Innovative Methodology of On-Line Point Cloud Data Compression for Free-Form Surface Scanning Measurement

[1]  Pralay Pal,et al.  Object shape reconstruction through NURBS surface interpolation , 2007 .

[2]  Enrico Vezzetti,et al.  Reverse engineering of free-form surfaces: A methodology for threshold definition in selective sampling , 2006 .

[3]  Jing Wu,et al.  A novel method for 3D reconstruction: Division and merging of overlapping B-spline surfaces , 2016, Comput. Aided Des..

[4]  Pasquale Arpaia,et al.  A two-domain real-time algorithm for optimal data reduction: a case study on accelerator magnet measurements , 2010 .

[5]  Cristina Bignardi,et al.  Osteoporotic hip fracture prediction: is T-score based criterion enough? A Hip Structural Analysis based model. , 2018, Journal of biomechanical engineering.

[6]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[7]  Janko Hodolic,et al.  Development of a programme system for data-point pre-processing in Reverse Engineering , 2005 .

[8]  Qing Liu,et al.  Adaptive simplification of point cloud using k-means clustering , 2011, Comput. Aided Des..

[9]  Yan Li,et al.  On-line point cloud data extraction algorithm for spatial scanning measurement of irregular surface in copying manufacture , 2016 .

[10]  Scott Schaefer,et al.  Progressive encoding and compression of surfaces generated from point cloud data , 2012, Comput. Graph..

[11]  Hsien-I Lin,et al.  Innovative Methodology for Multi-View Point Cloud Registration in Robotic 3D Object Scanning and Reconstruction , 2016 .

[12]  Ye Tao,et al.  A simple point cloud data reduction method based on Akima spline interpolation for digital copying manufacture , 2013 .

[13]  Stephen C. Veldhuis,et al.  Isoparametric line sampling for the inspection planning of sculptured surfaces , 2005, Comput. Aided Des..

[14]  Jia Zhenyuan,et al.  Self-learning fuzzy control of scan tracking measurement in copying manufacture , 2010 .

[15]  Xueqing Li,et al.  Progressive point set surface compression based on planar reflective symmetry analysis , 2015, Comput. Aided Des..

[16]  Di Bai,et al.  3-D Point Cloud Registration Algorithm Based on Greedy Projection Triangulation , 2018, Applied Sciences.

[17]  Francisco Cavas-Martínez,et al.  Study of Morpho-Geometric Variables to Improve the Diagnosis in Keratoconus with Mild Visual Limitation , 2018, Symmetry.

[18]  Hsi-Yung Feng,et al.  Extracting sectional contours from scanned point clouds via adaptive surface projection , 2017, Int. J. Prod. Res..

[19]  Junyan Liu,et al.  An Investigation of the High Efficiency Estimation Approach of the Large-Scale Scattered Point Cloud Normal Vector , 2018 .

[20]  José García Rodríguez,et al.  Geometric 3D point cloud compression , 2014, Pattern Recognit. Lett..

[21]  Jean Pauwels,et al.  The study of the stability of reference materials by isochronous measurements , 1998 .

[22]  Chen Feng,et al.  FasTFit: A fast T-spline fitting algorithm , 2017, Comput. Aided Des..

[23]  Fei Zhang,et al.  Data Reduction Based on Bi-Directional Point Cloud Slicing for Reverse Engineering , 2010 .

[24]  Ye Tao,et al.  Optimal design of motion control for scan tracking measurement: A CMAC approach , 2013 .

[25]  Zhenyuan Jia,et al.  Data sampling and processing for contact free-form surface scan-tracking measurement , 2010 .

[26]  Hou-Xing Zhou,et al.  A Hermite Inter/Extrapolation Scheme for MoM Matrices Over a Frequency Band , 2009, IEEE Antennas and Wireless Propagation Letters.

[27]  Xie Han,et al.  Point cloud simplification with preserved edge based on normal vector , 2015 .

[28]  Branimir Barišić,et al.  Accuracy improvement of point data reduction with sampling-based methods by Fuzzy logic-based decision-making , 2011 .

[29]  Zhenyuan Jia,et al.  Influence of incident angle on distance detection accuracy of point laser probe with charge-coupled device: prediction and calibration , 2012 .

[30]  T. Suk,et al.  Data Reduction Methods for Reverse Engineering , 2001 .

[31]  Wen-long Li,et al.  A case study of blade inspection based on optical scanning method , 2015 .

[32]  Cristina Bignardi,et al.  A novel image processing technique for 3D volumetric analysis of severely resorbed alveolar sockets with CBCT. , 2017, Minerva stomatologica.

[33]  S. Carmignato,et al.  Accuracy of industrial computed tomography measurements: Experimental results from an international comparison , 2012 .

[34]  Alan M. McIvor,et al.  Accurate 3D measurement using a structured light system , 1998, Image Vis. Comput..

[35]  K. Fan,et al.  A long-stroke 3D contact scanning probe for micro/nano coordinate measuring machine , 2016 .

[36]  C. Bignardi,et al.  Additively manufactured custom load-bearing implantable devices: Grounds for caution , 2017 .

[37]  Xinhui Ma,et al.  Shape preserving data reduction for 3D surface points , 2011, Comput. Aided Des..

[38]  Tania Landes,et al.  From Point Clouds to Building Information Models: 3D Semi-Automatic Reconstruction of Indoors of Existing Buildings , 2017 .

[39]  Hsi-Yung Feng,et al.  A progressive point cloud simplification algorithm with preserved sharp edge data , 2009 .

[40]  Shugui Liu,et al.  T-spline based unifying registration procedure for free-form surface workpieces in intelligent CMM , 2017 .

[41]  Rita Ambu,et al.  Advanced 3D Photogrammetric Surface Reconstruction of Extensive Objects by UAV Camera Image Acquisition , 2018, Sensors.