Study of plasma-surface interaction at the GOL-3 facility
暂无分享,去创建一个
A. Vasilyev | S. Polosatkin | A. Arakcheev | A. Arzhannikov | L. Vyacheslavov | A. Burdakov | V. Postupaev | S. Sinitsky | I. Ivanov | K. Kuklin | A. Kasatov | A. Shoshin
[1] Yu. A. Trunev,et al. Observation of dust particles ejected from the tungsten surface by transient heat flux with small-angle scattering of cw laser light , 2017 .
[2] Yu. A. Trunev,et al. In-situ imaging of tungsten surface modification under ITER-like transient heat loads , 2017 .
[3] A. Vasilyev,et al. Modification of preheated tungsten surface after irradiation at the GOL-3 facility , 2016 .
[4] A. A. Vasilyev,et al. Modeling of plasma interaction with first wall in fusion reactor–measuring residual mechanical stresses in tungsten after irradiation at GOL-3 facility , 2016, Journal of Structural Chemistry.
[5] C. Linsmeier,et al. Modeling of crack formation after pulse heat load in ITER-grade tungsten , 2016 .
[6] Yu. A. Trunev,et al. Observation of the tungsten surface damage under ITER-relevant transient heat loads during and after electron beam pulse , 2016 .
[7] Yu. A. Trunev,et al. Observation of dust particles ejected from tungsten surface under impact of intense transient heat load , 2016 .
[8] V. Popov,et al. Heating of tungsten target by intense pulse electron beam , 2016 .
[9] A. Vasilyev,et al. Comparison of tungsten modification after irradiation at different facilities for PSI studies , 2016 .
[10] A. A. Vasilyev,et al. Applications of synchrotron radiation scattering to studies of plasma facing components at Siberian Synchrotron and Terahertz Radiation Centre , 2016 .
[11] Yu. A. Trunev,et al. Novel electron beam based test facility for observation of dynamics of tungsten erosion under intense ELM-like heat loads , 2016 .
[12] V. Popov,et al. Theoretical modeling of shielding for plasma flow and electron beam heating , 2016 .
[13] A. Ivanova,et al. Fast neutron flux analyzer with real-time digital pulse shape discrimination , 2016 .
[14] A. Ivanova,et al. Pulse-signal digitizer for high-temperature plasma diagnostic systems , 2016 .
[15] B. Unterberg,et al. Note: Arc discharge plasma source with plane segmented LaB6 cathode. , 2016, The Review of scientific instruments.
[16] A. Burdakov,et al. Experiments on the transportation of a magnetized plasma stream in the GOL-3 facility , 2016 .
[17] E. N. Sidorov,et al. A spectral system with the spatial resolution for plasma motion detection in the GOL-3 multi-mirror trap , 2016 .
[18] A. Beklemishev,et al. Helical mirrors for active plasma flow suppression in linear magnetic traps , 2016 .
[19] A. Arzhannikov,et al. Studies of high-current relativistic electron beam interaction with gas and plasma in Novosibirsk , 2016 .
[20] S. Krasheninnikov,et al. Vapor shielding models and the energy absorbed by divertor targets during transient events , 2016 .
[21] M. Nagata,et al. Vapor shielding effects on energy transfer from plasma-gun generated ELM-like transient loads to material surfaces , 2016 .
[22] S. Brezinsek,et al. Impact on the deuterium retention of simultaneous exposure of tungsten to a steady state plasma and transient heat cycling loads , 2016 .
[23] C. Linsmeier,et al. Calculation of cracking under pulsed heat loads in tungsten manufactured according to ITER specifications , 2015 .
[24] A. Ivanov,et al. Low energy, high power hydrogen neutral beam for plasma heating. , 2015, The Review of scientific instruments.
[25] A. Beklemishev. Helical plasma thruster , 2015 .
[26] J. Linke,et al. Combined impact of transient heat loads and steady-state plasma exposure on tungsten , 2015 .
[27] J. Linke,et al. Theoretical investigation of crack formation in tungsten after heat loads , 2015 .
[28] X. Duan,et al. Experimental and numerical simulations of ELM-like transient damage behaviors to different grade tungsten and tungsten alloys , 2015 .
[29] S. Polosatkin,et al. Study of the impurity composition and effective plasma charge in the GOL-3 facility , 2015 .
[30] P. Bagryansky,et al. Recent Progress in Studies of Plasma Heating and Stabilization in Axisymmetric Magnetic Mirrors in Novosibirsk , 2015 .
[31] S. S. Harilal,et al. Material ejection and surface morphology changes during transient heat loading of tungsten as plasma-facing component in fusion devices , 2015 .
[32] J. R. Martin-Solis,et al. An ITPA joint experiment to study runaway electron generation and suppression , 2014 .
[33] A. Burdakov,et al. Magnetohydrodynamically stable plasma with supercritical current density at the axis , 2014 .
[34] V. Gusev,et al. Influence of a plasma jet on different types of tungsten , 2014 .
[35] J. Linke,et al. Investigation of the impact of transient heat loads applied by laser irradiation on ITER-grade tungsten , 2014 .
[36] P. V. Kalinin,et al. Generation of High-Power Sub-THz Waves in Magnetized Turbulent Electron Beam Plasmas , 2014 .
[37] J. Linke,et al. Recrystallization and modification of the stainless-steel surface relief under photonic heat load in powerful plasma discharges , 2013 .
[38] L. Singheiser,et al. Comparison of Thermal Shock Damages Induced by Different simulation Methods on Tungsten , 2013 .
[39] J. Linke,et al. Stainless steel performance under ITER-relevant mitigated disruption photonic heat loads , 2013 .
[40] V. Bataev,et al. Surface modification and droplet formation of tungsten under hot plasma irradiation at the GOL-3 , 2013 .
[41] V. Rohde,et al. Arc erosion on W plasma facing components in ASDEX Upgrade , 2013 .
[42] G. Derevyankin,et al. Novel Injector of Intense Long Pulse Electron Beam for Linear Plasma Devices , 2013 .
[43] G. Derevyankin,et al. Development of Extended Heating Pulse Operation Mode at GOL-3 , 2013 .
[44] M. Thumm,et al. GDMT-T: Superconducting Linear Device for PMI Studies , 2013 .
[45] Y. Tsidulko,et al. Novosibirsk Project of Gas-Dynamic Multiple-Mirror Trap , 2013 .
[46] J. Linke,et al. Investigation of the Impact on Tungsten of Transient Heat Loads Induced by Laser Irradiation, Electron Beams and Plasma Guns , 2013 .
[47] J. Linke,et al. Tungsten and CFC degradation under combined high cycle transient and steady state heat loads , 2012 .
[48] V. Makhlaj,et al. PLASMA-SURFACE INTERACTION AND MECHANISMS OF DUST PRODUCTION IN ITER ELM SIMULATION EXPERIMENTS WITH QSPA Kh-50 , 2012 .
[49] M. Nagata,et al. Surface damage characteristics of CFC and tungsten with repetitive ELM-like pulsed plasma irradiation , 2011 .
[50] S. Brezinsek,et al. Analysis of tungsten melt-layer motion and splashing under tokamak conditions at TEXTOR , 2011 .
[51] R. Neu,et al. Induced tungsten melting events in the divertor of ASDEX Upgrade and their influence on plasma performance , 2011 .
[52] A. Arakcheev,et al. Analytical model of brittle destruction based on hypothesis of scale similarity , 2011, 1105.1928.
[53] G. Miloshevsky,et al. Boiling induced macroscopic erosion of plasma facing components in fusion devices , 2011 .
[54] S. Kuznetsov,et al. Experiments with “Thin” Electron Beam at GOL-3 , 2011 .
[55] V. Kapitonov,et al. Submillisecond Electron Beam for Plasma Heating in Multi-Mirror Trap GOL-3 , 2011 .
[56] M. Makarov,et al. Energy Spectrum of Electrons in Flow from Plasma Column Heated by REB at GOL-3 Facility , 2011 .
[57] S. L. Sinitsky,et al. Concept of Fusion Reactor Based on Multiple-Mirror Trap , 2011 .
[58] V. I. Tereshin,et al. Plasma-Surface Interaction during ITER Type 1 ELMs: Comparison of Simulation with QSPA KH-50 and the GOL-3 Facilities , 2011 .
[59] P. Simonov,et al. Structure Modification of Different Graphite and Glassy Carbon Surfaces under High Power Action by Hydrogen Plasma , 2011 .
[60] S. Polosatkin,et al. Stabilization of Relativistic Electron Beam by Dense Plasma Cloud in GOL-3 Expander , 2011 .
[61] A. Arakcheev,et al. Formation of Small Dust Particles by Brittle Destruction , 2011 .
[62] S. Polosatkin,et al. Diagnostics of heavy impurities at GOL-3 facility , 2010 .
[63] V. I. Tereshin,et al. The latest results from ELM-simulation experiments in plasma accelerators , 2009 .
[64] A. Hyatt,et al. Dust studies in DIII-D and TEXTOR , 2009 .
[65] A. Sagara,et al. Characterization of Dust Particles Ranging in Size from 1 nm to 10 µm Collected in the LHD , 2009 .
[66] A. Loarte,et al. Experimental study of PFCs erosion under ITER-like transient loads at plasma gun facility QSPA , 2009 .
[67] V. I. Tereshin,et al. Experimental study of plasma energy transfer and material erosion under ELM-like heat loads , 2009 .
[68] Gerald Pintsuk,et al. Cracking failure study of ITER-reference tungsten grade under single pulse thermal shock loads at elevated temperatures , 2009 .
[69] A. Loarte,et al. Experimental validation of 3D simulations of tungsten melt erosion under ITER-like transient loads , 2009 .
[70] A. Loarte,et al. Experimental and theoretical investigation of droplet emission from tungsten melt layer , 2009 .
[71] V. I. Tereshin,et al. Damage to preheated tungsten targets after multiple plasma impacts simulating ITER ELMs , 2009 .
[72] S. Polosatkin,et al. Dynamics of Electron Distribution Function in Multiple Mirror TRAP GOL-3 , 2009 .
[73] S. Polosatkin,et al. First Experiments on Neutral Injection in Multimirror Trap GOL-3 , 2009 .
[74] S. S. Popov,et al. Experiments with Large-Mirror-Ratio Corrugation at Multiple Mirror Trap GOL-3 , 2009 .
[75] I. Ivanov,et al. Status and Prospects of GOL-3 Multiple-Mirror Trap , 2009 .
[76] S. Polosatkin,et al. Spectroscopic studies of the interaction of a high-power plasma stream with a solid on the GOL-3 facility , 2008 .
[77] V. Aulchenko,et al. Detector for imaging of explosions: Present status and future prospects with higher energy X-rays , 2008, 0801.2206.
[78] W. Fundamenski,et al. Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation , 2007 .
[79] S. Polosatkin,et al. Use of Pellet Injection Technology at GOL-3 for Plasma Fueling and Plasma-Surface Interaction Research , 2007 .
[80] S. S. Popov,et al. Plasma Heating and Confinement in GOL-3 Multi Mirror Trap , 2007 .
[81] S. Polosatkin,et al. Anomalous Fast Heating of Ions in GOL-3 Facility , 2007 .
[82] V. Boldyrev,et al. Measurement of high pulsed pressures using the shift of ruby fluorescence lines , 2006 .
[83] S. Kuznetsov,et al. Study of the mechanism for fast ion heating in the GOL-3 multimirror magnetic confinement system , 2005 .
[84] M. V. Kuzin,et al. Status of the Siberian synchrotron radiation center , 2005 .
[85] P. Mertens,et al. Identification of molecular carbon sources in the JET divertor by means of emission spectroscopy JET-EFDA contributors, S. Brezinsek, A. Pospieszczyk, M.F. Stamp, A. Meigs, , 2005 .
[86] G. Derevyankin,et al. Progress on the Multimirror Trap GOL-3 , 2005 .
[87] G. Derevyankin,et al. Study of Charge-Exchange Neutrals Emission from Hot Plasma at the Multimirror Trap GOL-3 , 2005 .
[88] S. Polosatkin,et al. Spectral Diagnostics for Plasma Research at the GOL-3 Facility , 2004 .
[89] S. Mirnov,et al. Li-CPS limiter in tokamak T-11M , 2003 .
[90] S. Polosatkin,et al. Plasma Spectroscopy at the Gol-3 Facility , 2003 .
[91] V. D. Stepanov,et al. Multimirror open Trap Gol-3: Recent Results , 2003 .
[92] S. Polosatkin,et al. Experiments Directed to Creation of Hot Plasma with β~1 at the GOL-3-II Facility , 2001 .
[93] J. R. Martin-Solis,et al. Predictions on runaway current and energy during disruptions in tokamak plasmas , 2000 .
[94] A. Arzhannikov,et al. Interaction of Hot Electron Plasma with Solids at the Gol-3 Facility , 1999 .
[95] V. Filippov,et al. Hot electron target interaction experiments at the GOL-3 facility , 1997 .
[96] V. B. Bobylev,et al. Plasma heating by high-energy-content microsecond electron beam at the GOL-3-II facility , 1996 .
[97] W. Kühnlein,et al. THE NEW ELECTRON BEAM FACILITY FOR MATERIALS TESTING IN HOT CELLS - DESIGN AND PRELIMINARY EXPERIENCE , 1995 .
[98] S. G. Voropaev,et al. Test of divertor materials under simulated ITER plasma disruption conditions at the GOL-3 facility , 1994 .
[99] V. Karpman,et al. Nonlinear Effects in the Propagation of Monochromatic VLF Waves (Helicons) in the Magnetosphere , 1971 .
[100] F. Tuinstra,et al. Raman Spectrum of Graphite , 1970 .