A 2$\,\times\,$ 2 Split Cross-Bar Optical Switch Using a Hybrid Actuation Configuration

In this paper, a 2 × 2 split cross-bar optical switch which employs a hybrid actuation configuration is presented. The main advantages of this proposed switch include low actuation voltage, low power consumption, and easy fiber alignment. This optical switch consists of a micromachined micro-mirror structure and a mini-actuator module. The micro-mirror structure, which comprises two movable vertical mirrors with cantilevers, two fixed vertical mirrors, and light-path trenches, is realized by using a simple KOH silicon etching process. The mini-actuator module, which includes two commercially-available electromagnetic bistable actuators attached with L-shaped arms, is used to actuate micro-mirrors. The measured insertion losses of the proposed switch is between -1- -1.2 dB, the cross-talk is about -60 dB, and the switching time is less than 13 ms. The long-term reliability test of the SCB switch is performed by continuously actuating the device for 10 000 cycles at 1 Hz, and the deviation of the measured insertion loss is less than 0.05 dB.

[1]  Wei-Hua Chieng,et al.  Precision alignment of mask etching with respect to crystal orientation , 1998 .

[2]  G. Ensell.  Alignment of mask patterns to crystal orientation , 1996 .

[3]  Clinton Randy Giles,et al.  The Lucent LambdaRouter: MEMS technology of the future here today , 2002, IEEE Commun. Mag..

[4]  C. Hibert,et al.  Fabrication of vertical digital silicon optical micromirrors on suspended electrode for guided-wave optical switching applications , 2005 .

[5]  C. R. Giles,et al.  Beam-steering micromirrors for large optical cross-connects , 2003 .

[6]  Kuang-Chao Fan,et al.  A ${N} \times {N}$ Architecture for 2-D Mirror-Type Optical Switches , 2009, Journal of Lightwave Technology.

[7]  Geng-Sheng Kuo,et al.  A Novel Integrated Multistage 2-D MEMS Optical Switch With Spanke–Benes Architecture , 2008, Journal of Lightwave Technology.

[8]  Hiroyuki Fujita,et al.  Self-aligned vertical mirror and V-grooves applied to an optical-switch: modeling and optimization of bi-stable operation by electromagnetic actuation , 2001 .

[9]  C. Corcoran,et al.  Electromagnetically actuated mirror arrays for use in 3-D optical switching applications , 2004, Journal of Microelectromechanical Systems.

[10]  Ai Qun Liu,et al.  Advanced fiber optical switches using deep RIE (DRIE) fabrication , 2003 .

[11]  K. Fan,et al.  A 2$\,\times\,$ 2 Mechanical Optical Switch With a Thin MEMS Mirror , 2009, Journal of Lightwave Technology.

[12]  Y. Yang,et al.  A novel 2 × 2 MEMS optical switch using the split cross-bar design , 2007 .

[13]  Chang-Hyeon Ji,et al.  Electromagnetic 2/spl times/2 MEMS optical switch , 2004 .

[14]  M. Gretillat,et al.  Vertical mirrors fabricated by deep reactive ion etching for fiber-optic switching applications , 1997 .

[15]  Zhilin Huang,et al.  Latching micromagnetic optical switch , 2006 .

[16]  H. Fujita,et al.  Electrostatic micro torsion mirrors for an optical switch matrix , 1996 .

[17]  D.T. Neilson,et al.  256/spl times/256 port optical cross-connect subsystem , 2004, Journal of Lightwave Technology.

[18]  Ming C. Wu,et al.  Optical MEMS for Lightwave Communication , 2006, Journal of Lightwave Technology.

[19]  Baokun Xu,et al.  Study of a 2 × 2 MOEMS optical switch with electrostatic actuating , 2005 .

[20]  O. Powell,et al.  Anisotropic etching of {100} and {110} planes in (100) silicon , 2001 .

[21]  S. Safavi-Naeini,et al.  A Scalable $1\times N$ Optical MEMS Switch Architecture Utilizing a Microassembled Rotating Micromirror , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[22]  J. Bowers,et al.  Three-dimensional MEMS photonic cross-connect switch design and performance , 2003 .

[23]  Yilong Hao,et al.  Novel Multifunctional Device for Optical Power Splitting, Switching, and Attenuating , 2008, IEEE Photonics Technology Letters.