The effect of length and concentration of glass fibers on the mechanical properties of an injection- and a compression-molded denture base polymer.

[1]  H Helenius,et al.  Clinical survey of acrylic resin removable denture repairs with glass-fiber reinforcement. , 2001, The International journal of prosthodontics.

[2]  K. Inoue,et al.  Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. , 2000, Dental materials : official publication of the Academy of Dental Materials.

[3]  D. Jagger,et al.  The effect of chopped poly(methyl methacrylate) fibers on some properties of acrylic resin denture base material. , 1999, The International journal of prosthodontics.

[4]  R E Ogle,et al.  Comparison of accuracy between compression- and injection-molded complete dentures. , 1999, The Journal of prosthetic dentistry.

[5]  T. Tinçer,et al.  Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin. , 1999, The Journal of prosthetic dentistry.

[6]  P. Vallittu.  Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers. , 1999, The Journal of prosthetic dentistry.

[7]  H. D. Stipho.  Repair of acrylic resin denture base reinforced with glass fiber. , 1998, The Journal of prosthetic dentistry.

[8]  H. D. Stipho.  Effect of glass fiber reinforcement on some mechanical properties of autopolymerizing polymethyl methacrylate. , 1998, The Journal of prosthetic dentistry.

[9]  K. Chung,et al.  Flexural strength of a provisional resin material with fibre addition. , 1998, Journal of oral rehabilitation.

[10]  P. Vallittu.  Some aspects of the tensile strength of undirectional glass fibre-polymethyl methacrylate composite used in dentures. , 1998, Journal of oral rehabilitation.

[11]  P. Vallittu.  The effect of glass fiber reinforcement on the fracture resistance of a provisional fixed partial denture. , 1998, The Journal of prosthetic dentistry.

[12]  P. Vallittu,et al.  Impact strength of a modified continuous glass fiber--poly(methyl methacrylate). , 1997, The International journal of prosthodontics.

[13]  P. Vallittu,et al.  Curing of a silane coupling agent and its effect on the transverse strength of autopolymerizing polymethylmethacrylate-glass fibre composite. , 1997, Journal of oral rehabilitation.

[14]  P. Vallittu,et al.  A review of fiber-reinforced denture base resins. , 1996, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[15]  P. Vallittu.  Comparison of the in vitro fatigue resistance of an acrylic resin removable partial denture reinforced with continuous glass fibers or metal wires. , 1996, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[16]  P. Vallittu.  The effect of void space and polymerization time on transverse strength of acrylic-glass fibre composite. , 1995, Journal of oral rehabilitation.

[17]  S. Aquilino,et al.  Effect of polyethylene fiber reinforcement on the strength of denture base resins polymerized by microwave energy. , 1994, The Journal of prosthetic dentistry.

[18]  P. Vallittu.  Acrylic resin-fiber composite--Part II: The effect of polymerization shrinkage of polymethyl methacrylate applied to fiber roving on transverse strength. , 1994, The Journal of prosthetic dentistry.

[19]  R. Lappalainen,et al.  Acrylic resin-fiber composite--Part I: The effect of fiber concentration on fracture resistance. , 1994, The Journal of prosthetic dentistry.

[20]  R Huggett,et al.  Denture fracture--a survey , 1994, British Dental Journal.

[21]  R. Lappalainen,et al.  Transverse strength and fatigue of denture acrylic-glass fiber composite. , 1994, Dental materials : official publication of the Academy of Dental Materials.

[22]  T. Chow,et al.  Polyethylene fibre reinforced poly(methylmethacrylate)--water sorption and dimensional changes during immersion. , 1993, Journal of dentistry.

[23]  J. McCabe,et al.  Impact strength of acrylic resin denture base materials with surface defects. , 1993, Dental materials : official publication of the Academy of Dental Materials.

[24]  P. Vallittu.  Comparison of two different silane compounds used for improving adhesion between fibres and acrylic denture base material. , 1993, Journal of oral rehabilitation.

[25]  I. Ward,et al.  Acrylic resin reinforced with chopped high performance polyethylene fiber--properties and denture construction. , 1993, Dental materials : official publication of the Academy of Dental Materials.

[26]  I. Ward,et al.  Acrylic resins reinforced with woven highly drawn linear polyethylene fibres. 3. Mechanical properties and further aspects of denture construction. , 1993, Australian dental journal.

[27]  T. Chow,et al.  Acrylic resins reinforced with highly drawn linear polyethylene woven fibres. 1. Construction of upper denture bases. , 1992, Australian dental journal.

[28]  A. Zissis,et al.  Dimensional accuracy and stability of acrylic resin denture bases. , 1992, The Journal of prosthetic dentistry.

[29]  P. Vallittu,et al.  Reinforcement of acrylic resin denture base material with metal or fibre strengtheners. , 1992, Journal of oral rehabilitation.

[30]  L. Breeding,et al.  The transverse strengths of three denture base resins reinforced with polyethylene fibers. , 1992, The Journal of prosthetic dentistry.

[31]  G. Solnit.  The effect of methyl methacrylate reinforcement with silane-treated and untreated glass fibers. , 1991, The Journal of prosthetic dentistry.

[32]  J. Young,et al.  Fracture resistance of Kevlar-reinforced poly(methyl methacrylate) resin: a preliminary study. , 1990, The International journal of prosthodontics.

[33]  D. L. Gutteridge.  The effect of including ultra-high-modulus polyethylene fibre on the impact strength of acrylic resin , 1988, British Dental Journal.

[34]  I. Ward,et al.  Denture base poly(methyl methacrylate) reinforced with ultra-thin modulus polyethylene fibers , 1988, British Dental Journal.

[35]  N. Yazdanie,et al.  Carbon fiber acrylic resin composite: an investigation of transverse strength. , 1985, The Journal of prosthetic dentistry.

[36]  Mullarky Rh.  Aramid fiber reinforcement of acrylic appliances. , 1985 .

[37]  J. McCabe,et al.  Applied Dental Materials , 1985 .

[38]  Vishu Shah,et al.  Handbook of Plastics Testing Technology , 1984 .

[39]  T. Manley,et al.  Denture bases reinforced with carbon fibres , 1979, British Dental Journal.

[40]  C. Schreiber.  Polymethylmethacrylate reinforced with carbon fibres , 1971, British Dental Journal.

[41]  Hargreaves As.  The prevalence of fractured dentures. A survey. , 1969 .

[42]  San-Yue Chen,et al.  Reinforcement of acrylic denture base resin by incorporation of various fibers. , 2001, Journal of biomedical materials research.

[43]  P. Vallittu,et al.  Release of residual methyl methacrylate into water from glass fibre-poly(methyl methacrylate) composite used in dentures. , 1997, Biomaterials.

[44]  P. Vallittu,et al.  Impact strength of denture polymethyl methacrylate reinforced with continuous glass fibers or metal wire. , 1995, Acta odontologica Scandinavica.

[45]  S G Vermilyea,et al.  The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins. , 1984, The Journal of prosthetic dentistry.

[46]  S. Svendsen,et al.  Flexural properties of denture base polymers. , 1980, The Journal of prosthetic dentistry.