Review of Rotor Balancing Methods

This review is dedicated to balancing methods that are used to solve the rotor-balancing problem. To ensure a stable operation over an operating speed range, it is necessary to balance a rotor. The traditional methods, including the influence coefficient method (ICM) and the modal balancing method (MBM) are introduced, and the research progress, operation steps, advantages and disadvantages of these methods are elaborated. The classification of new balancing methods is reviewed. Readers are expected to obtain an overview of the research progress of existing balancing methods and the directions for future studies.

[1]  Gao De-ping.  Research Summary of Rotor Dynamic Characteristics and Dynamic Balance , 2008 .

[2]  R. S. Sharp.  Flexible rotor balancing: A review of principles and practices , 1980 .

[3]  A. S. Sekhar,et al.  Modal balancing of flexible rotors with bow and distributed unbalance , 2013 .

[4]  A G Parkinson,et al.  Balancing of Rotating Machinery , 1991 .

[5]  Yehia A. Khulief,et al.  A New Method for Field-Balancing of High-Speed Flexible Rotors without Trial Weights , 2014 .

[6]  Deng Wang.  High Speed Dynamic Balance Technique Applied to Flexible Rotors of a Small-sized Engine , 2003 .

[7]  Yuan Kang,et al.  A MODIFIED INFLUENCE COEFFICIENT METHOD FOR BALANCING UNSYMMETRICAL ROTOR-BEARING SYSTEMS , 1996 .

[8]  Jianjun Shi,et al.  Active Balancing and Vibration Control of Rotating Machinery: A Survey , 2001 .

[9]  Jian Yang,et al.  Dynamic Balancing of a Centrifuge: Application to a Dual-Rotor System with Very Little Speed Difference , 2004 .

[10]  Zeng Sheng.  The Study of An On-line Automatic Dynamic Balancing System and Its Dynamic Balancing Method When Used on a Flexible Rotor , 2003 .

[11]  A. J. Smalley,et al.  Demonstration of a Unified Approach to the Balancing of Flexible Rotors , 1981 .

[12]  R. D. Marangoni,et al.  Vibration Analysis Of A Motor-Flexible Coupling-Rotor System Subject To Misalignment And Unbalance, Part I: Theoretical Model And Analysis , 1994 .

[13]  D. J. Ewins,et al.  Modal analysis and testing of rotating structures , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[14]  E. J. Gunter,et al.  Review: Rotor balancing , 1998 .

[15]  Li Yan,et al.  Principle and application of no trial weight field balancing for a rotating machinery , 2010 .

[16]  Liangsheng Qu,et al.  The holospectrum: A new method for rotor surveillance and diagnosis , 1989 .

[17]  H. D. Nelson,et al.  Complex modal balancing of flexible rotors including residual bow , 1988 .

[18]  E. J. Gunter,et al.  Effect of Residual Shaft Bow on Unbalance Response and Balancing of a Single Mass Flexible Rotor—Part I: Unbalance Response , 1976 .

[19]  Torsten Söderström,et al.  Unbalance estimation using linear and nonlinear regression , 2010, Autom..

[20]  Thomas P. Goodman,et al.  A Least-Squares Method for Computing Balance Corrections , 1964 .

[21]  Liangsheng Qu,et al.  THE OPTIMIZATION TECHNIQUE-BASED BALANCING OF FLEXIBLE ROTORS WITHOUT TEST RUNS , 2000 .

[22]  Liu Gangq.  Balancing Method of Flexible Rotor Across Second Order Without Trial Weights , 2014 .

[23]  Rajiv Tiwari,et al.  Simultaneous identification of residual unbalances and bearing dynamic parameters from impulse responses of rotor-bearing systems , 2006 .

[24]  Mark S. Darlow.  Balancing of high-speed machinery: Theory, methods and experimental results , 1987 .

[25]  Miguel A. Alonso,et al.  A Reliable Turning Process by the Early Use of a Deep Simulation Model at Several Manufacturing Stages , 2017 .

[26]  J. S. Rao.  A note on Jeffcott warped rotor , 2001 .

[27]  A. J. Smalley,et al.  Balancing flexible rotating shafts with an initial bend , 1984 .

[28]  Izhak Bucher,et al.  Dynamic balancing of super-critical rotating structures using slow-speed data via parametric excitation , 2017, 1704.08530.

[29]  G. Urbikain,et al.  Stability and vibrational behaviour in turning processes with low rotational speeds , 2015 .

[30]  Genfeng Lang.  Phase Compensation Method of Holobalancing , 2014 .

[31]  Yuan Kang,et al.  Development and modification of a unified balancing method for unsymmetrical rotor-bearing systems , 1997 .

[32]  Mikhail Guskov,et al.  Multi-dimensional harmonic balance applied to rotor dynamics , 2008 .

[33]  A. Turpin,et al.  Balancing of Rotors Supported on Bearings Having Nonlinear Stiffness Characteristics , 1994 .

[34]  Paul E. Allaire,et al.  Balancing of Flexible Rotors Using Convex Optimization Techniques : Optimum Min-Max LMI Influence Coefficient Balancing , 2008 .

[35]  Jiao Ye-qiu.  Experimentd Investigation of Local balanced technique for large Aeroengine Rotor , 2008 .

[36]  R. H. Badgley,et al.  Flexible Rotor Balancing by the Exact Point-Speed Influence Coefficient Method , 1970 .

[37]  W. Kellenberger,et al.  Should a Flexible Rotor Be Balanced in N or (N + 2) Planes? , 1972 .

[38]  Nicholas A J Lieven,et al.  Bifurcation analysis of an automatic dynamic balancing mechanism for eccentric rotors , 2006 .

[39]  MB Deepthikumar,et al.  Balancing of flexible rotor with bow using transfer matrix method , 2014 .

[40]  Cao Shuqian.  TRANSFER FUNCTION TECHNIQUE OF DYNAMIC BALANCING FOR HIGH-SPEED ROTORS , 2002 .

[41]  Dong-Ju Han,et al.  Generalized modal balancing for non-isotropic rotor systems , 2007 .

[42]  J. Der Hagopian,et al.  On the balancing of flexible rotating machines by using an inverse problem approach , 2011 .

[43]  E. L. THEARLE.  Dynamic Balancing of Rotating Machinery in the Field , .

[44]  Zhixin Zhang.  STUDY ON WHOLE MACHINE BALANCING METHOD FOR COAXIAL DUAL-ROTOR SYSTEM WITH LITTLE ROTATING SPEED DIFFERENCE , 2004 .