Design of a capacitance sensor for void fraction measurement in annular flows through a vertical pipe

This work develops simple capacitance sensors which can measure the void fraction in the annular flow of a vertical pipe. In this work plate- and ring-type sensors are considered. For the determination of the optimal gap size for each sensor type, several numerical tests are performed and numerical results show that the angle of the gap between 1 and 1.5 rad gives more outstanding performance than others for the plate-type sensor, and in the case of the ring-type sensor the larger gap distance to radius ratio gives better result. Additionally, these numerical trends are successfully compared with static phantom experiments.

[1]  John R. Thome,et al.  Interfacial Measurements in Stratified Types of Flow, Part I: New Optical Measurement Technique and Dry Angle Measurements , 2004 .

[2]  Vittorio Ferrari,et al.  Capacitance sensor for hold-up measurement in high-viscous-oil/conductive-water core-annular flows , 2011 .

[3]  Bruno Bauwens,et al.  Probabilistic mapping of adiabatic horizontal two-phase flow by capacitance signal feature clustering , 2009 .

[4]  Margaritis Kostoglou,et al.  A conductance probe for measuring liquid fraction in pipes and packed beds , 1992 .

[5]  Charles B. Weinberger,et al.  A simple capacitance sensor for void fraction measurement in two-phase flow , 1982 .

[6]  Marco Fossa,et al.  Design and performance of a conductance probe for measuring the liquid fraction in two-phase gas-liquid flows , 1998 .

[7]  M. Sami A. Abouelwafa,et al.  The Use of Capacitance Sensors for Phase Percentage Determination in Multiphase Pipelines , 1980, IEEE Transactions on Instrumentation and Measurement.

[8]  A. Kendoush.  A comparative study of the various nuclear radiations used for void fraction measurements , 1992 .

[9]  E. A. Hammer,et al.  Capacitance sensor design for reducing errors in phase concentration measurements , 1998 .

[10]  W. Ahmed,et al.  Capacitance Sensors for Void-Fraction Measurements and Flow-Pattern Identification in Air–Oil Two-Phase Flow , 2006, IEEE Sensors Journal.

[11]  K. S. Rezkallah,et al.  Flow regime identification in microgravity two-phase flows using void fraction signals , 1999 .

[12]  Asok Ray,et al.  RAPID COMMUNICATION: Void fraction measurement in two-phase flow processes via symbolic dynamic filtering of ultrasonic signals , 2009 .

[13]  John R. Thome,et al.  Interfacial measurements in stratified types of flow. Part II: Measurements for R-22 and R-410A , 2004 .

[14]  Hongjian Zhang,et al.  Gas–oil two-phase flow measurement using an electrical capacitance tomography system and a Venturi meter , 2005 .

[15]  K. S. Rezkallah,et al.  Statistical analysis of void fluctuations in gas-liquid flows under 1 - g and μ - g conditions using a capacitance sensor , 1997 .

[16]  Sin Kim,et al.  An approximate formula for the capacitance–void fraction relationship for annular flows , 2009 .

[17]  Arnout Willockx,et al.  Capacitance signal analysis of horizontal two-phase flow in a small diameter tube , 2008 .

[18]  J. C. Borst,et al.  A CAPACITANCE SENSOR FOR TWO-PHASE VOID FRACTION MEASUREMENT AND FLOW PATTERN IDENTIFICATION , 1988 .

[19]  Kamiel S. Rezkallah,et al.  Void fraction measurements in gas - liquid flows using capacitance sensors , 1996 .

[20]  Qi Chen,et al.  Visualization of Flow Pattern in Thermosyphon by ECT , 2007 .