Thermoplastic Elastomer Composites of Palm Ash-Filled Ethylene Vinyl Acetate/Natural Rubber Blends: Effects of Palm Ash Loading and Size

Thermoplastic elastomer composites of ethylene vinyl acetate (EVA)/natural rubber (NR) blends filled with palm ash were prepared by melt-mixing using a Haake Rheomix Polydrive R600/610 at 120°C with rotor speed of 50 rpm for 10 minutes. Increase in palm ash loading in composites resulted in increase the value of stabilization toque, Young's modulus and swelling resistance of the composites, but decreased the tensile strength and elongation at break. Scanning electron microscope micrographs revealed that higher filler loading resulted in agglomeration of palm ash in the composites. When smaller particle size of palm ash was used, further improvement in tensile strength, elongation at break, swelling resistance and stabilization torque value were observed.

[1]  Z. Ishak,et al.  Oil palm wood flour reinforced epoxidized natural rubber composites: The effect of filler content and size , 1997 .

[2]  U. Ishiaku,et al.  Effect of mixing sequence in the preparation of white rice husk ash filled polypropylene/ethylene-propylene-diene monomer blend , 2000 .

[3]  G. Rempel,et al.  Application of rice husk ash as fillers in the natural rubber industry , 2005 .

[4]  H. Ismail,et al.  The effects of partial replacement of oil palm wood flour by silica and silane coupling agent on properties of natural rubber compounds , 2000 .

[5]  Salmah,et al.  The Effect of Paper Sludge Content and Size on the Properties of Polypropylene (PP)-Ethylene Propylene Diene Terpolymer (EPDM) Composites , 2005 .

[6]  Thomas Lampke,et al.  Plant Fibers as Reinforcement for Green Composites , 2005 .

[7]  A. A. Bakar,et al.  Effects of Chemical Modification of Paper Sludge Filled Polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) Composites , 2005 .

[8]  B. G. Soares,et al.  The use of EVA‐containing mercapto groups in natural rubber‐EVA blends. II. The effect of curing system on mechanical and thermal properties of the blends , 1996 .

[9]  Susan Selke,et al.  Natural Fibers, Biopolymers, and Biocomposites: An Introduction , 2005 .

[10]  W. Yunus,et al.  Natural rubber/poly(ethylene‐co‐vinyl acetate)‐blend‐based nanocomposites , 2006 .

[11]  S. Thongsang,et al.  Effect of NaOH and Si69 treatments on the properties of fly ash/natural rubber composites* , 2006 .

[12]  J. Kidder,et al.  Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films , 2002 .

[13]  Supri,et al.  Effects of dynamic vulcanization and glycidyl methacrylate on properties of recycled poly(vinyl chloride)/acrylonitrile butadiene rubber blends , 2006 .

[14]  Nittaya Rattanasom,et al.  Reinforcement of natural rubber with silica/carbon black hybrid filler , 2007 .

[15]  B. Hameed,et al.  Adsorption of direct dye on palm ash: kinetic and equilibrium modeling. , 2007, Journal of hazardous materials.

[16]  H. Ismail,et al.  A Comparative Study on Processing, Mechanical Properties, Thermo-oxidative Aging, Water Absorption, and Morphology of Rice Husk Powder and Silica Fillers in Polystyrene/Styrene Butadiene Rubber Blends , 2003 .

[17]  B. Yow,et al.  Hygrothermal aging and tensile behavior of injection‐molded rice husk‐filled polypropylene composites , 2001 .

[18]  L. Visconte,et al.  The effect of coupling agent and chemical treatment on rice husk ash‐ filled natural rubber composites , 2000 .

[19]  Sabu Thomas,et al.  Mass transfer characteristics of natural rubber/ethylene vinyl acetate blends , 2003 .

[20]  Richard J. Spontak,et al.  Thermoplastic elastomers: fundamentals and applications , 2000 .

[21]  S. Mohanty,et al.  Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites , 2006 .

[22]  Min-Su Kim,et al.  Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam , 2004 .

[23]  Sabu Thomas,et al.  Effects of blend ratio, crosslinking systems and fillers on the morphology, curing behavior, mechanical properties, and failure mode of acrylonitrile butadiene rubber and poly(ethylene-co-vinyl acetate) blends , 1999 .

[24]  U. Ishiaku,et al.  Mechanical and morphological properties of white rice husk ash filled polypropylene/ethylene‐propylene‐diene terpolymer thermoplastic elastomer composites , 2002 .

[25]  P. Sae-oui,et al.  Use of rice husk ash as filler in natural rubber vulcanizates: In comparison with other commercial fillers , 2002 .