Design and analysis of tactile optical sensor for endovascular surgery

In this paper, design and Finite Element analysis of a new tactile optical sensor for the measurement of contact-pressure and tissue compliance in endovascular surgeries are presented. Using Micro-Electro-Mechanical-Systems (MEMS) technology, this sensor can be fabricated and integrated with the medical tools for endovascular surgeries such as Catheter tool. The designed sensor is capable of detecting the magnitude of the applied forces, the pressure distribution on contact objects, and also estimating the compliance of the contact tissue. The designed sensor is made of three layers, the upper layer is fabricated from monocrystalline silicon to form silicon membranes, the middle layer which is the supporting element is fabricated from both silicon and silicone rubber as a soft material and the lower layer is a supporting Plexiglas substrate to connect the designed sensor to the optical fibers. Simulation results show that for the given contact forces, the magnitude and the distribution of contacting tissues pressure along with tissue compliance can be determined. This sensor as proposed is a good candidate for batch micromachining, which is yet another commercial advantage for this design. Because of its less expensive cost, the surgeon can use it as a disposal part of the endovascular tools, requiring no re-sterilization and reducing the cost of surgery.

[1]  Javad Dargahi,et al.  A novel method in measuring the stiffness of sensed objects with applications for biomedical robotic systems , 2006, The international journal of medical robotics + computer assisted surgery : MRCAS.

[2]  Roger W. Brockett,et al.  The performance of a deformable-membrane tactile sensor: basic results on geometrically-defined tasks , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[3]  L. Way,et al.  Fundamentals of laparoscopic surgery , 1995 .

[4]  Joseph T. Boyd,et al.  Novel MEMS pressure and temperature sensors fabricated on optical fibers , 2002 .

[5]  S. Payandeh,et al.  A micromachined piezoelectric tactile sensor for an endoscopic grasper-theory, fabrication and experiments , 2000, Journal of Microelectromechanical Systems.

[6]  S. Shankar Sastry,et al.  Applications of micromechatronics in minimally invasive surgery , 1998 .

[7]  Robert D. Howe,et al.  A tactile sensor for localizing transient events in manipulation , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[8]  F. Baldini,et al.  Biomedical sensors using optical fibres , 1996 .

[9]  Anbo Wang,et al.  A novel temperature-insensitive optical fiber pressure sensor for harsh environments , 2005, IEEE Photonics Technology Letters.

[10]  Fabry-Perot pressure sensor arrays for imaging surface pressure distributions , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[11]  Enhanced wavelength tuning of laterally loaded FBG strain sensors through optimization of the pressure transmitting system , 2005 .

[12]  D. Wagner,et al.  Optical pressure sensor using two Mach-Zehnder interferometers for the TE and TM polarization , 1994 .

[13]  T. Fukuda,et al.  Micro force sensor for intravascular neurosurgery and in vivo experiment , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[14]  Greg Gbur,et al.  The rayleigh range of gaussian schell-model beams , 2001 .

[15]  J U Meyer,et al.  Intelligent surgical instrument system ISIS. Concept and preliminary experimental application of components and prototypes. , 1993, Endoscopic surgery and allied technologies.

[16]  D. Abeysinghe,et al.  A novel MEMS pressure sensor fabricated on an optical fiber , 2001, IEEE Photonics Technology Letters.

[17]  Masahiro Ohka,et al.  An Experimental Optical Three-axis Tactile Sensor for Micro-Robots , 2005, Robotica.

[18]  Masayoshi Esashi,et al.  Ultra-miniature fiber-optic pressure sensor using white light interferometry , 2005 .

[19]  Peter C. Y. Chen,et al.  Force Sensing and Control in Micromanipulation , 2006, IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews).

[20]  Jeffrey M. Wendlandt,et al.  Milli Robotics for Endoscopy , 1994 .

[21]  Baoqing Li,et al.  Diaphragm design guidelines and an optical pressure sensor based on MEMS technique , 2006, Microelectron. J..

[22]  Hongpu Li,et al.  Optical MEMS pressure sensor based on Fabry-Perot interferometry. , 2006, Optics express.