Mechanical properties of neutron-irradiated nickel-containing martensitic steels: II. Review and analysis of helium-effects studies

Abstract In part I of this helium-effects study on ferritic/martensitic steels, results were presented on tensile and Charpy impact properties of 9Cr–1MoVNb (modified 9Cr–1Mo) and 12Cr–1MoVW (Sandvik HT9) steels and these steels containing 2% Ni after irradiation in the High Flux Isotope Reactor (HFIR) to 10–12 dpa at 300 and 400 °C and in the Fast Flux Test Facility (FFTF) to 15 dpa at 393 °C. The results indicated that helium caused an increment of hardening above irradiation hardening produced in the absence of helium. In addition to helium-effects studies on ferritic/martensitic steels using nickel doping, studies have also been conducted over the years using boron doping, ion implantation, and spallation neutron sources. In these previous investigations, observations of hardening and embrittlement were made that were attributed to helium. In this paper, the new results and those from previous helium-effects studies are reviewed and analyzed.

[1]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .

[2]  X. Jia,et al.  Small punch tests on martensitic/ferritic steels F82H, T91 and Optimax-A irradiated in SINQ Target-3 , 2003 .

[3]  Eal H. Lee,et al.  Modification of radiation damage microstructure by helium , 1983 .

[4]  T. Byun,et al.  Tensile properties of candidate SNS target container materials after proton and neutron irradiation in the LANSCE accelerator , 2001 .

[5]  R. Klueh,et al.  Microstructural evolution of nickel-doped 9Cr steels irradiated in HFIR , 2002 .

[6]  A. Hishinuma,et al.  Low-temperature irradiation effects on tensile and Charpy properties of low-activation ferritic steels , 2000 .

[7]  R. Klueh,et al.  High-Chromium Ferritic and Martensitic Steels for Nuclear Applications , 2001 .

[8]  A. Kimura,et al.  Effects of Nickel Addition on Microstructural Evolution and Mechanical Properties of Reduced Activation Martensitic Steels Irradiated in the ATR-A1 , 2005 .

[9]  D. Harries,et al.  Non-equilibrium segregation in metals and alloys , 1980, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[10]  Brian D. Wirth,et al.  Multiscale modeling of radiation damage in Fe-based alloys in the fusion environment , 2004 .

[11]  D. Gelles,et al.  An experimental method to determine the role of helium in neutron-induced microstructural evolution , 1979 .

[12]  R. Klueh,et al.  Heat treatment effects on impact toughness of 9Cr-1MoVNb and 12Cr-1MoVW steels irradiated to 100 dpa , 1998 .

[13]  L. Greenwood,et al.  A new calculation of thermal neutron damage and helium production in nickel , 1983 .

[14]  K. Farrell.  Experimental effects of helium on cavity formation during irradiation—a review , 1980 .

[15]  R. Klueh,et al.  Impact behavior of 9-Cr and 12-Cr ferritic steels after low-temperature irradiation , 1988 .

[16]  F. Garner,et al.  Influence of radiation on material properties: ASTM 13th international symposium (Part II) , 1987 .

[17]  E. E. Bloom,et al.  Radiation facilities for fusion-reactor first-wall and blanket structural-materials development , 1982 .

[18]  J. Aktaa,et al.  Embrittlement behaviour of low-activation alloys with reduced boron content after neutron irradiation , 2003 .

[19]  Akira Kohyama,et al.  Low-activation ferritic and martensitic steels for fusion application , 1996 .

[20]  X. Jia,et al.  The impact of irradiation temperature on the microstructure of F82H martensitic/ferritic steel irradiated in a proton and neutron mixed spectrum , 2002 .

[21]  Y. Dai,et al.  Mechanical properties of modified 9Cr–1Mo (T91) irradiated at ⩽300 °C in SINQ Target-3 , 2003 .

[22]  Ronald L. Klueh,et al.  Embrittlement of 9Cr-1MoVNb and 12Cr-1MoVW steels irradiated in HFIR , 1992 .

[23]  R. Klueh,et al.  Effect of irradiation in HFIR on tensile properties of Cr-Mo steels , 1992 .

[24]  Anton Möslang,et al.  Influence of helium on impact properties of reduced-activation ferritic/martensitic Cr-steels , 1999 .

[25]  Ronald L. Klueh,et al.  Embrittlement of CrMo steels after low fluence irradiation in HFIR , 1995 .

[26]  Thak Sang Byun,et al.  Tensile properties of ferritic/martensitic steels irradiated in HFIR, and comparison with spallation irradiation data , 2003 .

[27]  W. C. Leslie,et al.  The physical metallurgy of steels , 1981 .

[28]  L. J. Bonis,et al.  Fundamental phenomena in the materials sciences. , 2012, Science.

[29]  Peter Jung,et al.  Microstructural analysis of 9% Cr martensitic steels containing 0.5 at.% helium , 2003 .

[30]  M. L. Hamilton,et al.  Effects of radiation on materials: 18. international symposium , 1990 .

[31]  H. Matsui,et al.  Enhancement of irradiation hardening by nickel addition in the reduced-activation 9Cr–2W martensitic steel , 1998 .

[32]  T. Williams,et al.  The segregation of boron to grain boundaries in solution-treated Type 316 austenitic stainless steel , 1976 .

[33]  F. B. Pickering,et al.  Physical metallurgy and the design of steels , 1978 .

[34]  Michael Rieth,et al.  Embrittlement behaviour of different international low activation alloys after neutron irradiation , 1998 .

[35]  Y. Dai,et al.  Tensile properties of 9Cr–1Mo martensitic steel irradiated with high energy protons and neutrons , 2003 .

[36]  B. M. Oliver,et al.  Neutronics calculation, dosimetry analysis and gas measurements of the first SINQ target irradiation experiment, STIP-I , 2003 .

[37]  Peter Jung,et al.  Effect of implanted helium on tensile properties and hardness of 9% Cr martensitic stainless steels , 2003 .

[38]  D. Bacon,et al.  Atomic modelling of strengthening mechanisms due to voids and copper precipitates in α-iron , 2003 .

[39]  R. Stoller,et al.  Isotopic alloying to tailor helium production rates in mixed-spectrum reactors , 1986 .

[40]  R. Williams.  Concerning the question of recovery before recrystallization , 1976 .

[41]  R. Klueh,et al.  Helium effects on void formation in 9Cr-1MoVNb and 12Cr-1MoVW irradiated in HFIR☆ , 1986 .

[42]  A. M. Dvoriashin,et al.  Microstructure, irradiation hardening and embrittlement of 13Cr2MoNbVB ferritic—martensitic steel after neutron irradiation at low temperatures , 1996 .

[43]  R. Klueh,et al.  Fluence and helium effects on the tensile properties of ferritic steels at low temperatures , 1989 .

[44]  Eal H. Lee,et al.  Helium and hydrogen induced hardening in 316LN stainless steel , 2000 .