial and Parallel Robots Based on Finite and Instantaneous Screw Theory , 2020, IEEE Transactions on Robotics.

[28]  Jun Wu,et al.  Mechatronics modeling and vibration analysis of a 2-DOF parallel manipulator in a 5-DOF hybrid machine tool , 2018 .

[29]  Wu Jun,et al.  Workspace and dynamic performance evaluation of the parallel manipulators in a spray-painting equipment , 2017 .