Shape and Size Synthesis of Compliant Mechanisms Using Wide Curve Theory

A wide curve is a curve with width or cross section. This paper introduces a shape and size synthesis method for compliant mechanisms based on free-form wide curve theory. With the proposed method, detailed dimensions synthesis can be performed to further improve the performance after the topology is selected. Every connection in the topology is represented by a parametric wide curve in which variable shape and size are fully described and conveniently controlled by the limited number of parameters. The shape and size synthesis is formulated as the optimization of the control parameters of wide curves corresponding to all connections in the topology. Problem-dependent objectives are optimized and practical constraints are imposed during the optimization process. The optimization problem is solved by the constrained nonlinear programing algorithm in the MATLAB Optimization Toolbox. Two examples are included to demonstrate the effectiveness of the proposed synthesis procedure.

[1]  G. K. Ananthasuresh,et al.  Optimal Synthesis Methods for MEMS , 2003 .

[2]  T. Ray,et al.  Design Synthesis of Path Generating Compliant Mechanisms by Evolutionary Optimization of Topology and Shape , 2002 .

[3]  R. Parsons,et al.  Digital Object Identifier (DOI) 10.1007/s00158-002-0216-0 , 2000 .

[4]  David Salomon,et al.  Computer Graphics and Geometric Modeling , 1999, Springer New York.

[5]  Thomas F. Coleman,et al.  Optimization Toolbox User's Guide , 1998 .

[6]  B. Zettl,et al.  On Systematic Errors of Two-Dimensional Finite Element Modeling of Right Circular Planar Flexure Hinges , 2005 .

[7]  G. Farin.  Curves and Surfaces for Cagd: A Practical Guide , 2001 .

[8]  M. Jakiela,et al.  Genetic algorithm-based structural topology design with compliance and topology simplification considerations , 1996 .

[9]  G. K. Ananthasuresh,et al.  Designing compliant mechanisms , 1995 .

[10]  Yong Mo Moon,et al.  DESIGN OF LARGE-DISPLACEMENT COMPLIANT JOINTS , 2005 .

[11]  Leonid M. Mestetskii.  Fat curves and representation of planar figures , 2000, Comput. Graph..

[12]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[13]  N. Kikuchi,et al.  A homogenization method for shape and topology optimization , 1991 .

[14]  Larry L. Howell,et al.  The topological synthesis of compliant mechanisms , 1996 .

[15]  G. K. Ananthasuresh,et al.  Topology Synthesis of Compliant Mechanisms for Nonlinear Force-Deflection and Curved Path Specifications , 2001 .

[16]  Fujio Yamaguchi,et al.  Curves and Surfaces in Computer Aided Geometric Design , 1988, Springer Berlin Heidelberg.

[17]  Larry L. Howell,et al.  On the Nomenclature, Classification, and Abstractions of Compliant Mechanisms , 1994 .

[18]  A. Saxena.  Synthesis of Compliant Mechanisms for Path Generation using Genetic Algorithm , 2005 .

[19]  Kwun-Lon Ting,et al.  Topological Synthesis of Compliant Mechanisms Using Spanning Tree Theory , 2005 .

[20]  A. Midha,et al.  Parametric Deflection Approximations for End-Loaded, Large-Deflection Beams in Compliant Mechanisms , 1995 .

[21]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[22]  M. Jakiela,et al.  Continuum structural topology design with genetic algorithms , 2000 .

[23]  Sridhar Kota,et al.  Strategies for systematic synthesis of compliant mems , 1994 .

[24]  Kazuhiro Saitou,et al.  Genetic algorithms as an approach to configuration and topology design , 1994, DAC 1993.

[25]  Larry L. Howell,et al.  A Loop-Closure Theory for the Analysis and Synthesis of Compliant Mechanisms , 1996 .

[26]  Larry L. Howell,et al.  Compliant Joint Design Principles for High Compressive Load Situations , 2005 .

[27]  O. Sigmund,et al.  Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[28]  Larry L. Howell,et al.  A Three Degree-of-Freedom Model for Self-Retracting Fully Compliant Bistable Micromechanisms , 2005 .

[29]  Sridhar Kota,et al.  Topological Synthesis of Compliant Mechanisms Using Linear Beam Elements* , 2000 .

[30]  Sridhar Kota,et al.  An Energy Formulation for Parametric Size and Shape Optimization of Compliant Mechanisms , 1999 .

[31]  Larry L. Howell,et al.  Bistable Configurations of Compliant Mechanisms Modeled Using Four Links and Translational Joints , 2004 .

[32]  T. E. Bruns,et al.  Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .

[33]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[34]  Mary Frecker,et al.  Dynamic Topology Optimization of Compliant Mechanisms and Piezoceramic Actuators , 2004 .

[35]  Nicolae Lobontiu,et al.  Circular-Hinge Line Element for Finite Element Analysis of Compliant Mechanisms , 2005 .

[36]  G. K. Ananthasuresh,et al.  Design and Fabrication of Microelectromechanical Systems , 1994 .

[37]  Larry L. Howell,et al.  A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots , 1994 .

[38]  Larry L. Howell,et al.  Identification of compliant pseudo-rigid-body four-link mechanism configurations resulting in bistable behavior , 2003 .

[39]  G. K. Ananthasuresh,et al.  Freeform Skeletal Shape Optimization of Compliant Mechanisms , 2001, Adaptive Structures and Material Systems.

[40]  Kang Tai,et al.  Design of structures and compliant mechanisms by evolutionary optimization of morphological representations of topology , 2000 .

[41]  Larry L. Howell,et al.  Dynamic Modeling of Compliant Mechanisms Based on the Pseudo-Rigid-Body Model , 2005 .

[42]  G. K. Ananthasuresh,et al.  A Novel Compliant Mechanism for Converting Reciprocating Translation Into Enclosing Curved Paths , 2004 .